SMM Evening Comments (Feb 11)

게시됨: Feb 11, 2019 18:48
SMM Evening Comments

SHANGHAI, Feb 11 (SMM) – SHFE base metals traded mixed on the first trading day after the Chinese New Year break. Lead saw the largest loss of 3.8%, zinc dropped 3.1% and aluminium fell 1.1% while copper nudged up 0.04%, tin rose 1.4% and nickel jumped 2%.

The ferrous complex, except for coking coal, traded higher. Iron ore rose close to 8%, rebar surged 2.4%, hot-rolled coil advanced 2.3% and coke gained 0.8%.

Copper: The SHFE 1903 contract lost most of its gains from a higher open today, and inched up 0.04% to close at 48,190 yuan/mt. It failed to remain above the 60-day moving average and the upper Bollinger band but support was seen at the five- and 40-day moving averages. Post-holiday consumption has yet to kick in as the holiday festivities continued. The contract is expected to try to remain above 48,100 yuan/mt tonight.

Aluminium: The SHFE 1903 contract weakened 1.1% to end at 13,315 yuan/mt today. The buildup of short positions accounted for the decline in SHFE aluminium. It is likely to see further downside room tonight after social inventories of primary aluminium in China substantially expanded over the holiday.

Zinc: Losses in LME zinc and gains in social inventories during the CNY break weighed on zinc prices today, with the SHFE 1903 contract ending 3.1% lower at 21,610 yuan/mt. This forced the contract to give up most gains made in the last week before the holiday. The contract is expected to try to stand firm above 21,500 yuan/mt tonight.

Nickel: A surge in iron ore prices bolstered the SHFE 1905 contract to a high of 101,950 yuan/mt today after a higher open. It then relinquished some gains to finish 2% higher at 100,350 yuan/mt as longs took profits. Potential output growth of nickel pig iron and uncertain consumption of stainless steel after the CNY break kept longs cautious. The contract is expected to try to remain above 100,200 yuan/mt tonight.

Lead: After a negative open, the SHFE 1903 contract lost 3.8% to close at 16,770 yuan/mt today, as shorts aggressively loaded up their bets. Losses in its LME counterpart and gains in social inventories in China over the CNY break accounted for the sharp decline in SHFE lead. The contract is expected to hover around lows tonight.

Tin: The SHFE 1905 contract jumped past the 149,000 yuan/mt and 150,000 yuan/mt levels to close today 1.4% higher at 150,500 yuan/mt. Its strong LME counterpart is expected to keep it at highs in the near term with resistance at 152,000 yuan/mt.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
미량 팔라듐 불순물이 백금 시스템에서 높은 촉매 활성을 유발할 수 있다는 연구 결과
59분 전
미량 팔라듐 불순물이 백금 시스템에서 높은 촉매 활성을 유발할 수 있다는 연구 결과
더 보기
미량 팔라듐 불순물이 백금 시스템에서 높은 촉매 활성을 유발할 수 있다는 연구 결과
미량 팔라듐 불순물이 백금 시스템에서 높은 촉매 활성을 유발할 수 있다는 연구 결과
[SMM 익스프레스] 연구자들은 여러 백금 기반 시스템에서 관찰된 높은 촉매 활성이 백금 자체가 아닌 미량의 팔라듐 불순물에 기인할 수 있음을 확인했으며, 이는 촉매 개발에서 정확한 PGM(백금족 금속) 식별의 중요성을 부각시킨다. 'Pitfalls in Platinum Catalysis..'라는 제목의 연구는 중요한 카르보닐화 반응에 사용되는 백금 촉매를 조사했다. 유도 결합 플라즈마(ICP) 분석과 초순수 백금을 이용한 대조 실험을 통해, 연구자들은 10ppm 수준의 팔라듐 오염만으로도 목표 변환을 유도하기에 충분한 반면, 순수한 백금은 현저히 낮은 촉매 효율을 보인다는 사실을 발견했다. 이번 연구 결과는 이러한 반응에서 백금의 역할에 대한 기존 가정에 의문을 제기하며, 귀금속 촉매를 평가할 때 엄격한 금속 순도 검증이 필요함을 강조한다. 팔라듐 기반 촉매는 높은 활성과 선택성 덕분에 메타크릴레이트 폴리머 응용을 위한 메틸 프로피오네이트 생산을 포함한 산업적 카르보닐화 공정에서 여전히 널리 사용되고 있다. 이 연구가 백금이나 팔라듐 시장 펀더멘털에 즉각적인 변화를 가져오지는 않을 것이다. 그러나 팔라듐의 뛰어난 촉매 능력을 재확인하며 향후 PGM 촉매 최적화 연구에 영향을 미칠 수 있다. 팔라듐 가격 변동성을 고려해 업계가 비용 효율적이고 효과적인 대안을 계속 모색함에 따라, 백금과 팔라듐의 성능에 대한 이해는 장기적인 촉매 선택 전략에 영향을 줄 수 있다.
59분 전
[SMM 귀금속 속보]
1시간 전
[SMM 귀금속 속보]
더 보기
[SMM 귀금속 속보]
[SMM 귀금속 속보]
가장 활발하게 거래된 GFEX 팔라듐 선물 계약인 PD2610은 장중 8% 상승하여 위안/g당 329.65위안에 마감하며 8.51% 올랐다.
1시간 전
퓨처 메탈스, 고품위 백금에 주력하며 판톤 PGM 프로젝트 진전
1시간 전
퓨처 메탈스, 고품위 백금에 주력하며 판톤 PGM 프로젝트 진전
더 보기
퓨처 메탈스, 고품위 백금에 주력하며 판톤 PGM 프로젝트 진전
퓨처 메탈스, 고품위 백금에 주력하며 판톤 PGM 프로젝트 진전
[SMM Express] Future Metals Ltd.는 기존 연구 및 2023년 사업타당성 예비조사에 대한 포괄적 검토를 거쳐 서호주 킴벌리 지역의 팬튼 백금족 금속(PGM) 프로젝트 최적화를 진행하고 있다. 회사는 백금, 팔라듐, 금, 니켈, 크로마이트를 포함한 제련소 순수익(NSR) 산정 방식을 사용해 프로젝트의 광물자원량을 8,230만 톤(g/t당 백금 환산 1.6g)으로 업데이트했으며, 여기에는 백금 환산 기준 424만 온스가 포함된다. 회사는 Panoramic Resources의 인근 서배나 처리 플랜트 활용을 평가하여 사업타당성 예비조사를 업데이트할 계획이며, 이를 통해 새 처리 시설 건설 대비 사전 생산 자본 비용을 약 28% 절감할 수 있다고 밝혔다. Future Metals는 또한 팬튼의 이례적으로 높은 백금 함량을 강조했는데, PGM 바스켓에서 백금이 약 45~50%를 차지해 많은 호주 PGM 프로젝트를 크게 웃도는 수준이다. 팬튼 프로젝트의 최적화는 변화하는 글로벌 공급 행태 속에서 안정적인 서방산 백금족 금속 공급원 개발에 대한 관심 증가를 반영한다. 더 높은 백금 비중, 낮아진 예상 개발 비용, 자동차·산업·수소 응용 분야의 지속적인 수요가 결합되어 글로벌 PGM 시장에서 이 프로젝트의 장기 경쟁력을 강화할 수 있을 것이다.
1시간 전