[SMM Daily Review] most non-ferrous floating green Shanghai zinc only floating red crude oil in the last period is difficult to stop falling and stabilizing by more than 2%.

게시됨: Sep 11, 2020 16:27

SMM9 March 11: most of the non-ferrous metals are green today. By the end of the day, Shanghai Tin fell 1.48%, Shanghai lead fell 0.99%, Shanghai Aluminum fell 0.94%, Shanghai Copper fell 0.73%, Shanghai Nickel fell 0.33%, and Shanghai Zinc only rose 0.73%. In terms of nickel, macro factors triggered market panic, affecting not only safe-haven assets such as gold and silver, but also basic metals. From a fundamental point of view, the peak of stainless steel prices and increased profit pressure are the factors restricting the upward rise of nickel prices, but they are not the decisive factors in the near future. spot nickel prices are strong, and nickel pig iron has little room to fall. There is still a gap between the supply and demand of primary nickel in the third quarter, so the decline in nickel prices may not be a long-term trend. at present, macro sentiment and bears have the upper hand, making it difficult for nickel prices to rebound quickly. It is expected that the near-term nickel price in the current position near the shock consolidation is mainly, or can look forward to later repair.

In terms of lead, Shanghai lead low closing Changyang line, k line center of gravity further moved down, but the KDJ index showed an upward convergence trend, coupled with the fundamentals downstream trading activity is significantly higher than the previous, Shanghai lead is unlikely to continue downward, night attention to whether the bulls can completely stand on the first line of 15000 yuan / ton.

[brief Review of lead in SMM period] the low level of lead in Shanghai rebounded and paid attention to the Wanwu pass at night.

In terms of black system, thread rose 0.14%, hot coil rose 0.64%, stainless steel fell 0.39%, coke fell 0.1%, coking coal rose 0.2%, iron ore rose 0.84%, news surface. Hebei Province Development and Reform Commission issued the "Hebei Iron and Steel Industry chain Cluster Development three-year Action Plan (2020-2022)", the key tasks of the Action Plan: comprehensive use of market mechanisms, economic means, and the rule of law. By 2020, the output of crude steel will be reduced by 14 million tons, and the iron and steel production capacity of the whole province will be limited to less than 200 million tons by the end of the year.

The previous period of crude oil fell 2.26% Jing SC crude oil was still unable to stop falling and stabilized, and it accelerated down more than 2% in late trading, recording five consecutive declines in the market. Yesterday's EIA data show that US Oil has not completely shaken off the effects of the hurricane and crude oil production has begun to recover, but the affected refineries have not fully recovered. According to the news, the market monitoring group of the Organization of Petroleum Exporting countries ((OPEC)) and OPEC+, which is made up of allies including Russia, will meet on September 17th.

In terms of precious metals, Shanghai gold fell 0.23%, Shanghai silver fell 0.99%, and international spot gold prices continued to be under pressure. However, a bill proposed by the US Republican Party has been blocked in the Senate, raising investor doubts about the outlook for the US economy, raising the price of gold on a weekly basis, up 0.45 per cent so far this week.

As of today's day close:

Today's capital flow

In terms of capital flow, 549 million yuan fled from the precious metal plate, and 2.305 billion funds flowed into Mandarin commodities. Among them, the feed plate and oil chain attracted more than 1.5 billion funds to run into the market, and soybean meal monopolized 1.036 billion yuan. Iron and steel sector recovered yesterday's decline, with 521 million financial support, with iron ore contributing 428 million. Corn chain and crude oil plate precipitation funds are more than 300 million yuan month-on-month, but coal and non-ferrous plate outflow of more than 300 million yuan, Shanghai copper loss of 367 million yuan. In addition, IF and IH weighted outflows of 832 million and 777 million respectively.

"Click to sign up: 2020 Tin Industry chain Trading Summit

Scan the code to participate in the meeting or apply to join the SMM tin industry exchange group

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
2026년 9월 12일 16:51
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
더 보기
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
9월 12일 오전 9시 58분, 잉커우 젠파 성하이 비철금속화공 유한공사의 다금속 회수 프로젝트 화야 시스템 핵심 용해로가 성공적으로 점화되어 정식으로 용해로 건조 단계에 진입했으며, 이는 전체 라인 가동 및 생산을 향한 핵심 단계를 의미한다. 공개 정보에 따르면, 잉커우 젠파 성하이 다금속 복합 금은광 종합 회수 기술 업그레이드 이전 및 확장 프로젝트는 동정광을 주요 원료로 사용하며, 전체 계획 생산능력은 연간 음극동 60만 톤이다. 2단계로 건설되며, 각 단계 생산능력은 연간 30만 톤이다. 1단계는 연간 음극동 30만 톤, 연간 황산 118만 톤을 생산하도록 설계되었으며, 제련, 전로, 양극 정련, 전해, 슬래그 선광 및 귀금속 회수 시스템을 갖추고 있다. 점화 후, 프로젝트는 전체 시스템에 걸쳐 표준화된 용해로 건조 및 열간 통합 시운전을 수행하여 설비, 계측, 인터록 및 자동 제어 시스템을 검증할 예정이다. 프로젝트는 아직 공식적으로 원료 투입 및 생산을 시작하지 않았다. 용해로 건조 및 시스템 시운전이 완료되면, 1단계 연간 음극동 30만 톤 생산능력의 가동을 추진할 것이다. 프로젝트가 성공적으로 시운전되면, 중국 동북 지역의 동 제련 능력을 증가시키고 중국의 동정광 원료 수요를 더욱 확대할 것이다.
2026년 9월 12일 16:51
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
2026년 9월 11일 17:43
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
더 보기
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
2026년 9월 11일 17:43
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
2026년 9월 11일 16:30
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
더 보기
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
[SMM Flash] Amigo Resources는 탄자니아 선별 시료에 대한 독립 실험실 결과를 발표했으며, 복합 PGM 함량이 6.94~7.07ppm, 잔류 금 함량이 3.27~3.47ppm으로 나타났다고 밝혔다. 회사는 중력 선광 테일링 및 기타 잔류 물질로부터 회수율을 높이기 위해 자체 PGM 정광 기술을 처리 공정에 통합하는 방안을 검토 중이라고 전했다. Amigo는 또한 건식 제련 구리 매트 처리 경로를 평가하고 있으며, 추가 시험을 위해 소형 용광로를 투입했다. 이번 프로그램은 후속 제련 연구에서 경제적 회수 가능성이 입증될 경우, 탄자니아 복합 금속 광물에서 PGM을 회수 가능한 부산물로 확립할 수 있을 것으로 기대된다. 다만 보고된 품위는 선별된 시험 물질 및 처리 연구에 국한된 것으로, 적격 광물자원량, 매장량 또는 상업적 규모의 PGM 생산 증거로 간주될 수 없다. 따라서 보고된 PGM 함량이 경제적으로 회수 가능한 제품 흐름으로 이어질 수 있는지 판단하기 위해서는 추가적인 제련 시험이 중요할 전망이다.
2026년 9월 11일 16:30