Lithium iron phosphate 4C competition begins

Telah Terbit: Feb 29, 2024 19:27
Sumber: SMM
In recent years, many cell makers have released 4C fast charging products for LFP batteries, which are used in the field of EV. This move will help quickly increase the market share of LFP batteries in the power sector, and also accelerate the penetration of EVs.

In recent years, many cell makers have released 4C fast charging products for LFP batteries, which are used in the field of EV. This move will help quickly increase the market share of LFP batteries in the power sector, and also accelerate the penetration of EVs.

1. LFP battery with 4C fast charging is installed in the car: charging for 10 minutes and driving 800 miles will enter public life.

In 2024, lithium iron phosphate battery 4C fast charging landed on the car, equipped with Chery Starway Star Era ET new energy vehicles, Geely Krypton's new car Krypton 001 can be equipped with Shenxing 5C fast charging battery. Prior to this, in October 2023, CATL released "10 minutes of charging, range of 400 kilometers" fast-charging battery, at that time, there are a number of car companies expressed the intention to cooperate, including Avita, Chery and other car companies.

God line super charging battery winter test results show that in the minus 20 ℃ environment, equipped with God line super charging battery Star Era ET only 24 minutes, can be done to charge the battery from 20% of the power to 80%. The Extreme Kryptonite 001 Godbound battery has a 5C fast charging capability, and can be charged from 10% to 80% in just 11.5 minutes on the V3 Extreme Charging Pile.

2024 enterprise lithium iron phosphate 4C or even 5C fast charging information situation:

On February 20, 2024, CATL announced that Shenxing Superfast Charging Battery 4C battery mass production loaded, the world's first ride landed in chery's starway star epoch ET. 4C represents 15 minutes can be fully powered.

On February 23, 2024, Sunwoda said that the company has completed the development of 4C lithium iron phosphate batteries, followed by a product launch, it is reported that the energy density of the electric core can reach 235Wh/kg.

The race for fast charging and supercharging has also become a consensus at the end of car companies. Recently, Huawei held a conference on the top ten trends in the charging network industry in 2024. Huawei said that electric vehicles are accelerating towards high-voltage supercharging, "It is expected that by 2028, the proportion of high-voltage supercharging models will exceed 60%. Comprehensive supercharging is one of the top ten trends for the future development of the charging industry."

On February 27, 2024, the new Geely Zeekr New Energy Vehicle was released, and the new Zeekr 001 Shenxing battery has a 5C fast-charging capability, which can be charged from 10% to 80% in just 11.5 minutes on the V3 Extreme Charging Pile. Zeekr 's goal: to accumulate 1,000 extreme charging stations by 2024 and 10,000 extreme charging piles by 2026. At the same time, Zeekr also released the world's highest single-gun power output charging pile, V3, which is an 8C charging pile. Extreme Charge V2: 800V platform models can be charged from 10% to 80% of SoC in as fast as 15 minutes when using Extreme Charge V2 and above charging piles.


2. Fast charging market map

The development of ternary battery 4C fast charging market is better than lithium iron phosphate battery 4C fast charging. But since lithium iron phosphate material is more cost friendly and safe, its battery 4C fast-charging market, product development, mass production and mounted on the car is also breaking through constantly.


3. Problems: big market and big challenges, 4C fast charging battery power charging station to be improved.

Problems to be solved: the construction of charging stations, which is currently the main obstacle restricting the development of the fast-charging market.

Voltage requirements: 800V high voltage.


At present, enterprises led by Huawei and Geely are laying out super-charging networks in major areas of the country, and gradually expanding under the auspices of technology iteration and capital. However, the investment cost is very high, of which the charging module is one of the core components of the charging pile, which accounts for 40%-50% of the cost of the whole pile of the charging pile.


4. Market forecast: LMFP competition or weaken, LFP battery 4C fast charging proportion to increase.

4C or 5C or even (4 + N) C market demand is large, its popularity is greatly affected by the four main materials especially the anode material. 2024 is the first year of LFP 4C fast-charging batteries installed in the car, the future demand for the annual compound growth rate of more than 50%.

