4680 Battery delivery boosts Nickel Lithium economy crisis in Ukraine and Russia deepens concerns about overseas Aluminum supply [Agency Review]

게시됨: Jan 30, 2022 08:34

The supply of rare earth quotas is expected to increase, and the profits of smelting and separation enterprises may benefit from the increase in volume and price: according to SMM, the Ministry of Industry and Information Technology promptly organized a "Symposium on promoting the Development of rare Earth Application Industry". Chang Guowu, deputy director of the raw material industry department of the Ministry of Industry and Information Technology, said that the Ministry of Industry and Information Technology is very concerned about the sharp rise in rare earth prices and its impact on upstream and downstream industries, and will respect and collect the opinions and suggestions of associations and parties, consult and coordinate with relevant state ministries and commissions as soon as possible, take appropriate measures to regulate and control, increase quota supply according to market demand, and comprehensively promote and promote the coordinated, healthy and sustainable development of the rare earth permanent magnet industry chain. Recently, the price of SMM praseodymium and neodymium oxide shows an accelerated upward trend. There is still a gap between supply and demand of rare earths in 2022, and the increment at the supply end is relatively rigid. In addition to quotas, American and Burmese ores in imported mines are relatively stable, while waste recovery ores are limited by environmental protection inspection and other factors, so it is difficult to release The demand side benefits from the pull of terminal industries such as new energy vehicles, permanent magnet motors and home appliances and wind power, and the shortage pattern of supply and demand is expected to be maintained. The orderly release of rare earth quotas may alleviate the tension between supply and demand to a certain extent, the smelting separation enterprises that obtain the quota increment benefit from the high price and volume increase, and the profit level is expected to be further expanded. Looking back in history, China's rare earth mining index in 2021 increased by 28000 tons (discounted rare earth oxides) over 2020, all of which were light rare earth mining targets; in 2020, China's rare earth mining targets increased by 8000 tons compared with 2019, all of which were also light rare earth mining targets. According to the target, the North rare Earth Group will increase by 26800 tons and the South rare Earth Group by 1200 tons in 2021.

The crisis in Ukraine and Russia has deepened concerns about overseas electrolytic aluminum supply: recently, relations between Ukraine and Russia have deteriorated, the two sides have deployed a large number of military personnel and equipment in the border areas, and Sina News reported that the United States does not agree with Russia's demands. negotiations are further tense. According to the annual report released by BP, Russia has the largest proven natural gas reserves in the world in 2021. Russian pipeline gas supply accounts for about 35% of Europe's total natural gas imports in 2021, and it is an important energy supplier in Europe. The crisis between Ukraine and Russia has deepened, and market concerns about the energy pressure of European smelters have further deepened. In addition, the market is also worried about the supply of electrolytic aluminum in Russia. In 2021, China imported 1.58 million tons of electrolytic aluminum, accounting for 18.4% of Russia's imports. Referring to the sanctions announced by the United States on Rusal in April 2008, Rusal was not allowed to be included in the list of LME delivery brands, resulting in extremely tight inventories, and LME aluminum surged to 2550 US dollars / ton. Overseas electrolytic aluminum prices may remain high due to supply disturbances for a period of time, while domestic electrolytic aluminum plants are expected to maintain a good profit level. In addition to electrolytic aluminum, there is also concern about whether tensions between Ukraine and Russia will have an impact on the fundamentals of nickel and cobalt. According to Argus Metals, traders are closely watching whether the incident will affect Nornicke (l, Russia's largest nickel and cobalt producer. Nornickel produces 1800-2100 tonnes of cobalt metal a year, although most of it comes from its factories in Finland, but Western banks may be reluctant to finance companies that produce or process sanctioned materials.

The first batch of Model Y with 4680 batteries will be delivered at the end of the first quarter, and the nickel-lithium sector may be boosted: (1) according to the Financial Associated Press, Tesla said that 4680 batteries will be loaded in Texas superfactories and will be ready for delivery after completing certification in the first quarter of 2022. 4680 volume or good power ternary development, continue to be optimistic about ternary materials, especially high nickel ternary demand: 1) 4680 the main advantages are reflected in the battery capacity, production cost, and production efficiency, according to the SMM,4680 battery compared with the 21700 battery capacity increased by almost 5 times, on the one hand, the improvement of battery capacity improved mileage; on the other hand, it will also reduce the number of PACK cells, cost savings. 2) according to SMM,2021, the output of high-nickel ternary materials in China is 147900 tons, and the permeability (accounting for the total case of three elements) reaches 35.1%, of which the output in December is 18900 tons, and the permeability is more than 40%. On the one hand, under the long-life performance, Mercedes-Benz EQA, BMW IX, Ford MustangMach-E, Volkswagen ID.6X and other high-nickel models have brought about an increase in high nickel demand; on the other hand, the main advantage of 4680 batteries lies in the improvement of energy density, and the improvement of battery technology is also expected to open incremental space for high-nickel growth. (2) the demand-side high nickel ternary drive the release of lithium hydroxide production capacity at the supply end, or limited by the shortage of spodumene resources, continue to be optimistic about the companies with high resource ownership rate and good lithium hydroxide release logic.

