SMM Evening Comments (Jan 23)

게시됨: Jan 23, 2019 18:29
SMM Evening Comments

SHANGHAI, Jan 23 (SMM) – SHFE nonferrous metals traded mixed on Wednesday. Nickel dropped 1.3%, tin fell 0.9%, copper lost 0.2% and lead declined 0.1% while aluminium gained 0.6% and zinc climbed 0.9%.

The ferrous complex also saw mixed performance. Iron ore slid 0.9%, rebar slipped 0.6% and hot-rolled coil sank 0.3% while coke advanced 0.3% and coking coal rose 1.3%.

Copper: As longs added and shorts cut their positions, the SHFE 1903 contract rebounded to the 47,500 yuan/mt level in early morning trade. This helped it recover some overnight losses. It traded in a tight range of 47,460-47,570 yuan/mt in the rest of the day and finished the trading day 0.2% lower at 47,540 yuan/mt. The contract has closed lower than overnight open for three consecutive days. It is likely to try to hold onto the 47,300 yuan/mt level tonight.

Aluminium: The SHFE 1903 contract climbed during the day and closed at 13,520 yuan/mt. This helped it recover the losses from the previous day and a rebound in its KDJ lines. SHFE alunimium has traded rangebound of late and is expected to test support at the 10-day moving average tonight.

Zinc: As longs loaded up their bets, the SHFE 1903 contract crept to an intra-day high of 21,675 yuan/mt. As some longs took profits, the contract closed at 21,595 yuan/mt, up 0.9% on the day. Continued low inventories and stimulus signals from the central government improved market sentiment and bolstered SHFE zinc. The contract is expected to stay at highs in the near term but with limited upward room. It is likely to trade rangebound around the upper Bollinger band tonight.

Nickel: The SHFE 1905 contract traded rangebound below the daily moving average during the day and failed to pare overnight losses. It ended at 93,670 yuan/mt, down 1.3% on the day. Its KDJ lines expanded downwards with a shorter MACD red bar. The contract is expected to hover around 93,600 yuan/mt tonight.

Lead: Supported by its LME counterpart, the SHFE 1903 contract inched up during the day and ended at 17,555 yuan/mt, up from overnight open but down 0.14% from settlement yesterday. The contract is likely to trade between the 20- and 40-day moving averages tonight.

Tin: The SHFE 1905 contract continued its overnight weak performance during the day and fell below the daily moving average. It finished the trading day 0.9% lower at 147,350 yuan/mt. Support remained at 147,000 yuan/mt.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
16시간 전
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
더 보기
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
9월 12일 9시 58분, 잉커우 젠파 성하이 비철금속화공 유한공사 다금속 회수 프로젝트의 화염제련 시스템 핵심 용해로가 성공적으로 점화되어 정식으로 용해로 건조 단계에 진입했으며, 이는 전체 라인 시운전 및 생산을 향한 핵심 단계를 의미한다. 공개 정보에 따르면, 잉커우 젠파 성하이 다금속 복합 금은광 종합 회수 기술 업그레이드 이전 및 확장 프로젝트는 동정광을 주요 원료로 사용하며, 전체 계획 생산능력은 연간 음극동 60만 톤으로 2단계에 걸쳐 건설되며, 단계별 생산능력은 연간 30만 톤이다. 1단계는 연간 음극동 30만 톤, 연간 황산 118만 톤을 생산하도록 설계되었으며, 제련, 전로, 양극 정련, 전해, 슬래그 선광, 귀금속 회수 등의 지원 시스템을 갖추고 있다. 이번 점화 이후, 프로젝트는 전체 시스템에 걸쳐 표준화된 용해로 건조 및 열간 통합 시운전을 수행하여 설비, 계기, 인터록 및 자동 제어 시스템을 검증할 예정이다. 프로젝트는 아직 정식으로 원료 투입 및 생산을 시작하지 않았으며, 용해로 건조 및 시스템 시운전이 완료된 후 1단계 연간 음극동 30만 톤 생산능력의 시운전을 추가로 추진할 것이다. 프로젝트가 성공적으로 가동되면 화북 지역의 동 제련 능력이 증가하고 국내 동정광 원료 수요가 더욱 확대될 것으로 기대된다.
16시간 전
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
2026년 9월 11일 17:43
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
더 보기
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
2026년 9월 11일 17:43
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
2026년 9월 11일 16:30
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
더 보기
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
[SMM Flash] Amigo Resources는 탄자니아 선별 시료에 대한 독립 실험실 결과를 발표했으며, 복합 PGM 함량이 6.94~7.07ppm, 잔류 금 함량이 3.27~3.47ppm으로 나타났다고 밝혔다. 회사는 중력 선광 테일링 및 기타 잔류 물질로부터 회수율을 높이기 위해 자체 PGM 정광 기술을 처리 공정에 통합하는 방안을 검토 중이라고 전했다. Amigo는 또한 건식 제련 구리 매트 처리 경로를 평가하고 있으며, 추가 시험을 위해 소형 용광로를 투입했다. 이번 프로그램은 후속 제련 연구에서 경제적 회수 가능성이 입증될 경우, 탄자니아 복합 금속 광물에서 PGM을 회수 가능한 부산물로 확립할 수 있을 것으로 기대된다. 다만 보고된 품위는 선별된 시험 물질 및 처리 연구에 국한된 것으로, 적격 광물자원량, 매장량 또는 상업적 규모의 PGM 생산 증거로 간주될 수 없다. 따라서 보고된 PGM 함량이 경제적으로 회수 가능한 제품 흐름으로 이어질 수 있는지 판단하기 위해서는 추가적인 제련 시험이 중요할 전망이다.
2026년 9월 11일 16:30