Impacts of Production Reduction in European Aluminium Smelters on China's Primary Aluminium Imports

게시됨: Aug 25, 2022 10:06 (GMT+8)
출처: SMM
The sluggish supply and demand of aluminium in Europe failed meet the local terminal demand. Therefore, the demand for imported aluminium semis and aluminium products might increase, boosting the export of relevant products in China and other countries.

SHANGHAI, Aug 25 (SMM) - According to customs data, China imported 51,037.4 mt of primary aluminium in July 2022, a month-on-month increase of 79.1% and a year-on-year decrease of 72%. Imports of primary aluminium from January to July totalled 248,273.2 mt, down 73.2% on the year.

In terms of export, China exported 7,588.5 mt of primary aluminium in July, an increase of 14.6% month-on-month and 1665% year-on-year.

Altogether, China's net imports of primary aluminium stood at 43,448.95 mt in July 2022, up 98.6% from June and down 76.1% from the previous year. The net imports from January to July was 63,987.95 mt, a year-on-year decrease of 93%.

Since the scale of domestic primary aluminium exports was small, and China was actually a net importer of primary aluminium, SMM will focus on the primary aluminium imports in the following analysis.

According to SMM analysis, the main reason for the 79.1% month-on-month increase in domestic primary aluminium imports in July was that aluminium prices at China and abroad both fell sharply in June, with LME aluminium leading the decline. As a result, the domestic import window of aluminium ingot was forced open, and the import losses were narrowed to below 100 yuan/mt, under which circumstances overseas traders took the opportunity to ship cargoes to the Chinese market. In addition, the United States raised interest rates dramatically in July. Amid the downturn of the overseas economy, the overseas demand for aluminium was poor, thus some local suppliers were again focused on domestic consumption.

From the perspective of trade models, general trade accounted for 64.7% of total domestic imports of primary aluminium in July. At the same time, processing trade with supplied/imported materials increased significantly, accounting for 22.1% of the total imports. In particular, imports from Rusal to Hebei and Henan provinces were mainly processing trade with supplied materials.

From the perspective of suppliers, Russia was the top supplier of domestic primary aluminium imports, with a import volume of 39,100 mt, accounting for 76.5% of the total imports. The imported aluminium ingots from India amounted to 4,900 mt, up 390% from June.

SMM expects that domestic primary aluminium imports will maintain a slight growth in August, and the net import volume is estimated to drop to about 30,000 mt. The main reasons behind are provided as follows.

First, both domestic and overseas aluminium prices slumped in July amid the bearish sentiment caused by the US interest rate hikes and the macroeconomic recession. In particular, the prices of domestic aluminium declined further than that of overseas, promoting the SHFE/LME aluminium price ratio to trend lower. As the import losses of primary aluminium expanded in July compared with June, there was no chance for overseas aluminium ingots to flow to China.

Second, the domestic aluminium downstream processing sector was in the off-season in August, and the average operating rate of aluminium processing enterprises stayed low due to high temperatures and power rationing. As a result, the domestic inventory of aluminium accumulated, and the domestic demand for overseas aluminium also weakened.

Looking ahead, the imports between September and December will be greatly affected by the domestic and overseas aluminium prices in August. SMM expects that China will hardly maintain net imports in the future, mainly because the growth rate of domestic aluminium operating capacity has slowed down since August. In addition, 1 million mt of aluminium operating capacity in Sichuan province was suspended due to power rationing. Therefore, the domestic output of aluminium shank in August, easing the pressure on the supply side. However, when the power restriction on downstream enterprises is lifted in the future, there is also possibilities that they will import aluminium to restock. It should also be pointed out that high prices of energy resulting from the energy shortage in Europe have weighted on the output of overseas aluminium smelters and downstream processing enterprises. The sluggish supply and demand of aluminium in Europe failed meet the local terminal demand. Therefore, the demand for imported aluminium semis and aluminium products might increase, boosting the export of relevant products in China and other countries.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
7시간 전
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
더 보기
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9월 20일, 허난 이루이 신소재 기술 유한공사의 연간 72만 톤 알루미늄 기반 신소재 스마트 제조 프로젝트의 후판 조압연기가 정식으로 가동되었다. 총 투자액 15억 위안 규모의 이 프로젝트는 기존 공장 부지를 활용하여 국제적으로 앞선 "1+4" 열간 연속 압연 라인을 구축했으며, 푸셔식 재가열로 등 업계 선도적인 알루미늄 가공 설비를 갖추고 있다. 또한 압연력, 온도 등 핵심 생산 파라미터를 실시간으로 모니터링하고 동적으로 조절할 수 있는 산업용 사물인터넷 시스템을 구축하여 고급 알루미늄 제품의 품질 안정성을 효과적으로 보장하고 고부가가치 제품의 시장 점유율을 지속적으로 확대하고 있다.
7시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
7시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
더 보기
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니는 글렌코어와의 협력을 알루미나 정제, 에너지, 금, 비철금속 분야로 확대할 계획이며, 광업 수익 확대, 광물 자원의 현지 가공 및 산업화 촉진, 중국·중동 및 기타 지역 시장 및 국제 광산 기업과의 협력 강화를 목표로 한다.
7시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
7시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
더 보기
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
9월 21일, 디항그룹 산하 딩펑알루미늄제조(캄보디아)유한회사 2단계(A3 프로젝트) 기공식이 거행되었다. 캄보디아 캄퐁참주 6번 도로 특별경제구역에 위치한 딩펑알루미늄은 고급 합금 알루미늄 봉, 고급 알루미늄 프로파일 및 신에너지 자동차 부속 제품의 연구개발과 생산을 주력으로 하며, 용해·주조, 압출, 양극산화, 심가공, 정밀가공, 표면처리를 아우르는 전 공정 생산라인과 설비를 갖추고 있다. 2단계가 완전 가동되면 연간 생산능력은 20만 톤, 연간 생산액은 최대 7억 달러에 달할 전망이다. 2단계(A3 프로젝트)에는 24,340㎡ 규모의 신에너지 자동차 가공공장(단층 철골구조), 15,291㎡ 규모의 압출공장, 그리고 사무동, 경비실, 배전실 등 부대시설이 포함될 예정이다.
7시간 전