[brief comment on Copper in SMM] domestic economic data are good for copper prices to hit the 47000 mark.

게시됨: Jul 15, 2019 16:29 (GMT+8)
A brief Review of SMM Copper on July 15

SMM July 15-Today Shanghai Copper main contract 1909 opened in the morning at 46730 yuan / ton, immediately after the opening of the day to the lowest position of 46620 yuan / ton, and then bulls actively into the market, the market all the way up to the daily highest level of 47000 yuan / ton, up 47000 yuan / ton gate. After the high and small consolidation, the center of gravity of the disk continued to move down, and settled between 46830 and 46940 yuan / ton, and closed at 46910 yuan / ton at the end of the plate. It rose 250 yuan per ton, or 0.54 percent. Today, Shanghai Copper's main contract position increased by 14000 hands to 250000 hands, while trading volume increased by 38000 hands to 154000 hands. Today, the Shanghai Copper Index increased its position by about 10, 000 to 593000, while trading volume increased by 49000 to 275000. Today, Shanghai copper in the non-ferrous plate capital inflow bright eye, up to 218 million, mainly bullish copper price trend, positive layout. The overall performance of Shanghai copper today was volatile, mainly due to better-than-expected data on the Chinese economy, GDP data, industrial value added and retail sales of consumer goods, which were positive for commodity trends. At the same time, the market expects the Federal Reserve to cut interest rates further, the dollar also maintained a volatile downward trend today, the copper price has also been supported. Today, Shanghai copper closing entity Dayang column, K line formed 4 Lianyang trend, below by the 10-day EMA support, KDJ index opening to expand strong, MACD index red column elongated, technical good copper price. In the evening, wait for the guidance of the outside market to test whether Shanghai copper can stand firm and rush to the 47000 yuan / ton gate level.

Today, the Shanghai Copper 1907 contract faces delivery, opening at 46550 yuan / ton in the morning, then sliding to the lowest level of 46450 yuan / ton in the day, and then rising all the way to a high of 46800 yuan / ton. Then the center of gravity moved down to 46720 yuan / ton and closed at 46670 yuan / ton at the end of the day. Settled at 46570 yuan / ton, delivery volume reached 12475 tons, the current 1907-1908 contract price difference of 80 yuan / ton.

(SMM Song Yao)

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
【속보 | Novametal의 몰리브덴 기준가 상승, 그러나 316 할증료 전가는 여전히 제한적】
3분 전
【속보 | Novametal의 몰리브덴 기준가 상승, 그러나 316 할증료 전가는 여전히 제한적】
더 보기
【속보 | Novametal의 몰리브덴 기준가 상승, 그러나 316 할증료 전가는 여전히 제한적】
【속보 | Novametal의 몰리브덴 기준가 상승, 그러나 316 할증료 전가는 여전히 제한적】
노바메탈 USA는 2026년 10월 스테인리스 냉간인발선 원자재 할증료를 발표했다. 몰리브데넘 평균가는 파운드당 33.2230달러에서 33.5558달러로 1.0% 상승했으며, 이는 톤당 약 7만 3,244달러 및 7만 3,978달러에 해당한다. 그러나 니켈과 크로뮴 평균가는 각각 1.9%, 1.2% 하락했다. 이에 따라 316 합금 할증료는 파운드당 1.94달러에서 1.92달러로, 316L은 1.98달러에서 1.97달러로 내렸다. 에너지 할증료가 파운드당 0.10달러에서 0.12달러로 오른 후, 316 총 할증료는 파운드당 2.04달러로 변동이 없었고 316L은 2.09달러로 소폭 상승했다. SMM 분석: 니켈과 크로뮴 약세가 몰리브데넘 비용 상승을 일부 상쇄하며 하류 가격 전가를 제한했다.
3분 전
【속보 | 이튼 스틸, 10월 몰리브덴 할증료 인상】
4분 전
【속보 | 이튼 스틸, 10월 몰리브덴 할증료 인상】
더 보기
【속보 | 이튼 스틸, 10월 몰리브덴 할증료 인상】
【속보 | 이튼 스틸, 10월 몰리브덴 할증료 인상】
이튼 스틸 바 컴퍼니는 2026년 10월 스크랩 및 합금 할증료 일정을 발표하며, 목록에 포함된 모든 몰리브데넘 함유 강종의 몰리브데넘 성분을 인상했다. 4000계 강종의 몰리 할증료는 US$9.49/cwt에서 US$9.77/cwt로 인상되었으며, 이는 강재 톤당 약 US$209.22에서 US$215.39에 해당한다. 4600계는 US$15.18/cwt에서 US$15.64/cwt로 올랐고, 9260 강종은 US$3.64/cwt에서 US$3.81/cwt로 인상되었다. 인상 폭은 약 3.0%에서 4.7% 수준이었다. 스크랩 할증료는 US$14.50/cwt로 변동 없이 유지되었다. SMM 분석: 10월 인상은 주로 합금 성분에서 비롯되었으나, 이 할증료를 몰리브데넘 현물 가격의 직접적인 지표로 간주해서는 안 된다.
4분 전
KGHM과 South32, 시에라 고르다 확장에 7억 2,500만 달러 투자…구리 생산능력 26% 증대
2026년 10월 02일 16:31 (GMT+8)
KGHM과 South32, 시에라 고르다 확장에 7억 2,500만 달러 투자…구리 생산능력 26% 증대
더 보기
KGHM과 South32, 시에라 고르다 확장에 7억 2,500만 달러 투자…구리 생산능력 26% 증대
KGHM과 South32, 시에라 고르다 확장에 7억 2,500만 달러 투자…구리 생산능력 26% 증대
KGHM과 South32가 칠레 아타카마 지역의 시에라 고르다 구리-몰리브덴 광산에서 네 번째 분쇄 라인 건설에 착공했다. 7억 2,500만 달러 규모의 이번 확장 공사는 2027년 1월부터 3년간 진행되며, 2029년 말 완공 후 2030년 하반기에 전체 생산량에 도달할 예정이다. 광석 처리 능력은 하루 13만 1,000톤에서 16만 5,000톤으로 26% 증가한다. 연간 구리 생산량은 2025년 16만 5,000톤에서 19만 5,000톤으로 늘어날 전망이며, 부산물로 몰리브덴 6,000톤, 금 5만 8,000온스, 은 170만 온스가 생산된다. 이 프로젝트는 900개 이상의 직접 일자리를 창출하며, 운영 현금 흐름과 부채로 자금을 조달한다. 단위 운영 비용은 약 10% 감소할 것으로 예상된다.
2026년 10월 02일 16:31 (GMT+8)