SMM Research: Extrusion Sector Drove up the Operating rates of Aluminium Downstream, the Pandemic Supressing Downstream Consumption

게시됨: Apr 15, 2022 15:53
출처: SMM
The average operating rate of major aluminium leading processing enterprises climbed 1.2 percentage points from a week ago to 67.8%.

SHANGHAI, Apr 14 (SMM) - The average operating rate of major aluminium leading processing enterprises climbed 1.2 percentage points from a week ago to 67.8%. In details, the operating rates of extrusion enterprises rose again. The previous suspended production caused by the pandemic gradually recovered, driving up the whole operating rates slightly. But orders were less than expected except for photovoltaic and 3C electronic sectors. As for the primary and secondary aluminium alloy sectors, the operating rates declined under the impact of the pandemic, and transportation in East China, where alloy plants are concentrated, continued to be restricted and freight costs rose wildly, resulting in reduction of output due to the difficulties in deliveries and inadequate raw materials. The operating rates of aluminium sheet/plate and strip, aluminium foil and strip, aluminium foil and aluminium wire and cable sector remained stable this week, but transport and orders were still not ideal under the pandemic. The pandemic will maintain the biggest factor affecting the operating rates of leading aluminium processing enterprises. The market shall focus on the impact of the pandemic on the transport and production of enterprises. If the pandemic ends, downstream consumption will recover soon and the operating rates of enterprises will pick up sharply.

In terms of different products:

Primary aluminium alloy: The average operating rate of large primary aluminium alloy enterprises fell two percentage points to 67% this week, which mainly due to the reduction in production at a branch of an enterprise under the pandemic. The pandemic has still not improved greatly this week, with transport difficulties in East China and rising freight rates. The shipments of alloy plant were still not smooth. Leading alloy enterprises have not yet adjusted operating rates, and changes in the pandemic are still the most important factor affecting the operating rates of the primary aluminium alloy industry in the short term.

Aluminium plate/sheet and strip: The average operating rate of large aluminium plate/sheet and strip enterprises was flat at 78% this week. Transport efficiency was still low in East China this week and a number of small and medium-sized enterprises in Jiangsu, Zhejiang and Shanghai continued to shut down. The reduction in demand led to the declining orders of aluminium sheet/plate and strip enterprises in Henan and Shandong with downward operating rates in the industry. The market shall focus on the latest progress of the pandemic and transport. If the transport restrictions loosen, the operating rates of industry may rebound, while the operating rates of leading enterprise will remain stable in the short term.

Aluminium wire and cable: The operating rates of the leading aluminium wire and cable enterprises stood at 53% this week. The pandemic in Wuxi has eased with improved transport in the region. The enterprises should arrange the shipments of finished goods inventory and replenishment of raw materials as soon as possible. The pandemic has a greater impact on the supply chain operation of industry. In order to reduce the risk of transport disruptions, most companies increased the amount of stocks. But the terminal demand in State Grid and other cable was in a downward movement. With the consumption of orders in hand, the operating rates of companies may decline.

Aluminium extrusion: The operating rates of large aluminium extruders rose by 1.5% to 75.5% on the week. The main reason was that the resumption of production in enterprises that stopped production at the beginning of the pandemic continued to improve compared to last week, driving up the operating rates. In details, most of construction aluminium extruders maintained normal production this week. But the pandemic led to the lockdown of some areas, while transport costs increased largely with rising finished products inventory. Industrial extruders maintained stable production this week, but the increment of orders was less than expected under the pandemic, except for photovoltaic and 3C electronic sectors. In the short term, the operating rates of domestic extrusion has maintained a positive trend, while the situation in real estate industry has been eased. If the pandemic improves, the orders of construction extruders may increase. It is expected that the operating rates of leading aluminium extruders will increase slightly next week. The market shall focus on the impact of the pandemic on some areas.

Aluminium foil: The operating rates of leading aluminium foil enterprises stood at 80.7% this week, and there was no significant improvement in the transport in Jiangsu and other places this week. Local small and medium-sized aluminium foil enterprises have seen a significant drop in output and sales, while the operating rates of local leading enterprises remained unchanged. By products, orders of food packaging foil were sufficient supporting by the rigid demand of terminal. Although products like air-conditioning foil, brazing foil and other products have entered the peak season, the orders were less than expected by the impact of the pandemic. At present, the market is generally optimistic about future consumption, and believes that consumption is bound to recover after the end of the pandemic. The operating rates of the aluminium foil industry will pick up significantly.

