Oil falls for third day as US inventories hit record high

게시됨: Mar 6, 2017 10:13
Crude oil prices displayed a mixed undertone on Monday on the back of high fulfillment to the OPEC production cut.

By 

ScrapMonster Contributor

SEATTLE (polymers.in):  Crude oil prices end mixed on Monday
- Crude oil prices displayed a mixed undertone on Monday on the back of high fulfillment to the OPEC production cut on the one hand and on rising US crude output on the other.
- WTI crude oil for April, climbed 0.11% to settle at USD 54.05/bbl.
- Dated Brent for April dropped 0.11% to USD 55.93/bbl. 

Oil falls for third day as U.S. inventories hit record high
- WTI futures slipped 12 cents or 0.2% to USD 53.71/bbl.
- Brent crude futures gave up 3 cents to USD 56.33. 

Oil Falls to Three-Week Low as Record U.S. Supply Outweighs OPEC
- Futures declined 2.3% in New York.
- US stockpiles expanded to 520.2 million bbl.
- WTI for April delivery dropped USD 1.22 to USD 52.61/bbl.
- US crude stockpiles rose 1.5 million bbl last week. 

China to issue non-state crude oil import licenses to 5 refiners
- China will issue non-state crude oil import licenses to five refiners, including China National Chemical Corp and four independent refiners. 

Feedstock (Ethane, Ethylene, Propane, Propylene, PX, PTA, MEG, EDC, VCM)
Propylene prices slip in Asia on Monday
- FOB Korea prices of propylene were assessed down at USD 950/MT levels, a tumble of USD 30/MT from last Friday’s assessed levels.
- CFR China prices were lower at USD 990/MT levels, a fall of USD 20/MT on the day.

US Feb ethylene contracts settle up 2.25 cents/lb.
- US ethylene contracts for February have settled for most participants at an increase of 2.25 cents/lb.
- February ethylene contracts have settled at 35.75 cents/lb. up from 33.50 cents/lb. in January.
- Spot prices for front-month ethylene have traded in February at 28.50 - 38 cents/lb.

Polymers Price
Low density polyethylene (LDPE) prices firm up in parts of South Asia
- Sri Lanka, prices of LDPE were assessed up at USD 1280/MT CFR levels, a sharp week on week increase of USD 30/MT.
- In Bangladesh, prices were assessed higher at USD 1300/MT CFR levels, a gain of USD of 30/MT on the week. 

Polypropylene (PP) prices witness a rise in Asia
- CFR Far East Asia prices of PP raffia and PP injection were assessed up at USD 1030/MT levels, a rise of USD 15/MT on the week. PP film prices were assessed higher at USD 1050/MT levels, while BOPP prices were also assessed at USD 1050/MT levels, both up USD 15/MT from the previous week.PP block copolymer prices were assessed higher at USD 1100/MT levels.
- In South East Asia, PP raffia and PP injection prices were assessed up at USD 1080/MT CFR levels, a week on week rise of USD 20/MT. PP film prices were assessed at USD 1100/MT levels, while BOPP prices were also at USD 1100/MT levels, both up USD 20/MT from the previous week. PP block copolymer prices were assessed higher at USD 1130/MT CFR levels, a week on week rise of USD 15/MT. 
- In India, PP raffia and PP injection prices were assessed up at USD 1070/MT CFR levels, a rise of USD 10/MT on the week. PP film prices were assessed at USD 1090/MT CFR levels while BOPP prices were also at USD 1090/MT CFR levels, both up USD 10/MT from the previous week. Pp block copolymer prices were higher at USD 1130/MT CFR levels, a week on week increase of USD 10/MT. 

PE, PP, PVC prices on the rise
- Prices for all grades of PE are up an average of 5 cents per pound, while PP prices have climbed 6.5 cents and PVC prices have increased 4 cents.
- North American PP prices jumped 6.5 cents in February, following an increase for PGP feedstock. 

Russian PVC prices up by Rb2,000/MT in March
- Russian PVC producers have firmly insisted on the price rise form the beginning of the year and expectedly announced an increase of Rb 500 - 2,000/MT for March delivery.

