Macro Roundup (Sep 2)

게시됨: Sep 2, 2020 09:03
The economic activity in the US' manufacturing sector expanded at a stronger pace in August than it did in July with the ISM's Manufacturing Purchasing Managers' Index (PMI) climbing from 54.2 in July to 56. This reading marked the highest print since January 2019 and came in better than the market expectation of 54.5.

SHANGHAI, Sep 2 (SMM) — This is a roundup of global macroeconomic news last night and what is expected today.

 

The economic activity in the US' manufacturing sector expanded at a stronger pace in August than it did in July with the ISM's Manufacturing Purchasing Managers' Index (PMI) climbing from 54.2 in July to 56. This reading marked the highest print since January 2019 and came in better than the market expectation of 54.5.

 

The US dollar was at it lowest in more than two years against a basket of currencies, pressured by the US Federal Reserve’s loosening of inflation policy last week.

 

Gold prices edged up on Tuesday as a weaker dollar countered some pressure from the better-than-expected US manufacturing data, which pulled the metal down from a two-week high.

The US dollar was holding close to a more than two-year low, making gold cheaper for holders of other currencies. US manufacturing activity accelerated to a more than 1-1/2-year high in August, the Institute for Supply Management (ISM) data showed.

 

Oil prices rose on Tuesday, reversing overnight losses as better-than-expected US manufacturing activity data spurred hope for a post-pandemic economic recovery, and as analysts forecast a sixth weekly drawdown in US crude inventories. In addition, a weak dollar was also supportive for oil as dollar-priced commodities become cheaper for global buyers.

 

On Wall Street, the Dow Jones Industrial Average gained 215.61 points, or 0.8%, to close at 28,645.66. The S&P 500 climbed 0.8% to 3,526.65 and the Nasdaq Composite advanced 1.4% to 11,939.67. Both the S&P 500 and Nasdaq hit all-time highs.

 

On the SHFE, nonferrous metals, except for copper and aluminium, closed higher in overnight trading. Zinc added 0.77%, lead advanced 0.41%, nickel firmed 0.2 and tin rose 0.56%, while copper fell 0.65% and aluminium declined 0.93%.

Their counterparts on the LME rose across the board on Tuesday. Tin jumped 2.11% to lead the way up, zinc increased 1.47%, aluminium firmed 1.14%, nickel strengthened 1.44%, copper added 0.13% and lead edged up 0.05%.

 

In Europe, inflation data for the eurozone came in well below expectations, raising speculation that the European Central Bank will have to act sooner rather than later. Annual headline inflation is expected to come in at -0.2% in August, down from 0.4% in July. Separate figures for the region also zone revealed that the unemployment rate rose once again, to 7.9% for the month of July.

Activity in the eurozone manufacturing sector continued to recover in August from the impact of the Covid-19 pandemic and shutdowns.

IHS Markit’s final manufacturing purchasing managers’ index printed at 51.7, in line with the flash estimate and a touch below July’s reading of 51.8. There were "marked" gains in output and new orders and confidence was at its highest for more than two years, but job losses continued at a strong pace.

 

Key economic data slated for release today include German retail sales for July, US durable goods orders and factory orders for July, automatic data processing (ADP) employment for August and inventory data from the US Energy Information Administration (EIA).

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
2026년 9월 12일 16:51
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
더 보기
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
9월 12일 9시 58분, 잉커우 젠파 성하이 비철금속화공 유한공사 다금속 회수 프로젝트의 화염제련 시스템 핵심 용해로가 성공적으로 점화되어 정식으로 용해로 건조 단계에 진입했으며, 이는 전체 라인 시운전 및 생산을 향한 핵심 단계를 의미한다. 공개 정보에 따르면, 잉커우 젠파 성하이 다금속 복합 금은광 종합 회수 기술 업그레이드 이전 및 확장 프로젝트는 동정광을 주요 원료로 사용하며, 전체 계획 생산능력은 연간 음극동 60만 톤으로 2단계에 걸쳐 건설되며, 단계별 생산능력은 연간 30만 톤이다. 1단계는 연간 음극동 30만 톤, 연간 황산 118만 톤을 생산하도록 설계되었으며, 제련, 전로, 양극 정련, 전해, 슬래그 선광, 귀금속 회수 등의 지원 시스템을 갖추고 있다. 이번 점화 이후, 프로젝트는 전체 시스템에 걸쳐 표준화된 용해로 건조 및 열간 통합 시운전을 수행하여 설비, 계기, 인터록 및 자동 제어 시스템을 검증할 예정이다. 프로젝트는 아직 정식으로 원료 투입 및 생산을 시작하지 않았으며, 용해로 건조 및 시스템 시운전이 완료된 후 1단계 연간 음극동 30만 톤 생산능력의 시운전을 추가로 추진할 것이다. 프로젝트가 성공적으로 가동되면 화북 지역의 동 제련 능력이 증가하고 국내 동정광 원료 수요가 더욱 확대될 것으로 기대된다.
2026년 9월 12일 16:51
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
2026년 9월 11일 17:43
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
더 보기
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
2026년 9월 11일 17:43
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
2026년 9월 11일 16:30
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
더 보기
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
[SMM Flash] Amigo Resources는 탄자니아 선별 시료에 대한 독립 실험실 결과를 발표했으며, 복합 PGM 함량이 6.94~7.07ppm, 잔류 금 함량이 3.27~3.47ppm으로 나타났다고 밝혔다. 회사는 중력 선광 테일링 및 기타 잔류 물질로부터 회수율을 높이기 위해 자체 PGM 정광 기술을 처리 공정에 통합하는 방안을 검토 중이라고 전했다. Amigo는 또한 건식 제련 구리 매트 처리 경로를 평가하고 있으며, 추가 시험을 위해 소형 용광로를 투입했다. 이번 프로그램은 후속 제련 연구에서 경제적 회수 가능성이 입증될 경우, 탄자니아 복합 금속 광물에서 PGM을 회수 가능한 부산물로 확립할 수 있을 것으로 기대된다. 다만 보고된 품위는 선별된 시험 물질 및 처리 연구에 국한된 것으로, 적격 광물자원량, 매장량 또는 상업적 규모의 PGM 생산 증거로 간주될 수 없다. 따라서 보고된 PGM 함량이 경제적으로 회수 가능한 제품 흐름으로 이어질 수 있는지 판단하기 위해서는 추가적인 제련 시험이 중요할 전망이다.
2026년 9월 11일 16:30