Risk tips: demand is lower than expected, supply release is higher than expected, etc.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
한때 외면했지만, 이제는 주문 확보에 사활! 한국 3대 기업, LFP로 집단 전환!
41분 전
한때 외면했지만, 이제는 주문 확보에 사활! 한국 3대 기업, LFP로 집단 전환!
더 보기
한때 외면했지만, 이제는 주문 확보에 사활! 한국 3대 기업, LFP로 집단 전환!
한때 외면했지만, 이제는 주문 확보에 사활! 한국 3대 기업, LFP로 집단 전환!
2026년 8월 마지막 날, SK온은 미국 에너지저장장치(ESS) 기업 네오볼타파워와 LFP 파우치형 배터리 셀 5년 공급 계약을 체결했다고 발표했다. 총 공급량은 9GWh이며, 연내 9GWh 규모의 추가 주문이 더해질 경우 양사 협력 규모는 총 18GWh로 확대될 전망이다. 거의 동시에 삼성SDI는 ESS 통합업체와 3년간 LFP 배터리 셀 공급 계약 체결을 앞둔 것으로 알려졌다. 계약 규모는 수조 원대이며 연간 공급량은 수 GWh 수준이다.
41분 전
[SMM 에너지저장 배터리 셀 시장 주간 리뷰 9.3] 동박 공급 부족으로 9월 생산 일정 제약, 에너지저장 배터리 셀 가격 견조 유지
13시간 전
[SMM 에너지저장 배터리 셀 시장 주간 리뷰 9.3] 동박 공급 부족으로 9월 생산 일정 제약, 에너지저장 배터리 셀 가격 견조 유지
더 보기
[SMM 에너지저장 배터리 셀 시장 주간 리뷰 9.3] 동박 공급 부족으로 9월 생산 일정 제약, 에너지저장 배터리 셀 가격 견조 유지
[SMM 에너지저장 배터리 셀 시장 주간 리뷰 9.3] 동박 공급 부족으로 9월 생산 일정 제약, 에너지저장 배터리 셀 가격 견조 유지
[SMM 분석] 동박 공급 부족과 대용량 배터리 셀의 예상보다 느린 생산능력 확대로 인해, 9월 중국 및 글로벌 에너지저장 배터리 셀 생산 증가율은 전월 대비 각각 4.09%와 4.25%로 둔화될 전망이다. 그러나 이는 최종 수요 약화를 의미하지는 않는다. 에너지저장 배터리 셀의 수급 상황은 여전히 타이트하며, 314Ah 배터리 셀 가격은 안정세를 유지하고 있다. 향후 출하량은 꾸준히 증가할 것으로 예상되며, 가격은 안정적 내지 상승 추세를 이어갈 전망이다.
13시간 전
CATL 회장: 중국 상반기 신에너지차 판매 740만 대 돌파, 배터리 생산 정밀성 강조
14시간 전
CATL 회장: 중국 상반기 신에너지차 판매 740만 대 돌파, 배터리 생산 정밀성 강조
더 보기
CATL 회장: 중국 상반기 신에너지차 판매 740만 대 돌파, 배터리 생산 정밀성 강조
CATL 회장: 중국 상반기 신에너지차 판매 740만 대 돌파, 배터리 생산 정밀성 강조
CATL 쩡위췬 회장은 2026 세계 동력 배터리 컨퍼런스 영상 축사에서 올해 상반기 중국 신에너지차 판매가 740만 대를 넘어섰고, 신차 출시가 600종 이상으로 하루 평균 3대에 육박한다고 밝혔다. 모두가 속도, 사양, 가격으로 경쟁하며 개발 주기는 점점 짧아지고 있다. 그는 동력 배터리는 극도로 높은 정밀도가 요구되고 오차 허용 범위가 매우 낮다고 지적했다. 양산 과정에서는 모든 작은 문제가 여러 배로 확대되므로 설계 단계부터 모든 공정과 모든 파라미터를 엄격히 통제하고, 이상 징후를 사전에 식별하며, 품질 문제에 대해 무관용 원칙을 적용해야 한다고 강조했다.
14시간 전