Polymers Supply
LDPE plant likely to be shut by Jilin Petrochemical
- Jilin Petrochemical is in plans to take a LDPE plant off-stream for a maintenance turnaround and is expected to remain shut for around fifteen days.
- Jilin is located in Jilin, China and has a production capacity of 275,000 MT/year. 

LDPE plant to be shut for maintenance by PTTGC
- PTTGC is likely to be taken off-stream its LDPE plant in March 22 and is likely to remain shut for around 2 weeks.
- PTTGC is located at Map Ta Phut, in Thailand and has a production capacity of 300,000 MT/year.

Courtesy: www.polymers.io

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
2026년 9월 12일 16:51
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
더 보기
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
잉커우 젠파 성하이 1기 연 30만 톤 동정련 프로젝트 제련로 가동 개시, 건식제련 시스템 로 건조 단계 돌입
9월 12일 9시 58분, 잉커우 젠파 성하이 비철금속화공 유한공사 다금속 회수 프로젝트의 화염제련 시스템 핵심 용해로가 성공적으로 점화되어 정식으로 용해로 건조 단계에 진입했으며, 이는 전체 라인 시운전 및 생산을 향한 핵심 단계를 의미한다. 공개 정보에 따르면, 잉커우 젠파 성하이 다금속 복합 금은광 종합 회수 기술 업그레이드 이전 및 확장 프로젝트는 동정광을 주요 원료로 사용하며, 전체 계획 생산능력은 연간 음극동 60만 톤으로 2단계에 걸쳐 건설되며, 단계별 생산능력은 연간 30만 톤이다. 1단계는 연간 음극동 30만 톤, 연간 황산 118만 톤을 생산하도록 설계되었으며, 제련, 전로, 양극 정련, 전해, 슬래그 선광, 귀금속 회수 등의 지원 시스템을 갖추고 있다. 이번 점화 이후, 프로젝트는 전체 시스템에 걸쳐 표준화된 용해로 건조 및 열간 통합 시운전을 수행하여 설비, 계기, 인터록 및 자동 제어 시스템을 검증할 예정이다. 프로젝트는 아직 정식으로 원료 투입 및 생산을 시작하지 않았으며, 용해로 건조 및 시스템 시운전이 완료된 후 1단계 연간 음극동 30만 톤 생산능력의 시운전을 추가로 추진할 것이다. 프로젝트가 성공적으로 가동되면 화북 지역의 동 제련 능력이 증가하고 국내 동정광 원료 수요가 더욱 확대될 것으로 기대된다.
2026년 9월 12일 16:51
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
2026년 9월 11일 17:43
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
더 보기
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
귀금속, 매크로 주요 검증 구간 진입하며 박스권 유지 [SMM 귀금속 매크로 분석]
2026년 9월 11일 17:43
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
2026년 9월 11일 16:30
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
더 보기
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
아미고 리소스, 탄자니아 가공 시험에서 최대 7.07ppm의 PGM 함량 보고
[SMM Flash] Amigo Resources는 탄자니아 선별 시료에 대한 독립 실험실 결과를 발표했으며, 복합 PGM 함량이 6.94~7.07ppm, 잔류 금 함량이 3.27~3.47ppm으로 나타났다고 밝혔다. 회사는 중력 선광 테일링 및 기타 잔류 물질로부터 회수율을 높이기 위해 자체 PGM 정광 기술을 처리 공정에 통합하는 방안을 검토 중이라고 전했다. Amigo는 또한 건식 제련 구리 매트 처리 경로를 평가하고 있으며, 추가 시험을 위해 소형 용광로를 투입했다. 이번 프로그램은 후속 제련 연구에서 경제적 회수 가능성이 입증될 경우, 탄자니아 복합 금속 광물에서 PGM을 회수 가능한 부산물로 확립할 수 있을 것으로 기대된다. 다만 보고된 품위는 선별된 시험 물질 및 처리 연구에 국한된 것으로, 적격 광물자원량, 매장량 또는 상업적 규모의 PGM 생산 증거로 간주될 수 없다. 따라서 보고된 PGM 함량이 경제적으로 회수 가능한 제품 흐름으로 이어질 수 있는지 판단하기 위해서는 추가적인 제련 시험이 중요할 전망이다.
2026년 9월 11일 16:30
Oil falls for third day as US inventories hit record high - Shanghai Metals Market (SMM)