Global Steel Associations Condemn Overproduction

게시됨: May 25, 2016 08:55 (GMT+8)
​Global steel trade associations today released a statement urging the leaders of the G7 nations to take steps to address the current global steel overcapacity situation.
  • May 24, 2016

Global steel trade associations today released a statement urging the leaders of the G7 nations to take steps to address the current global steel overcapacity situation which is negatively affecting economies, industries and workers around the world.

The American Iron and Steel Institute, the Japan Iron and Steel Federation,Eurofer (the European Steel Association), Canadian Steel Producers Association,UK Steel, the German Steel Federation (WV-Stahl), Alliance des Minerais, Minéraux et Métaux (A3M), Federacciai (the Federation of the Italian Steel Companies), the Steel Manufacturers Association (SMA), the Committee on Pipe and Tube Imports (CPTI), the Specialty Steel Industry of North America (SSINA), and the European Steel Tube Association said:

“Government support measures and other policies have contributed to significant global excess capacity in steel, unfair trade and distortions in steel trade flows around the world. Among other things, these market-distorting government policies have prevented adequate industry adjustment in some markets in response to changes in global demand. This is an issue of concern in countries where government policies encourage steel capacity growth without regard to market signals, or where government actions sustain uneconomic or consistently loss-making steel plants that otherwise would exit the market.

“Steel producers in the G7 nations, and elsewhere around the world, highly appreciate intergovernmental attempts so far to cope with the global overcapacity issue, and urge their governments to take urgent action to address this global problem, building upon the work program outlined by high-level government representatives in Brussels in mid-April to address the overcapacity and adjustment challenges facing the steel industry,” the statement, in part, read.

“It is critical that all major steel-producing nations participate in efforts to eliminate trade-distorting policies that are contributing to the current steel crisis,” it continued. “Otherwise, as was noted at the OECD Steel Committee meeting in May 2015, ‘a failure to address or halt market distortions will result in subsidized and state-supported enterprises surviving at the expense of efficient companies operating in environments with minimal government support.’

“In this regard, we urge the G7 summit in Japan to discuss the need to maintain effective remedial measures, consistent with their WTO rights and obligations, against exports from countries in which market economy conditions do not prevail.”


데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[구글 양자 컴퓨팅, 새로운 돌파구 마련: 윌로우 칩, 오류율 약 40배 감소]
3시간 전
[구글 양자 컴퓨팅, 새로운 돌파구 마련: 윌로우 칩, 오류율 약 40배 감소]
더 보기
[구글 양자 컴퓨팅, 새로운 돌파구 마련: 윌로우 칩, 오류율 약 40배 감소]
[구글 양자 컴퓨팅, 새로운 돌파구 마련: 윌로우 칩, 오류율 약 40배 감소]
알파벳의 구글(GOOG.O)은 10월 15일 자사 퀀텀 AI 팀이 윌로우 양자 칩에서 '매직 스테이트 증류'라는 새로운 기술을 검증하는 데 성공했으며, 특정 양자 상태의 오류율을 약 40배 낮춰 99.99%의 양자 상태 준비 정확도를 달성했다고 발표했다. 관련 연구 결과는 학술지 사이언스에 게재됐다. 구글은 양자 컴퓨터가 오류를 유발하는 간섭에 취약하며, 복잡한 연산을 수행하려면 특수한 양자 상태를 사전에 준비해야 하는데 이 과정에 많은 자원이 소모된다고 설명했다. 일부 연구에 따르면 기존 방식은 양자 컴퓨터 연산 능력의 최대 95%를 소모할 수 있다. 새로운 기술은 오류가 있는 양자 상태를 감지하고 폐기하는 방식으로 준비 효율을 높이며, 향후 양자 컴퓨터의 오류 정정에 필요한 자원 소모를 줄일 수 있을 것으로 기대된다. 구글은 이번 성과가 실용적인 양자 컴퓨팅으로 나아가는 중요한 진전이지만, 더 큰 규모의 양자 컴퓨팅 시스템에 적용할 수 있는지 추가 검증이 필요하다고 밝혔다.
3시간 전
상하이선물거래소(SHFE) 주석 SN2611 최다거래 종목이 야간장에서 다소 회복했으며, 현물 시장의 관망세가 짙다 [SMM 주석 모닝 미팅 요약]
4시간 전
상하이선물거래소(SHFE) 주석 SN2611 최다거래 종목이 야간장에서 다소 회복했으며, 현물 시장의 관망세가 짙다 [SMM 주석 모닝 미팅 요약]
더 보기
상하이선물거래소(SHFE) 주석 SN2611 최다거래 종목이 야간장에서 다소 회복했으며, 현물 시장의 관망세가 짙다 [SMM 주석 모닝 미팅 요약]
상하이선물거래소(SHFE) 주석 SN2611 최다거래 종목이 야간장에서 다소 회복했으며, 현물 시장의 관망세가 짙다 [SMM 주석 모닝 미팅 요약]
[SMM 주석 조간 회의 요약: 야간장에서 상하이 주석 SN2611 최다거래 종목이 다소 회복되었으며, 현물 시장 관망세가 짙음]
4시간 전
[중국 EUV 광원 프로토타입, 국산화율 90% 달성; 양산까지는 아직 3~5년]
18시간 전
[중국 EUV 광원 프로토타입, 국산화율 90% 달성; 양산까지는 아직 3~5년]
더 보기
[중국 EUV 광원 프로토타입, 국산화율 90% 달성; 양산까지는 아직 3~5년]
[중국 EUV 광원 프로토타입, 국산화율 90% 달성; 양산까지는 아직 3~5년]
제26회 중국국제공업박람회가 국가전시컨벤션센터에서 열리고 있으며, 혁신과학기술관에는 100여 개의 상하이 과학기술 성과가 전시되어 있다. 란다오쑤이옌 부스에서는 EUV 광원 시스템 시제품이 이번 박람회에서 처음 공개되었다. 이는 현재 공개 전시된 국내 자체 개발 EUV 광원 시제품 중 가장 앞선 것으로, 고급 노광기의 '심장'으로도 불린다. EUV 광원은 7nm 이하 첨단 공정 칩 제조의 3대 핵심 부품 중 하나로, 오랫동안 중국 외 지역의 기술 독점과 금수 조치를 받아 왔으며, 중국의 고급 칩 자주 통제를 제약하는 핵심 고리였다. 현장 직원은 전시된 광원 시스템이 90% 국산화를 달성했으며, 대부분의 핵심 부품이 자체 연구개발을 통해 이루어졌다고 소개했다. 기술 노선은 국제 선두 업체와 일치하며, 칩 노광 테스트에 사용할 수 있다. 양산까지는 아직 3~5년이 걸리지만, 이번 돌파는 중국 EUV 광원이 실험실에서 산업화로 나아가는 중요한 한 걸음을 의미한다.
18시간 전