SMM Evening Comments (Jun 13)

게시됨: Jun 13, 2019 18:51
SHFE nonferrous metals fell for the most part on Jun 13

SHANGHAI, Jun 13 (SMM) – SHFE nonferrous metals fell for the most part on Thursday June 13 as copper lost 0.92%, lead dipped 0.46%, zinc declined 0.47%, aluminium eased 0.14%, while nickel expanded 2.13%, and tin rose 0.19%. 

The ferrous complex also ended mostly lower. Coking coal slid more than 1%, coke decreased 0.46%, rebar lost 0.34%, hot-rolled coil went down 0.22%, while iron ore continued to expand 1.56%. 

Copper: A lack of technical support and a buildup of shorts prevented the most-traded SHFE August contract from exceeding 46,480 yuan/mt. It dipped to an intraday low of 46,210 yuan/mt after it tested resistance from the 46,360 yuan/mt level in the afternoon, ending 0.92% lower on the day at 46,270 yuan/mt. As the KDJ indicators expanded downwards and the MACD red line shortened, the contract is expected to test support from 46,000 yuan/mt tonight. 

Aluminium: The SHFE August contract rebounded after it fell below the daily moving average, but pressure from the 60-day moving average stemmed its increase at 13,965 yuan/mt, and lowered it to an intraday low of 13,925 yuan/mt. It lost 0.14% on the day and finished at 13,955 yuan/mt, below the 10-day moving average. As the MACD green line shortened and the KDJ indicators showed signs of rising, the contract is expected to remain above 13,900 yuan/mt tonight. 

Zinc: The most-traded SHFE August contract tested pressure from the 20,400 yuan/mt level twice in early trades, but expanding shorts dragged it to an intraday low of 20,160 yuan/mt before noon. It recovered part of the losses and ended 0.47% lower on the day at 20,285 yuan/mt. The backwardation structure continued to intensify with the spread between the June and August contracts above 1,000 yuan/mt. Tonight, we see the August contract hovering around the 20-day moving average. 

Nickel: A surge of longs pulled the SHFE July contract above the 100,000 yuan/mt level, to an intraday high of 100,120 yuan/mt, right before it closed at 99,950 yuan/mt, up 2.13% on the day. This was probably driven by supply concerns caused by Indonesia floods. Open interests accumulated 8,500 lots to 166,000 lots. An influx of 377 million yuan of capital was seen across all SHFE nickel contracts, topping base metals. As the MACD indicators turned red, we expect it to test support from 100,000 yuan/mt tonight. 

Lead: Growing discounts of secondary refined lead sparked concerns of longs, which covered their positions and lowered the most-traded SHFE July contract to an intraday low of 16,025 yuan/mt. It rebounded a little and closed at 16,065 yuan/mt, down 0.46% on the day, with open interests down 2,224 lots to 43,966 lots. Support from the 16,000 yuan/mt level remained. Tonight, it is expected to consolidate around 16,000 yuan/mt. 

Tin: The most-liquid SHFE September contract extended its upside trend from overnight, as it rebounded from 144,820 yuan/mt, to an intraday high of 145,750 yuan/mt. It retreated and ended at 145,530 yuan/mt, up 0.19% on the day. With support from the five- and 20-day moving averages, the contract is expected to face pressure from 146,000 yuan/mt tonight. 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
2026년 9월 12일 16:51
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
더 보기
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
9월 12일 9시 58분, 잉커우 젠파 성하이 비철금속화공 유한공사 다금속 회수 프로젝트의 화염제련 시스템 핵심 용해로가 성공적으로 점화되어 정식으로 용해로 건조 단계에 진입했으며, 이는 전체 라인 시운전 및 생산을 향한 핵심 단계를 의미한다. 공개 정보에 따르면, 잉커우 젠파 성하이 다금속 복합 금은광 종합 회수 기술 업그레이드 이전 및 확장 프로젝트는 동정광을 주요 원료로 사용하며, 전체 계획 생산능력은 연간 음극동 60만 톤으로 2단계에 걸쳐 건설되며, 단계별 생산능력은 연간 30만 톤이다. 1단계는 연간 음극동 30만 톤, 연간 황산 118만 톤을 생산하도록 설계되었으며, 제련, 전로, 양극 정련, 전해, 슬래그 선광, 귀금속 회수 등의 지원 시스템을 갖추고 있다. 이번 점화 이후, 프로젝트는 전체 시스템에 걸쳐 표준화된 용해로 건조 및 열간 통합 시운전을 수행하여 설비, 계기, 인터록 및 자동 제어 시스템을 검증할 예정이다. 프로젝트는 아직 정식으로 원료 투입 및 생산을 시작하지 않았으며, 용해로 건조 및 시스템 시운전이 완료된 후 1단계 연간 음극동 30만 톤 생산능력의 시운전을 추가로 추진할 것이다. 프로젝트가 성공적으로 가동되면 화북 지역의 동 제련 능력이 증가하고 국내 동정광 원료 수요가 더욱 확대될 것으로 기대된다.
2026년 9월 12일 16:51
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
2026년 9월 11일 17:43
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
더 보기
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
2026년 9월 11일 17:43
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
2026년 9월 11일 16:30
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
더 보기
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
[SMM Flash] Amigo Resources는 탄자니아 선별 시료에 대한 독립 실험실 결과를 발표했으며, 복합 PGM 함량이 6.94~7.07ppm, 잔류 금 함량이 3.27~3.47ppm으로 나타났다고 밝혔다. 회사는 중력 선광 테일링 및 기타 잔류 물질로부터 회수율을 높이기 위해 자체 PGM 정광 기술을 처리 공정에 통합하는 방안을 검토 중이라고 전했다. Amigo는 또한 건식 제련 구리 매트 처리 경로를 평가하고 있으며, 추가 시험을 위해 소형 용광로를 투입했다. 이번 프로그램은 후속 제련 연구에서 경제적 회수 가능성이 입증될 경우, 탄자니아 복합 금속 광물에서 PGM을 회수 가능한 부산물로 확립할 수 있을 것으로 기대된다. 다만 보고된 품위는 선별된 시험 물질 및 처리 연구에 국한된 것으로, 적격 광물자원량, 매장량 또는 상업적 규모의 PGM 생산 증거로 간주될 수 없다. 따라서 보고된 PGM 함량이 경제적으로 회수 가능한 제품 흐름으로 이어질 수 있는지 판단하기 위해서는 추가적인 제련 시험이 중요할 전망이다.
2026년 9월 11일 16:30