Imports of Unwrought Aluminium Alloy Fell MoM, while Exports Increased Nearly 50% MoM

게시됨: Aug 24, 2022 10:36 (GMT+8)
출처: SMM
Traders are bullish on the market outlook, so the new orders have been rising recently. It is expected that the imported arrivals of aluminium alloy ingots after September will be more than those in July and August.

SHANGHAI, Aug 24 (SMM) - Customs data showed that China imported 102,900 mt of unwrought aluminium alloy in July 2022, a year-on-year increase of 17% and a month-on-month decline of 13%. The imports totalled 770,700 mt from January to July, up 34.5% on the year. In terms of export, China exported 25,500 mt of unwrought aluminium alloy in July, up 179% from the previous year and 49.9% from the previous month. From January to July, the total exports stood at 126,300 mt, a year-on-year growth of 35.7%.

The top three suppliers of unwrought aluminium alloy imports in July were Malaysia, South Korea and Thailand, the imports of which accounted for nearly half of the total volume. Among them, the import volume from Malaysia remained the largest, which was 30,600 mt, down 10,000 mt from June; imports from South Korea amounted to 10,700 mt, an increase of 2,000 mt from June. It should be pointed out that the imports from South Korean returned to more than 10,000 mt, but was still lower than the normal level; imports from Thailand increased slightly from June by 1,300 mt to 10,200 mt.. In addition, July marked the third consecutive month when the imports from Russian Federation hovered around 10,000 mt. Import volume from other countries such as Vietnam and India declined to varying degrees compared the the month before. As for exports, China exported 7,700 mt of unwrought aluminium alloy to Japan in July, which was flat from that in June, and the exports to South Korea increased to 6,300 mt

China’s top three importing provinces of unwrought aluminium alloys in July were Zhejiang, Guangdong, and Jiangsu, accounting for more than 70% of the total, though the ratio was slightly lower than that in June. Specifically, the imports of Zhejiang, Guangdong, and Jiangsu provinces stood at 43,900 mt, 23,700 mt, 7,000 mt respectively, accounting for 43%, 23%, and 7% respectively. Overall, the domestic imports of unwrought aluminium alloy in July dipped month-on-month but rose year-on-year. At the same time, the exports climbed year-on-year and month-on-month. In terms of imports, most of the aluminium alloy ingots that arrived at ports in July were under the orders placed after April. Considering that new orders have shrunk after April due to sustained import losses, the arrivals in July and August are expected to dwindle. Since mid-July, the aluminium prices, which had been falling for nearly two months, finally rallied, and the domestic prices of ADC12 secondary aluminium alloy also began to rise. The import losses gradually eased and the profits emerged. Meanwhile the import window was also opened since early August for half a month. As of August 23, imported ADC12 secondary aluminium alloy from Malaysia was quoted at $2,400/mt, up from $2,100/mt in July, and the import losses were once again expanded to 300-400 yuan/mt. However, traders are bullish on the market outlook, so the new orders have been rising recently. It is expected that the imported arrivals of aluminium alloy ingots after September will be more than those in July and August.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
5시간 전
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
더 보기
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9월 20일, 허난 이루이 신소재 기술 유한공사의 연간 72만 톤 알루미늄 기반 신소재 스마트 제조 프로젝트의 후판 조압연기가 정식으로 가동되었다. 총 투자액 15억 위안 규모의 이 프로젝트는 기존 공장 부지를 활용하여 국제적으로 앞선 "1+4" 열간 연속 압연 라인을 구축했으며, 푸셔식 재가열로 등 업계 선도적인 알루미늄 가공 설비를 갖추고 있다. 또한 압연력, 온도 등 핵심 생산 파라미터를 실시간으로 모니터링하고 동적으로 조절할 수 있는 산업용 사물인터넷 시스템을 구축하여 고급 알루미늄 제품의 품질 안정성을 효과적으로 보장하고 고부가가치 제품의 시장 점유율을 지속적으로 확대하고 있다.
5시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
5시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
더 보기
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니는 글렌코어와의 협력을 알루미나 정제, 에너지, 금, 비철금속 분야로 확대할 계획이며, 광업 수익 확대, 광물 자원의 현지 가공 및 산업화 촉진, 중국·중동 및 기타 지역 시장 및 국제 광산 기업과의 협력 강화를 목표로 한다.
5시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
5시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
더 보기
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
9월 21일, 디항그룹 산하 딩펑알루미늄제조(캄보디아)유한회사 2단계(A3 프로젝트) 기공식이 거행되었다. 캄보디아 캄퐁참주 6번 도로 특별경제구역에 위치한 딩펑알루미늄은 고급 합금 알루미늄 봉, 고급 알루미늄 프로파일 및 신에너지 자동차 부속 제품의 연구개발과 생산을 주력으로 하며, 용해·주조, 압출, 양극산화, 심가공, 정밀가공, 표면처리를 아우르는 전 공정 생산라인과 설비를 갖추고 있다. 2단계가 완전 가동되면 연간 생산능력은 20만 톤, 연간 생산액은 최대 7억 달러에 달할 전망이다. 2단계(A3 프로젝트)에는 24,340㎡ 규모의 신에너지 자동차 가공공장(단층 철골구조), 15,291㎡ 규모의 압출공장, 그리고 사무동, 경비실, 배전실 등 부대시설이 포함될 예정이다.
5시간 전