The new standard of imported scrap aluminum to be launched in November

게시됨: Oct 20, 2020 11:28
The Announcement on Regulating the Import Management of Secondary Brass Raw Materials, Secondary Copper Raw Materials and Secondary Casting Aluminum Alloy Raw Materials announced that, in terms of scrap aluminum, simply speaking, raw materials that meet the requirements of Recycled Casting Aluminum Alloy Raw Materials (GB/T 38472-2019) are not solid wastes and can be imported freely, with the tariff code of 7602000020.

SHANGHAI, Oct 20 (SMM) — According to The Announcement on Regulating the Import Management of Secondary Brass Raw Materials, Secondary Copper Raw Materials and Secondary Casting Aluminum Alloy Raw Materials, aluminium raw materials that meet the requirements of Recycled Casting Aluminum Alloy Raw Materials (GB/T 38472-2019) are not solid wastes and can be imported freely, with the tariff code of 7602000020.

 

Therefore, in principle, the import of scrap aluminum has been liberalized, and what is needed is not the direction but the influence of quantity, so it is necessary to pay attention to the new tariff code and the specific implementation of the previous Secondary Aluminum Alloy Raw Materials (GB/T 38472-2019).

 

In terms of prices, the current domestic price increase of ADC12 aluminum alloy ingot will slow down, and the prices will remain stable in the near term. After import window of scrap aluminum opens in November, the price may drop to some extent. The main reason for its decline is that there were more than 100,000 mt of scrap aluminum piling up overseas. Once a large amount of scrap aluminum is released into China, the relevant carriers may sell a large amount of scrap aluminum and aluminum alloy ingots to grab orders, leading to a significant decrease in the market prices.

 

Regarding the raw materials of Secondary Casting Aluminum Alloy Raw Materials (GB/T 38472-2019), the restrictions on the imported raw materials mainly lie in two aspects. One is the change of definition, with the inclusion of secondary aluminum ingots. In addition, specific requirements to be focused on include aluminum and aluminum alloy content, metal amount and metal recovery rate, as well as chemical composition. As for other requirements they are relatively easy to be met. The two requirements correspond to the two main factors of the pricing standard of domestic waste aluminum market, namely water yield and composition.

 

The launch of the new standard means the liberalization of the import of scrap aluminum, which is a directional change, that is, it is expected that the quantity of scrap aluminum imported in Q4 will no longer decrease compared to the same period. It will lead to the narrowing of the price gap between scrap aluminum in the domestic and overseas markets, which will reduce the cost of domestic secondary aluminum in the future, and reduce the competitiveness of imported aluminum alloy ingots on the other hand.

 

However, it is worth noting whether the new tariff No.760200020 includes secondary aluminum ingots and whether the requirements are as mentioned in the standard. In addition, related tariff issues will directly affect the import efficiency and quantity of scrap aluminum. In addition, whether traders can import directly will also determine the speed of imported scrap aluminum flowing into China.

 

The impact of the possible liberalization of imported scrap aluminum on aluminum prices mainly lies in the previous market's expectation that supply of secondary aluminum will be insufficient in Q4 and beyond, and that primary aluminum will be replaced. This expectation may be deviated due to the liberalization of imported scrap aluminum, which depends on the import volume. The actual consumption of primary aluminum and the impact of the implementation rules of imported scrap aluminum on the import volume will be monitored by SMM aluminium research team.

 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
알루미늄 빌렛 가공료, 생산원가선까지 후퇴, 버틸 수 있을까?
14시간 전
알루미늄 빌렛 가공료, 생산원가선까지 후퇴, 버틸 수 있을까?
더 보기
알루미늄 빌렛 가공료, 생산원가선까지 후퇴, 버틸 수 있을까?
알루미늄 빌렛 가공료, 생산원가선까지 후퇴, 버틸 수 있을까?
7월 말, 중국 알루미늄 빌렛 가공비는 6월 고점에서 지속적으로 하락하며, 일부 주요 소비 지역의 φ120 알루미늄 빌렛 가공비가 생산 원가선에 근접했습니다. 비수기 한계 수요 약화, 중국 남부 지역 입고량 증가, 알루미늄 가격 중심이 비교적 안정적인 가운데, 가공비가 원가선 부근에서 지지될 수 있을지가 시장의 핵심 관심사로 떠올랐습니다....
14시간 전
중국 알루미늄 빌렛 가공비가 생산 원가 수준 가까이 하락, 유지될까? [SMM 분석]
16시간 전
중국 알루미늄 빌렛 가공비가 생산 원가 수준 가까이 하락, 유지될까? [SMM 분석]
더 보기
중국 알루미늄 빌렛 가공비가 생산 원가 수준 가까이 하락, 유지될까? [SMM 분석]
중국 알루미늄 빌렛 가공비가 생산 원가 수준 가까이 하락, 유지될까? [SMM 분석]
[SMM 분석: 알루미늄 빌렛 가공비, 생산 원가선 근처로 하락 – 가격 방어 가능할까?] 7월 말에 접어들면서 중국의 알루미늄 빌렛 가공비는 6월 고점에서 계속 하락하여, 일부 주요 소비 지역의 φ120 알루미늄 빌렛 가공비가 생산 원가선에 근접하고 있다. 시장은 가격을 유지하면서 출하해야 하는 이중 압박을 느끼고 있다. SMM의 최신 데이터에 따르면, 7월 23일 기준 중국 주요 소비 지역의 알루미늄 빌렛 사회적 재고는 12만 1천 톤으로 증가하여 2주 연속 재고 증가세를 기록했다. 같은 기간 창고 출하량은 3만 3천 톤으로 감소하여 전 주 대비 뚜렷한 하락을 보였다. 비수기 수요 약화, 중국 남부로의 입하 증가, 그리고 비교적 안정된 알루미늄 가격 중심 속에서 가공비가 원가선 부근에서 안정될 수 있을지가 시장이 주목하는 핵심 문제가 되었다.
16시간 전
중국 15야금건설의 베트남 프로젝트가 첫 알루미늄 잉곳을 성공적으로 생산했습니다.
17시간 전
중국 15야금건설의 베트남 프로젝트가 첫 알루미늄 잉곳을 성공적으로 생산했습니다.
더 보기
중국 15야금건설의 베트남 프로젝트가 첫 알루미늄 잉곳을 성공적으로 생산했습니다.
중국 15야금건설의 베트남 프로젝트가 첫 알루미늄 잉곳을 성공적으로 생산했습니다.
7월 21일, 중국15야금건설유한공사 제3공사 베트남 알루미늄 프로젝트부의 일반 알루미늄 잉곳 주조 작업장이 첫 알루미늄 잉곳을 성공적으로 생산했다. 이번 알루미늄 출탕은 주조 시스템 시험 생산의 단계적 성과를 의미한다.
17시간 전
The new standard of imported scrap aluminum to be launched in November - Shanghai Metals Market (SMM)