[SMM survey] September stainless steel industry PMI comprehensive index month-on-month decline at the beginning of October by 3 series output or continue to weaken

게시됨: Oct 08, 2019 10:10 (GMT+8)

SMM, 8 Oct:

The final value of the PMI comprehensive index of the stainless steel industry in September was 48.13%, lower than the rise and fall line, down 1.47% from August, and 0.47% lower than the expected value. Due to Indonesia's implementation of an early mining ban at the end of August, nickel prices skyrocketed, stainless steel plants in September are in a difficult situation, stainless steel increases can not keep up with cost increases, most steel mills without RKEF face losses, and the cost is getting higher and higher how to ship goods is a big problem, it can be said that from the situation before National Day, the expected reduction in production is on the rise. The production index is 47.76%. Most of the stainless steel plants maintained normal production in September when there was still a stock of low-cost raw materials in the early stage, and the output did not decrease significantly. The decline was mainly due to the fine-tuning of some steel mills and the small reduction in some small steel mills. New order index 47.76%, compared with the overall high inventory and high scheduling of stainless steel factory, the order situation appears to be relatively inferior, there is no "gold nine silver 10" exuberant, but the downstream of stainless steel also has the ability to passively accept the price increase, demand has not been frustrated by the price increase of stainless steel for the time being. The purchasing volume index is 49.05%, and the raw material inventory index is 37.18%, all of which are lower than the rise and fall line. During the shock of the high nickel price, the steel mill and the nickel pig iron factory played a fierce game, but under the persistence of the nickel pig iron plant and the capital operation of the traders, the high price transaction was gradually implemented, and the cost level of the stainless steel plant rose in an all-round way. In September, the purchase price index was as high as 95.40%.

In October, the initial value of the PMI comprehensive index in the stainless steel industry was 46.23%, 1.9% lower than the final value in September, of which the production index was the most obvious, with a reduction of 11.94% to 35.83%. The high price of nickel pig iron was gradually implemented, and there were still signs of continuing to raise prices until National Day. It is expected that the probability of production reduction in non-integrated stainless steel plants will rise significantly next month under tremendous operating pressure. At the end of September, a stainless steel plant in East China announced plans to reduce production, which is expected to affect the output of 300 series of 20,000 tons, while the northern stainless steel plant also has a tendency to reduce the proportion of 3 series. The new order index is 49.05%, 1.29% higher than the final value in September, and the product inventory index 52.06% is 2.06% higher than the final value in September. The surveyed enterprises said that the order situation in October did not improve significantly, not only the social inventory is high, each steel mill also has some in-plant inventory, the later cost pressure and shipment pressure are more prominent. The purchasing volume index is 46.95%, and the raw material inventory index is 49.05% lower than the rise and fall line. The decrease of purchasing volume is mainly caused by the decrease of the proportion of 3 series and the reduction of production in some 300 series stainless steel plants. It is very important for steel mills to stabilize procurement and stable production, but in view of the high cost of products in the later stage, once the market falls, they will lose a lot of money, so they are purchased according to rigid demand, and the stock of raw materials in steel mills is on the low side. some steel mills focus on increasing the proportion of scrap stainless steel.

(for more information, please consult SMM, if you find it valuable, please move your finger to help forward it! )

"Application for downstream industry PMI composite index report trial

Welcome to contact Shanghai Colored Network big data-Nickel team:

Shanghai colored net big data-nickel Liu Yuqiao

Tel: + 86-21-5166 6804

Shanghai colored net big data-nickel Gao Yin

Tel: + 86-21-5166 6865

Shanghai colored net big data-nickel Duan Chunjing

Tel: + 86-21-5166 6896

Shanghai colored net big data-nickel Wang Tong

Tel: + 86-21-5166 6855

Shanghai colored net big data-nickel Wu Ruoyao

Tel: + 86-21-5159 5864

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[SMM 분석] IMIP의 수자원 관련 NPI 감산, 스테인리스 수요 약세와 맞물려
5시간 전
[SMM 분석] IMIP의 수자원 관련 NPI 감산, 스테인리스 수요 약세와 맞물려
더 보기
[SMM 분석] IMIP의 수자원 관련 NPI 감산, 스테인리스 수요 약세와 맞물려
[SMM 분석] IMIP의 수자원 관련 NPI 감산, 스테인리스 수요 약세와 맞물려
IMIP의 RKEF NPI 공장들은 물 부족으로 가동률을 30~40% 축소하기 시작했다. 장기간 감산이 이어질 경우 누적 NPI 생산량은 10만 톤 이상 감소할 수 있으며, 이는 니켈 함량 11% 기준으로 환산 시 1만 1천 톤 이상에 해당한다. 한편, 수요 부진으로 중국의 10월 300계 스테인리스 생산량은 10만 톤 이상 감소할 것으로 예상된다. 높은 NPI 재고가 초기 충격을 완화할 수 있으나, 가격 지지 여부는 차질 지속 기간과 하류 구매 동향에 달려 있다.
5시간 전
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 23일)
5시간 전
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 23일)
더 보기
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 23일)
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 23일)
다음 표는 2026년 9월 23일 상하이선물거래소(SHFE)와 다롄상품거래소(DCE)의 철금속 및 비철금속 거래 동향을 보여줍니다.
5시간 전
【SMM 니켈 플래시】인도네시아 니켈 시장 업데이트 — 2026년 9월 23일
6시간 전
【SMM 니켈 플래시】인도네시아 니켈 시장 업데이트 — 2026년 9월 23일
더 보기
【SMM 니켈 플래시】인도네시아 니켈 시장 업데이트 — 2026년 9월 23일
【SMM 니켈 플래시】인도네시아 니켈 시장 업데이트 — 2026년 9월 23일
인도네시아 니켈 광석 시장은 9월 23일 안정세를 유지했으며, SMM이 평가한 인도네시아 니켈 광석 목적지 항구 인도 가격은 주요 등급 전반에 걸쳐 변동이 없었다. Ni 1.2%: $26.5/wmt, 변동 없음. Ni 1.3%: $28.5/wmt, 변동 없음. Ni 1.4%: $51.8/wmt, 변동 없음. Ni 1.5%: $58.5/wmt, 변동 없음. Ni 1.6%: $63.4/wmt, 변동 없음. 시장에서는 2026년 RKAB 추가 승인 물량이 점진적으로 유입되면서 앞선 니켈 광석 부족 완화에 도움이 되고 있다. 다만 추가 쿼터의 총량은 아직 공식 발표되지 않았으며, 쿼터 집행 속도는 향후 광석 공급과 제련소 생산에 있어 핵심 변수로 남아 있다. 한편, 엘니뇨로 인한 가뭄이 공급 측면의 새로운 우려 요인으로 부상했다. IMIP는 물 부족으로 일부 제련소가 NPI 생산량을 줄여야 했지만, 가동이 중단되지는 않았다고 확인했다.
6시간 전