The scarcity of this kind of assets is highlighted in the neck link of expanding the production of important materials for lithium batteries.

게시됨: Oct 26, 2021 09:39
[the scarcity of such assets in the expansion of important materials for lithium batteries] the demand for anode materials began to rise sharply in the fourth quarter of 2020. Under the high pressure of national energy consumption control, the graphitization of domestic anode materials has been in a tense state since this year. Prices have continued to rise from a 20-year low of 12500 yuan / ton, and the current maximum increase has doubled.

The demand for anode materials began to rise sharply in the fourth quarter of 2020. under the high pressure of national energy consumption control, the graphitization of domestic anode materials has been in a tense state since this year, and the price has continued to rise from a 20-year low of 12500 yuan / ton. the highest rate of increase has doubled.

Graphitization is one of the necessary processes of artificial graphite, accounting for more than 40% of the cost of the negative electrode, and it is one of the important links for negative enterprises to reduce costs. At present, the domestic graphitization capacity exceeds 800000 tons, and 40% of the graphitization capacity is distributed in Inner Mongolia. Due to the high energy consumption of graphitized production capacity, the operating rate of graphitized stock capacity in some areas is restricted, the landing of new capacity becomes more difficult, and the scarcity of graphitized assets is highlighted, which has become a bottleneck link of negative production expansion. In the first half of 2001, factors such as double control of energy consumption and environmental protection in Inner Mongolia were superimposed, and the production capacity of the main negative graphitization producing areas was only about 85% at most.

According to the theme database of the Financial Associated Press, among the relevant listed companies:

Cunninghamia lanceolata shares negative graphitization production capacity of 42000 tons / year.

Xiangfenghua has a production capacity of 30, 000 tons of anode materials, a fund-raising project is under construction of 30, 000 tons, and an integrated production base of mid-and high-end man-made graphite anode materials is planned for 60, 000 tons, totaling 120000 tons.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[전고체 배터리 루머 반박: 중국자동차기술연구센터(CATARC) 왕팡, 전고체 배터리 기업에 대한 적합성 판정 없었다고 밝혀]
31분 전
[전고체 배터리 루머 반박: 중국자동차기술연구센터(CATARC) 왕팡, 전고체 배터리 기업에 대한 적합성 판정 없었다고 밝혀]
더 보기
[전고체 배터리 루머 반박: 중국자동차기술연구센터(CATARC) 왕팡, 전고체 배터리 기업에 대한 적합성 판정 없었다고 밝혀]
[전고체 배터리 루머 반박: 중국자동차기술연구센터(CATARC) 왕팡, 전고체 배터리 기업에 대한 적합성 판정 없었다고 밝혀]
[전고체 배터리 루머 반박: 중국자동차기술연구센터(CATARC) 왕팡, 전고체 배터리 기업 적합성 판정 실시한 바 없다고 밝혀] 2026년 9월 4일, 중국자동차기술연구센터(CATARC) 수석과학자 왕팡은 '2026 세계 동력 배터리 컨퍼런스'에서 최근 루머에 대해 해명했다. CATARC는 전고체 배터리 기업에 대해 어떠한 판정도 실시한 바 없으며, 관련 루머는 "허위 정보"라고 밝혔다. 최근 시장에서는 CATARC가 올해 7월부터 시행된 국가표준 GB/T 43568-2026 '전기자동차용 전고체 배터리 – 제1부: 용어 및 분류'에 근거하여 전고체 배터리 관련 320여 개 기업을 대상으로 판정을 실시했으며, 최종적으로 모든 적합성 항목을 완전히 통과한 기업은 9곳에 불과하다는 보도가 나온 바 있다.
31분 전
[리튬 배터리: 포산 플라스틱, 고급 분리막 생산능력에 70억 위안 이상 투자 계획]
31분 전
[리튬 배터리: 포산 플라스틱, 고급 분리막 생산능력에 70억 위안 이상 투자 계획]
더 보기
[리튬 배터리: 포산 플라스틱, 고급 분리막 생산능력에 70억 위안 이상 투자 계획]
[리튬 배터리: 포산 플라스틱, 고급 분리막 생산능력에 70억 위안 이상 투자 계획]
포산 플라스틱 테크놀로지(Foshan Plastics Technology)는 9월 3일, 전액 출자 자회사인 거러커(허베이 진리)가 광둥성 사오관에 연 40억㎡ 규모의 습식 분리막 생산기지에 약 33억 5천만 위안을, 허베이성 우안에 연 40억㎡ 규모의 코팅 분리막 프로젝트에 약 38억 1천만 위안을 투자할 것이라고 공시했다. 또한 최대 40억 위안 규모의 사모발행을 계획하고 있으며, 지배주주인 광신그룹이 4억~10억 위안을 청약하여 분리막 공급 규모와 원가 경쟁력 제고를 목표로 한다.
31분 전
[전고체: ProLogium, 381Wh/kg 3.5세대 전고체 셀 양산 시작]
31분 전
[전고체: ProLogium, 381Wh/kg 3.5세대 전고체 셀 양산 시작]
더 보기
[전고체: ProLogium, 381Wh/kg 3.5세대 전고체 셀 양산 시작]
[전고체: ProLogium, 381Wh/kg 3.5세대 전고체 셀 양산 시작]
ProLogium은 9월 2일 자사 3세대 Gen 3.5 리튬 세라믹 배터리가 중국 타이완에 위치한 기가와트급 공장에서 양산에 돌입했다고 발표했다. 이로써 고에너지밀도 전고체 기술이 파일럿 단계에서 대량 생산 단계로 전환됐다. TÜV 시험 결과 185.4Ah 대형 셀은 381Wh/kg 및 903Wh/L에 도달했으며, 중국 표준 GB/T 43568-2026에 따른 UL Solutions 시험에서 전고체 분류가 확인됐다. ProLogium은 2013년 이후 240만 개 이상의 셀을 출하했고 자동차 분야에서 175건 이상의 반복 주문을 확보했다. 차세대 Gen 4 배터리는 기존 생산 라인의 약 10%만 개조하면 되며, AI 데이터센터, 전기차, 해양 및 항공우주 분야를 목표로 한다.
31분 전