Exclusive: China's base metals output in Sep

게시됨: Oct 11, 2019 18:29
A roundup of China's base metals output in September 2019, from an SMM survey of major producers

SHANGHAI, Oct 11 (SMM) – This is a roundup of China's base metals output in September 2019, from an SMM survey of major producers.

Copper

China’s production of copper cathode fell unexpectedly in September, showed an SMM survey, as tight supply of raw materials, copper anode and scrap led to weaker-than-planned output from some smelters.

China produced a total of 759,300 mt of copper cathode last month, down 1.09% from a month ago but up 5.93% from a year ago. SMM had expected production to increase from 767,700 mt in August to 782,300 mt. 

For the first nine months of 2019, production of copper cathode across China amounted to 6.56 million mt, up 0.79% from the same period last year.

Dongying Fangyuan, Tongling Nonferrous, Baiyin, Wuzhou Jinsheng, Qingyuan Jiangtong and Jinchuan Group all reported production that fell short of their original plans, as blister copper supply tightened after the shutdown of some smelters and a decline in imports. 

Yunnan Copper’s branch in Chifeng, Inner Mongolia, closed 150,000 mt/year capacity on September 23, which also contributed to the production decline.

Prices of sulphuric acid, meanwhile, remained sluggish, and some regions have seen the prices failing to cover production costs. This has yet to impact production at smelters.

Zijin Mining’s newly-commissioned copper smelting project, with annual capacity of 150,000 mt, in Heilongjiang began to turn out copper cathode on October 1. Guangxi Nanguo is ramping up, with capacity utilisation rate exceeding 60%.

Chifeng Yunnan Copper’s 200,000 mt/year capacity began trial operation on October 2, while Baiyin Nonferrous resumed its 200,000 mt/year project in the second half of September.

SMM expects China’s production of copper cathode to grow to 778,300 mt in October, 8.01% higher than the corresponding month of 2018.

This will bring production in January-October to 7.34 million mt, up 1.51% from a year earlier.

Tight supply of copper anode and scrap will continue to weigh on Chinese smelters. Tongling Nonferrous’ Jinguan Copper unit will begin an overhaul from October 10.

Alumina

China's output of alumina stood at 5.65 million mt in September, with metallurgical grade alumina accounting for 5.4 million mt.

Daily average production of metallurgical grade alumina remained unchanged from a month ago at 180,000 mt, as higher production at Xing’an Chemicals, Shanxi Huaqing, Chalco Zhongzhou, and Inner Mongolia Mengxi offset output declines in East Hope’s Sanmenxia plant and SPIC Shanxi Renewable Energy. Delayed or slow resumption amid to a weakened market, pre-holiday environmental curtailments and bauxite shortage impacted output at some refineries.  

SMM expects domestic production of alumina to rise to 6.06 million mt in October, which includes 5.81 million mt of metallurgical grade alumina. 

Daily average output of metallurgical grade alumina will be lifted to 187,000 mt, on the expected resumption of Xinfa's Jiaokou refinery in late October, and greater production at SPIC Shanxi after technical reformation of its two lines. Optimistic outlook on prices will also spur production at some plants. 

As of October 11, capacity of metallurgical grade alumina in operation stood at 65.67 million mt on an annualised basis.

Aluminium

Domestic production of primary aluminium fell 3.7% from a year ago to 2.89 million mt in September. Output in the first nine months of this year stood at 26.46 million mt, with a year-over-year decline of 2.1%.

Accidents at Inner Mongolia’s smelters in September and output cuts in Shandong and Xinjiang in August kept overall primary aluminium capacity in operation at lows last month. By the end of September, capacity in operation came in at 35.05 million mt/year, with suspended and idling capacity standing at 5.25 million mt/year (excluding non-compliant capacity). 

Operating rates across domestic primary aluminium smelters averaged 87% by the end of September, up 1.2 percentage points from a month earlier.

More capacity is expected to come online or recover in October. SMM learned that closed smelters in Gansu and Qinghai showed stronger inclinations to restart on bullish sentiment about prices. Capacity additions will be concentrated to Inner Mongolia in October, with slow commissioning in other areas. Resumption of accident-hit capacity will be closely monitored. 

SMM expects China’s primary aluminium output to reach 3.01 million mt in October, down 3.34% year on year. Domestic inventories of primary aluminium may remain in a downtrend in the second half of October, slipping to 890,000 mt by the end of this month.

Nickel

China’s production of refined nickel grew 4.97% from August to 13,300 mt in September, as a smelter in Gansu recovered from maintenance and also a smelter in Shandong moved up a gear to chase higher margins after refined nickel turned more profitable than nickel sulphate.

The production growth was capped by maintenance at a smelter in Jilin.

On a year-over-year basis, refined nickel output rose 21.81% in September.

SMM expects production to inch up to 13,500 mt in October, in anticipation of greater output from Gansu and stable operations at other smelters.

Nickel pig iron (NPI)

Output of NPI in China dipped 0.79% month on month but rose 27.59% year on year to 52,700 mt in Ni content in September. 

