SMM Morning Comments (Sep 12)

게시됨: Sep 12, 2019 09:45
LME base metals closed mostly lower while SHFE metals grew for the most part overnight, with tin as the best performer

SHANGHAI, Sep 12 (SMM) – 

Copper: Prices of copper fell last night, pressured by a higher greenback on an unexpected increase in US producer price data. Trade uncertainties and limited improvement in global economic weakness will constrain any upside potential for copper prices in the near term. Three-month LME copper shed 0.5% last night to close at $5,780/mt, with its SHFE counterpart ending down 0.25% at 47,110 yuan/mt. Pressure from the five-day moving average and a lack of technical support may keep the SHFE November contract between 46,900-47,400 yuan/mt today, with LME copper at $5,770-5,820/mt. Spot premiums will be firm at 110-140 yuan/mt on the last trading day before the mid-autumn festival holiday. 

Aluminium: Three-month LME aluminium came off from highs as shorts added their positions. It pared gains from the previous two sessions, losing 0.27% to close at $1,816.5/mt. However, loaded-up longs buoyed the most-traded SHFE November contract to highs around 14,470 yuan/mt, before it retreated to end slightly higher on the day at 14,415 yuan/mt. Further declines in domestic primary aluminium inventories may support it at 14,350-14,500 yuan/mt today, with LME aluminium trading between $1,770-1,820/mt. 

Zinc: Bullish longs on falling LME zinc inventories drove three-month LME zinc to close higher for the second consecutive trading day, as it ended up 0.5% at $2,355/mt. Fundamentals may support it at $2,330-2,380/mt today. The most-active SHFE November contract lost support from the Bollinger upper band as it came off from a high of 19,375 yuan/mt, to 19,180 yuan/mt. Sustained support from the five-day moving average settled it some 0.2% higher on the day at 19,175 yuan/mt. Expectations of near-term supply recovery may cap any upward momentum in prices, and keep them between 19,000-19,500 yuan/mt today. 

Nickel: Three-month LME nickel extended losses from the previous session even as it rebounded after fell to around the five-day moving average, closing down 0.5% at $17,860/mt. Support from the five- and 10- day moving averages should be monitored today. The most-active SHFE contract slipped after traded within a narrow band around the daily moving average. The five-day moving average, or the 142,200 yuan/mt level prevented it from dipping further and settled it 0.24% lower at 142,980 yuan/mt. Today, the contract will continue to test support from the five-day moving average. 

Lead: Three-month LME lead relinquished gains after it recovered from a low of $2,076/mt to hit a high of $2,109/mt, ending down 0.6% at $2,077.5/mt. Pressure remained heavy from the $2,100/mt level. The most-liquid SHFE October contract consolidated around 17,380 yuan/mt and finished 0.12% higher at 17,410 yuan/mt. Near-term price trend could be determined by the strictness of potential further environmental restrictions. 

Tin: A buildup of longs lifted the most-active SHFE 2001 contract steeply to a high of 142,360 yuan/mt, after it opened at 140,110 yuan/mt and bottomed out at 139,500 yuan/mt. It closed 1,900 yuan/mt higher on the day at 141,750 yuan/mt, with pressure above expected at 142,500 yuan/mt today. Three-month LME tin hovered within a tight range around the opening level of $17,325/mt, before it followed its SHFE counterpart to jump to a high of $17,750/mt, closing up $170/mt at $17,595/mt. Resistance above is likely at $18,000/mt. 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
18시간 전
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
더 보기
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
18시간 전
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
20시간 전
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
더 보기
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
[SMM Flash] Amigo Resources는 탄자니아 선별 시료에 대한 독립 실험실 결과를 발표했으며, 복합 PGM 함량이 6.94~7.07ppm, 잔류 금 함량이 3.27~3.47ppm으로 나타났다고 밝혔다. 회사는 중력 선광 테일링 및 기타 잔류 물질로부터 회수율을 높이기 위해 자체 PGM 정광 기술을 처리 공정에 통합하는 방안을 검토 중이라고 전했다. Amigo는 또한 건식 제련 구리 매트 처리 경로를 평가하고 있으며, 추가 시험을 위해 소형 용광로를 투입했다. 이번 프로그램은 후속 제련 연구에서 경제적 회수 가능성이 입증될 경우, 탄자니아 복합 금속 광물에서 PGM을 회수 가능한 부산물로 확립할 수 있을 것으로 기대된다. 다만 보고된 품위는 선별된 시험 물질 및 처리 연구에 국한된 것으로, 적격 광물자원량, 매장량 또는 상업적 규모의 PGM 생산 증거로 간주될 수 없다. 따라서 보고된 PGM 함량이 경제적으로 회수 가능한 제품 흐름으로 이어질 수 있는지 판단하기 위해서는 추가적인 제련 시험이 중요할 전망이다.
20시간 전
팬 글로벌, 스페인 카르메네스 프로젝트에서 백금-팔라듐 광화대 보고
20시간 전
팬 글로벌, 스페인 카르메네스 프로젝트에서 백금-팔라듐 광화대 보고
더 보기
팬 글로벌, 스페인 카르메네스 프로젝트에서 백금-팔라듐 광화대 보고
팬 글로벌, 스페인 카르메네스 프로젝트에서 백금-팔라듐 광화대 보고
[SMM 속보] Pan Global Resources는 스페인 북부에 위치한 자사 100% 소유의 Cármenes 프로젝트에서 추가 시추 결과를 발표했으며, 더 넓은 금-구리-니켈-코발트 광화 시스템 내에서 백금과 팔라듐을 확인했다. 홀 PVD15는 지표에서부터 15m 구간에서 금 3.90g/t, 구리 0.04%, 니켈 0.11%, 코발트 0.12%의 품위를 보였으며, 이 중 8m 구간에서는 백금 0.50g/t, 팔라듐 0.28g/t의 품위를 나타냈다. 이 구간 내 1m 구간에서는 백금 1.39g/t, 팔라듐 0.74g/t를 기록했으며, 이는 Pt+Pd 합계 2.13g/t에 해당한다. 회사에 따르면, 이 광화대는 기존 Providencia 광산 작업 구역을 넘어 연장되며 주향 방향과 심도 방향으로 계속 열려 있다. 이번 결과는 Cármenes 다금속 시스템 내 PGM 광화 작용의 추가적인 증거를 제공하며, 프로젝트 광물 자원량에 백금 및 팔라듐 부산물 가치를 더할 가능성이 있다. 다만 보고된 교차 구간은 탐사 결과이며, 광물 자원량, 매장량 또는 미래 생산량 추정치를 의미하지 않는다.
20시간 전
SMM Morning Comments (Sep 12) - Shanghai Metals Market (SMM)