Secondary aluminium alloy: The average operating rate of large secondary aluminium alloy enterprises dropped by 3.1 percentage points to 47.2% this week, which mainly due to the reduction of production in alloy plants in Jiangsu caused by the pandemic and the limitations of imported aluminium scrap in Guangdong. Prices of aluminium fluctuated largely this week. While the prices of secondary aluminium alloy lacked of upward momentum due to the weak demand. With thin profits of corporates and transport restrictions of raw materials and finished products in alloy plants, many manufacturers reduced output. In addition, the recent arrivals of imported aluminium scrap were not smooth in Guangdong and the local alloy plants were forced to reduce production due to the shortage of raw materials. If the demand continues to be weak and the pandemic to suppress transport efficiency, the operating rates of secondary aluminium are expected to decline in the short term.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ADC12 시장, 수요 약세와 높은 원자재 비용 속에서도 오퍼 가격 안정적
44분 전
ADC12 시장, 수요 약세와 높은 원자재 비용 속에서도 오퍼 가격 안정적
더 보기
ADC12 시장, 수요 약세와 높은 원자재 비용 속에서도 오퍼 가격 안정적
ADC12 시장, 수요 약세와 높은 원자재 비용 속에서도 오퍼 가격 안정적
[SMM 알루미늄 합금 일일 리뷰] ADC12 시장 오퍼는 오늘 대체로 안정적이었습니다. 현재 최종 수요는 여전히 약세를 보이며, 다운스트림 구매는 실수요 위주로 이루어져 전체 거래 개선은 제한적입니다. 한편, 알루미늄 스크랩 등 원자재 비용이 비교적 높은 수준을 유지하며 ADC12 가격을 일부 지지하고 있습니다. 수급 양측에 큰 변화가 없는 가운데, 단기
44분 전
수급 변화 없이 ADC12 가격 횡보 [ADC12 가격 일일 리뷰]
1시간 전
수급 변화 없이 ADC12 가격 횡보 [ADC12 가격 일일 리뷰]
더 보기
수급 변화 없이 ADC12 가격 횡보 [ADC12 가격 일일 리뷰]
수급 변화 없이 ADC12 가격 횡보 [ADC12 가격 일일 리뷰]
[ADC12 가격 일일 리뷰: 수급 정체로 ADC12 가격 횡보] 오늘 ADC12 시장 전반의 오퍼 가격은 안정적이었다. SMM ADC12 가격은 전 거래일 대비 23,950위안/톤으로 변동이 없었다.
1시간 전
EGA, 알 타윌라 제련소 셀 25% 복구… 2027년 1분기까지 알루미늄 완전 생산 목표
3시간 전
EGA, 알 타윌라 제련소 셀 25% 복구… 2027년 1분기까지 알루미늄 완전 생산 목표
더 보기
EGA, 알 타윌라 제련소 셀 25% 복구… 2027년 1분기까지 알루미늄 완전 생산 목표
EGA, 알 타윌라 제련소 셀 25% 복구… 2027년 1분기까지 알루미늄 완전 생산 목표
[SMM 알루미늄 속보] 에미레이트 글로벌 알루미늄(EGA)은 알타윌라 제련소의 전해조 1,262기 중 315기를 재가동하여 8월 26일 기준 복구율 25%를 달성했다. 이곳은 3월 28일 아부다비 칼리파 경제특구 공격 이후 긴급 가동 중단에 들어갔었다. EGA는 현재 3개 팟라인 모두를 병행 복구 중이며, 1호 팟라인은 5월 26일, 3호 팟라인은 7월 13일, 2호 팟라인은 8월 3일에 각각 가동을 시작했다. 재가동된 전해조는 안정화되어 정상 생산에 도달하는 데 보통 1주일가량 소요된다. EGA는 2027년 1분기까지 알타윌라의 1차 알루미늄 생산이 완전 가동될 것으로 예상하며, 현재 약 1,000명이 복구 작업에 투입되고 있다. 복구 속도는 7월 2일 기준 89기에서 8월 10일 227기(18%), 현재 315기(25%)로 가속화되었다. 회수된 용융 금속 일부는 추가 전해조 재가동에 사용되고, 나머지는 완제품 알루미늄 생산을 위해 알타윌라 주조 공장으로 보내진다. 한편, 알타윌라 알루미나 정제 공장은 여전히 생산 능력의 약 50% 수준이며, EGA는 추가 생산 확대가 공급망 상황과 알루미나 조달 전략 최적화에 달려 있다고 밝혔다. 중요한 점은 EGA가 제련소 복구가 알루미나 정제 공장의 완전 가동에 의존하지 않는다고 밝혔다는 것으로, 이는 외부 알루미나 조달을 통해 알루미늄 재가동을 지원할 수 있음을 의미한다. 알타윌라 재활용 공장도 생산을 확대 중이며, 2026년 4분기 말까지 완전 가동을 목표로 하고 있다.
3시간 전