The production decline from August was moderate, as healthy profits kept smelters in normal operations. Authorities did not require major plants in the north to slash production around the National Day holiday, while power supply controls had limited impact on plants in Inner Mongolia.

High-grade NPI accounted for 46,100 mt in Ni content last month, up 0.38% from August, while production of low-grade materials declined 8.26% to 6,600 mt in Ni content as a slew of plants conducted maintenance.

China’s NPI production is expected to decline 2.28% from August to 51,540 mt in Ni content in October, as output of high-grade materials will shrink 2.28% to 44,800 mt in Ni content after a mill in east China suspended for maintenance for several days at the start of the month.

The recovery from maintenance at some plants will bolster output of low-grade NPI up 2.57% to 6,800 mt in Ni content this month.

Nickel sulphate

China produced 42,700 mt of nickel sulphate in September, down 4.79% month on month but up 20.01% year on year. This translated to 9,403 mt in Ni content.

The production shrank from August, as some producers suspended for the National Day holiday and some cut output or turned to refined nickel on poor demand. 

Integrated nickel sulphate and precursor plants made deeper cuts in their nickel sulphate production, as producing the material from nickel briquette or powder continues to incur losses.

Production of nickel sulphate across China will likely extend its decline in October, down 2.11% from September to 41,800 mt, or 9,205 mt in Ni content, as demand from the new energy vehicle sector recovered slower than expected.
But some nickel sulphate producers reported improvement in orders.

Zinc

China's production of refined zinc continued its increases and hit a record monthly high in September, as smelters ramped up raw materials feeding and postponed maintenance to chase higher margins. 

SMM data showed that about 515,700 mt of refined zinc was produced across China last month, up 3.3% from August and up 15.43% from September 2018. Surveyed capacity remained unchanged at 6.085 million mt/year. Production in January-September amounted to 4.25 million mt, up 7.08% from the same period last year. 

Smelting companies of Hanzhong, Hunan Zhuzhou, and Sihuan raised production slightly in September; Hechi Nanfang, Chifeng NFC, and Xing’an Copper & Zinc restarted from maintenance and contributed to a greater share of the output growth. 

With resumed producers further stepping up production, domestic output of refined zinc is expected to grow 1.09% on the month and 13.5% on the year to 521,300 mt in October. Output in January-October will expand 7.75% from a year ago.

Lead

Primary lead output in China fell as expected in September as producers in major production province of Henan faced output controls amid anti-smog alert across Beijing, Tianjin, Hebei and surrounding areas in late September. 

SMM data showed that domestic output of primary lead stood at 249,600 mt in September, down 1.77% from August and 2.74% from September 2018. Production in the first nine months of this year remained 0.52% higher than the same period a year ago. 

Last month, maintenance at large and medium scale smelters of Henan Yuguang, Jiangxi Copper, and Yunnan Mengzi affected production, which offset the output growth from recovery of Hechi Nanfang, Henan Minshan, and Hunan Shuikoushan. 

Smelters that resumed from August’s overhaul accelerated production as elevated treatment charges (TCs) of lead concentrate improved their margins. This capped the decline in overall production in September. SMM assessed that quotes of the monthly TCs for domestic Pb 50% lead concentrate have climbed to 1,900-2,100 yuan/mt on metal content basis. 

For October, China’s primary lead market is likely to see a rebound of around 10,000 mt in production as environmental cutbacks were lifted in Henan and as Henan Yuguang, Xing’an Silver & Lead, and Yunnan Mengzi will conclude maintenance. Scheduled overhaul at Henan Wanyang will limitedly impact production in October.

Tin

Production of refined tin in China lost 3.2% from August and stood at 12,414 mt in September. The decline was due to a production cut across major smelters amid feedstock supply tightness. 

Smelters in Yunnan province lowered output as ore supply tightened up from August, and smelters in Jiangxi province also scaled back production or suspended on raw materials shortage. Smelters in other areas mostly maintained normal operation last month. 

SMM estimates domestic production of refined tin to fall to 12,300 mt in October as the continued ore resource tightness lowers treatment charges and impacts output.

