Intensified production cuts in Tangshan bolster steel prices

게시됨: Jun 24, 2019 18:53
Strict implementation of the cutbacks is expected to affect production of pig iron by 3.85 million mt, SMM assessed

SHANGHAI, Jun 24 (SMM) – Thirty-four steel mills in Tangshan will face intensified production curbs till the end of July, as the top steelmaking city in China extended cuts on local steelmakers for better air quality. Steel prices rallied on Monday June 24 after the release of the decision over the weekend.

Strict implementation of the cutbacks is expected to affect production of pig iron by 3.85 million mt, crude steel by 4.08 million mt, and disrupt demand for iron ore by 6.62 million mt, SMM assessed. 

The curbs will also impact the local monthly capacity of steel plates by almost 2 million mt, and the monthly capacity of rebar and wire rods by 1.3 million mt. SMM learned that steel plate products accounted for about 30% of the total affected capacity across local steel mills, and rebar and wire rods took up more than 20%. 

Prices of common steel billet in Tangshan extended their increase by 50 yuan/mt, to stand at 3,580 yuan/mt as of Monday June 24, after they gained 70 yuan/mt over the weekend, bolstered by news that Tangshan government held a meeting on environmental protection on June 22. 

At closing on Monday June 24, the most-traded rebar contract on the Shanghai Futures Exchange jumped 2.31% on the day to close at 3,904 yuan/mt, with a top of 3,966 yuan/mt, the highest after the Chinese New Year holiday. 

The most-traded SHFE hot-rolled coil contract also hit the highest post-CNY, at 3,928 yuan/mt, ending 3.69% higher on the day at 3,846 yuan/mt. 

SMM expects steel prices to rally further as supplies shrink and demand fails to decline considerably. 

As of Monday June 24, spot prices of rebar expanded by 30-90 yuan/mt from last Friday, with the national average price rising 62.3 yuan/mt on the week. Prices of spot hot-rolled coil advanced 50-100 yuan/mt across domestic markets, from levels last Friday. 

An SMM survey found that a steelmaker in Lunan district of Tangshan currently runs two out of five blast furnaces, which is expected to affect 20% of the normal production of molten iron (14,000 mt/day), and impact 20% of the output of medium thick steel plate. 

SMM also learned that production cuts on steelmakers in Fengnan district started today, as a mill is shutting down a blast furnace of 1,080 m³. The closure is expected to affect the output of molten iron by 3,000 mt/day and impact sintering capacity totalling 7,000-8,000 mt. 

A steel plant in Zunhua district halved its capacity with two blast furnaces closed, and a producer in Caofeidian district shuttered one out of three blast furnaces, with plans of further cutbacks. 

Tangshan's move came after the recent intensification of anti-smog measures in Wu’an of Hebei province, Lvliang of Shanxi, and Anyang of Henan. But steelmakers in Anyang were only ordered to cut sintering capacity, which means that producers could procure lump, pellet ore to maintain steel production. 

 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
2026년 9월 11일 18:30
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
더 보기
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
On September 9, 2026, Australia initiated its second sunset review of anti-dumping measures on galvanized steel sheet from India, Malaysia and Vietnam, and separately launched a sunset review of countervailing measures on imports from India. The review covers July 2025-June 2026, with the final report expected by February 11, 2027. As galvanized steel is the largest end-use sector for zinc, the measures directly affect export costs and competitiveness, potentially impacting Australia’s domestic zinc demand and supply chain. Maintaining the duties would provide some protection for domestic steel and coating capacity, while termination could increase low-priced imports and affect regional zinc consumption. The final outcome remains subject to the authorities’ determination.
2026년 9월 11일 18:30
JCC 홍위안 구리, 2억 달러 확장 프로젝트로 2027년까지 생산능력 55만 톤 목표
2026년 9월 7일 15:43
JCC 홍위안 구리, 2억 달러 확장 프로젝트로 2027년까지 생산능력 55만 톤 목표
더 보기
JCC 홍위안 구리, 2억 달러 확장 프로젝트로 2027년까지 생산능력 55만 톤 목표
JCC 홍위안 구리, 2억 달러 확장 프로젝트로 2027년까지 생산능력 55만 톤 목표
장시구리그룹 산하 JCC훙위안구리의 연산 30만 톤 음극동 확장 프로젝트가 9월 4일 환경영향평가 사전 승인 공시 단계에 들어갔으며, 총투자액은 약 14억 1,600만 위안이다. 이 프로젝트는 2026년 9월 착공하여 2027년 12월 완공될 예정이다. 완공 후 JCC훙위안의 총 생산능력은 25만 톤에서 55만 톤으로 확대된다.
2026년 9월 7일 15:43
일본 엔화 상승, USD/JPY 159 아래로 하락 — 개입 추측 속
2026년 9월 3일 19:00
일본 엔화 상승, USD/JPY 159 아래로 하락 — 개입 추측 속
더 보기
일본 엔화 상승, USD/JPY 159 아래로 하락 — 개입 추측 속
일본 엔화 상승, USD/JPY 159 아래로 하락 — 개입 추측 속
[SMM 귀금속 익스프레스] 수요일 거래 중 일본 엔화가 급등하며 달러/엔 환율이 159 아래로 떨어졌고, 0.92% 하락한 158.69에 마감하며 일본의 환율 개입 추측을 불러일으켰다. 달러 인덱스도 급락했으며, 약달러 환경이 귀금속에 지지력을 제공했다.
2026년 9월 3일 19:00