Below if the demand forecast for fast-charging LFP fast-charging materials in 10k tons:

For more information, please contact cathycai@smm.cn


Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
[SMM Analysis ] Zimbabwe's H1 Lithium Export Value Surges 230%; Local Processing Policy Accelerates Industry Upgrade
11 menit yang lalu
[SMM Analysis ] Zimbabwe's H1 Lithium Export Value Surges 230%; Local Processing Policy Accelerates Industry Upgrade
Baca Selengkapnya
[SMM Analysis ] Zimbabwe's H1 Lithium Export Value Surges 230%; Local Processing Policy Accelerates Industry Upgrade
[SMM Analysis ] Zimbabwe's H1 Lithium Export Value Surges 230%; Local Processing Policy Accelerates Industry Upgrade
11 menit yang lalu
【Analisis SMM】MIIT Mengakhiri Persyaratan Pengumuman untuk Baterai Bekas Pakai, Memperketat Aturan Daur Ulang
32 menit yang lalu
【Analisis SMM】MIIT Mengakhiri Persyaratan Pengumuman untuk Baterai Bekas Pakai, Memperketat Aturan Daur Ulang
Baca Selengkapnya
【Analisis SMM】MIIT Mengakhiri Persyaratan Pengumuman untuk Baterai Bekas Pakai, Memperketat Aturan Daur Ulang
【Analisis SMM】MIIT Mengakhiri Persyaratan Pengumuman untuk Baterai Bekas Pakai, Memperketat Aturan Daur Ulang
Pada 30 Juli 2026, Kementerian Perindustrian dan Teknologi Informasi (MIIT) menerbitkan pengumuman yang menghapus ketentuan pemanfaatan sekunder dalam Persyaratan Standar Industri untuk Pemanfaatan Komprehensif Baterai Bekas Kendaraan Energi Baru (Edisi 2024). MIIT tidak akan lagi melakukan manajemen pengumuman bagi produsen baterai sekunder, dan seluruh produsen tersebut yang sebelumnya tercantum dalam daftar pengumuman dihapus.
32 menit yang lalu
Baterai Solid-State CATL: Dari TRL-4 ke Produksi Skala Kecil pada 2027? [Analisis SMM]
53 menit yang lalu
Baterai Solid-State CATL: Dari TRL-4 ke Produksi Skala Kecil pada 2027? [Analisis SMM]
Baca Selengkapnya
Baterai Solid-State CATL: Dari TRL-4 ke Produksi Skala Kecil pada 2027? [Analisis SMM]
Baterai Solid-State CATL: Dari TRL-4 ke Produksi Skala Kecil pada 2027? [Analisis SMM]
[Analisis SMM: Baterai Solid-State Penuh CATL – Dari TRL-4 ke Produksi Batch Kecil pada 2027?] Pada Forum Davos bulan Juni 2026, Zeng Yuqun menilai bahwa baterai solid-state penuh saat ini hanya berada di Level 4 berdasarkan TRL (Technology Readiness Level 1-9). Pada 29 Juli, sebuah balasan di Hudongyi menyatakan, “Produksi batch kecil diharapkan pada tahun 2027.” Kedua pernyataan tersebut, yang disampaikan hanya berselang 36 hari, diinterpretasikan oleh pasar sebagai “koreksi diri”, tetapi sebenarnya keduanya menggunakan kerangka evaluasi yang berbeda: yang pertama berpatokan pada kematangan teknologi (TRL), sementara yang kedua pada target kesiapan manufaktur (MRL 7-8). Dengan mempertimbangkan target publik sebelumnya dari kepala ilmuwan Wu Kai untuk mencapai level 7-8 pada tahun 2027, laju jalur percontohan Yibin 2 GWh milik CATL, dan pemantauan rantai industri oleh SMM, uji coba produksi batch kecil pada tahun 2027 tidak bertentangan dengan pandangan bahwa “sulit untuk memasang baterai pada jutaan kendaraan sebelum tahun 2030.” Industrialisasi baterai solid-state penuh masih dalam tahap transisi dari “verifikasi percontohan ke produksi demonstrasi.” Konsensus industri tentang jadwal waktu ini tetap dipertahankan: baterai semi-solid-state (liquid-solid) akan dipasang di kendaraan pada tahun 2026, produksi batch kecil baterai solid-state penuh pada tahun 2027, dan adopsi komersial skala besar setelah tahun 2030.
53 menit yang lalu
Lithium iron phosphate 4C competition begins - Shanghai Metals Market (SMM)