 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
중앙 및 동아프리카의 광업 부문이 더 큰 부가가치 창출로 나아가고 있다.
8시간 전
중앙 및 동아프리카의 광업 부문이 더 큰 부가가치 창출로 나아가고 있다.
더 보기
중앙 및 동아프리카의 광업 부문이 더 큰 부가가치 창출로 나아가고 있다.
중앙 및 동아프리카의 광업 부문이 더 큰 부가가치 창출로 나아가고 있다.
[SMM Express] 중앙 및 동아프리카 광업 부문은 정부들이 자원 민족주의, 현지 콘텐츠 요건, 국내 광물 가공에 중점을 두면서 변화하는 사업 환경에 직면하고 있다. 해당 지역 국가들은 국내 선광(가공)을 장려하고 국가 참여를 강화함으로써 광물 자원에서 더 많은 가치를 확보하려고 노력하고 있다. 탄자니아, 모잠비크, 잠비아, 에티오피아의 정책은 원자재 수출에서 벗어나 국내 가공 역량을 개발하는 방향으로의 광범위한 전환을 보여준다. 이 지역은 여전히 글로벌 광물 공급망의 핵심이며, 콩고민주공화국(DRC)이 코발트 수출을 주도하고, 중앙아프리카 구리 벨트가 주요 구리 생산을 뒷받침하며, 여러 국가에서 리튬, 탄탈럼, 니오븀, 텅스텐, 흑연의 상당량이 매장되어 있다. 그러나 광업 투자는 안보 위험, 규제 불확실성, 인프라 제약, 운영상 한계 등 과제에 계속 직면하고 있다. 여러 국가들이 전략 광물 분류를 확대하고 있어 수출 통제 강화, 로열티 인상, 정부 개입 확대로 이어질 수 있다.
8시간 전
중국의 15차 5개년 계획이 백금족 금속(PGMs)의 중요성을 높여 남아공 광산 투자를 촉진한다
8시간 전
중국의 15차 5개년 계획이 백금족 금속(PGMs)의 중요성을 높여 남아공 광산 투자를 촉진한다
더 보기
중국의 15차 5개년 계획이 백금족 금속(PGMs)의 중요성을 높여 남아공 광산 투자를 촉진한다
중국의 15차 5개년 계획이 백금족 금속(PGMs)의 중요성을 높여 남아공 광산 투자를 촉진한다
[SMM PGM Express] 중국의 제15차 5개년 계획은 수소연료전지 기술, 첨단 전자기기, 인공지능 인프라 및 배출가스 제어 시스템에서의 중요성으로 인해 백금족 금속을 전략적 소재로 격상시켰다. 중국은 국내 백금족 금속 자원이 제한적이어서 수입에 크게 의존하고 있으며, 특히 남아프리카공화국과 러시아 등 주요 생산국으로부터의 수입이 많아 공급 안보와 장기 조달 전략의 중요성이 커지고 있다. 한편, 남아프리카공화국은 글로벌 금속 공급망 내 입지를 지속적으로 강화하고 있다. DRDGold의 Vision 2028 확장 프로그램은 약 100억 랜드 규모로, 광미 재처리 용량을 월 215만 톤에서 300만 톤으로 늘리고 2028년까지 연간 금 생산량을 약 6톤으로 확대하는 것을 목표로 한다. 이미 50억 랜드 이상이 투입된 것으로 전해졌으며, Far West Gold Recoveries 인프라에 대한 물 사용 허가 승인이 여전히 중요한 이정표로 남아 있다. 중국의 핵심 광물 수요 증가와 남아공의 가공 능력에 대한 지속적인 투자는 공급 확보와 자원 효율성 향상을 위한 광범위한 업계 노력을 반영한다. 기회는 여전히 크지만, 시장 참여자들은 정책 변화, 통화 변동성, 운영 비용 압박, 향후 백금족 금속 응용 분야에서의 기술적 대체 가능성 등의 위험을 계속 주시하고 있다.
8시간 전
밸테라 플래티넘과 유미코아 MDS, 전자 산업용 PGM 전기도금 기술 협력
9시간 전
밸테라 플래티넘과 유미코아 MDS, 전자 산업용 PGM 전기도금 기술 협력
더 보기
밸테라 플래티넘과 유미코아 MDS, 전자 산업용 PGM 전기도금 기술 협력
밸테라 플래티넘과 유미코아 MDS, 전자 산업용 PGM 전기도금 기술 협력
[SMM PGM Express] 발테라 플래티넘과 유미코어의 금속 증착 솔루션(MDS)은 산업용 전기 도금 분야에서 백금족 금속(PGM) 응용을 확대하기 위한 다년간의 연구개발 및 상용화 파트너십을 출범시켰다. 이번 협력은 초기에는 커넥터 응용 등을 포함한 전자 부문의 고속 백금 전기 도금 기술에 집중할 예정이며, 이 분야에서 백금은 금에 비해 내구성이 뛰어나고 비용 효율적인 대안을 제공할 수 있다. 산업용 금 수요가 연간 950만 온스를 초과하는 가운데, 이번 파트너십은 백금이 고부가가치 응용 분야에서 새로운 수요 기회를 포착할 가능성을 부각시킨다. 합의에 따라 발테라 플래티넘은 초기 3년간 자금을 지원하고, 유미코어 MDS는 재료 화학, 표면 기술 및 산업 규모 공정 개발에 관한 연구개발 전문성을 제공해 솔루션을 실험실 연구에서 상용화 준비 단계로 발전시킨다. 이 이니셔티브는 PGM 생산업체들이 전통 시장을 넘어 수요를 다각화하고 백금의 새로운 산업 용도를 창출하려는 광범위한 노력의 일환이다. 첨단 전자기기 도입 확대와 보다 효율적인 귀금속 대체재 탐색은 향후 수요 성장을 뒷받침할 수 있다. 이번 파트너십은 또한 백금의 경쟁력을 높이고 신기술 분야에서의 역할을 확대하는 혁신적 응용 분야를 개발함으로써 PGM 업계가 장기적인 시장 과제에 대응하려는 지속적인 노력을 반영한다.
9시간 전
Exclusive: China's base metals output in Sep - Shanghai Metals Market (SMM)