Macro Roundup (May 21)

Telah Terbit: May 21, 2020 08:59
With efforts to develop a vaccine and the prospects for economic recovery in focus, US stocks resumed its rally on Wednesday, oil prices continued their ascent, while the US dollar extended its decline against a basket of its peers.

SHANGHAI, May 21 (SMM) – This is a roundup of global macroeconomic news last night and what is expected in the day ahead.

 

With efforts to develop a vaccine and the prospects for economic recovery in focus, US stocks resumed its rally on Wednesday, oil prices continued their ascent, while the US dollar extended its decline against a basket of its peers.

 

The US dollar index rose slightly on Thursday morning, after touching its lowest since May 1 at 99.0014 overnight, while oil prices were mixed in the morning of Asian hours.

 

LME base metals ticked lower for the most part on Thursday morning, following broad gains in the previous session. On Wednesday, nonferrous metals on the LME rose across the board, with nickel and aluminium both advancing about 1.8% to lead the way up. Copper jumped 1.7%, zinc and lead rose 0.8% and tin gained 0.3%.

 

On the SHFE, those metals, except for zinc, also firmed in overnight trading. Nickel surged 2.2% to be the best performer, copper climbed 1.5%, tin rose 0.9%, lead and aluminium both gained about 0.7%, while zinc fell close to 0.7%.

 

China's "two sessions," a key event in the country's political calendar, will open on Thursday afternoon, after being postponed by two months due to COVID-19. The world will watch how China charts the course for a crucial year to build a moderately prosperous society in all respects and achieve its development goals, while effectively warding off coronavirus risks.

 

On Wednesday, China held its benchmark lending rate steady. The one-year loan prime rate (LPR) remained at 3.85% from last month's fixing, while the five-year LPR was also kept at 4.65%, largely in line with expectations.

 

On the data front, the UK’s consumer price index plunged to just 0.8% year-on-year in April, down from 1.5% annually in March, according to the Office for National Statistics.

 

European statistics agency Eurostat confirmed Wednesday that eurozone April inflation was revised down to 0.3% from an initial estimate of 0.4%, bringing annual inflation to its lowest level since August 2016.

 

The US Energy Information Administration (EIA) reported Wednesday that for the week ending May 15, US crude inventories dropped by 5 million barrels, compared to an expected build of 1.8 million barrels.

For the same week, the American Petroleum Institute (API) reported Tuesday a fall of 4.8 million barrels in US crude inventories. Refinery runs rose by 229,000 barrels per day, the API said, indicating plants are trying to produce more fuel as the US eases its lockdowns.

 

The US Department of Labor is scheduled to release the latest update to initial jobless claims at 8:30 a.m. ET Thursday morning. Though economists polled by Dow Jones expect the government to announce yet another deceleration in the pace of claims, the consensus estimate predicts another 2.4 million Americans filed for insurance during the week ended May 16.

 

Last week, the Labor Department reported another 2.9 million Americans had filed claims in the week ended May 9, which brought the coronavirus crisis total to nearly 36.5 million, by far the largest loss in US history.

 

US preliminary manufacturing purchasing managers’ index (PMI) for May and existing home sales for April are also due Thursday.

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
Proyek Katoda Tembaga 300.000 mt Yingkou Jianfa Shenghai Tahap I Tungku Peleburan Mulai Berproduksi, Sistem Pirometalurgi Memasuki Tahap Pengeringan Tungku
12 Sep 2026 16:51
Proyek Katoda Tembaga 300.000 mt Yingkou Jianfa Shenghai Tahap I Tungku Peleburan Mulai Berproduksi, Sistem Pirometalurgi Memasuki Tahap Pengeringan Tungku
Baca Selengkapnya
Proyek Katoda Tembaga 300.000 mt Yingkou Jianfa Shenghai Tahap I Tungku Peleburan Mulai Berproduksi, Sistem Pirometalurgi Memasuki Tahap Pengeringan Tungku
Proyek Katoda Tembaga 300.000 mt Yingkou Jianfa Shenghai Tahap I Tungku Peleburan Mulai Berproduksi, Sistem Pirometalurgi Memasuki Tahap Pengeringan Tungku
Pada 12 September pukul 9:58, tungku peleburan inti sistem pirometalurgi di proyek pemulihan multi-logam Yingkou Jianfa Shenghai Nonferrous Metals & Chemicals Co., Ltd. berhasil dinyalakan, secara resmi memasuki tahap pengeringan tungku dan menandai langkah kunci menuju commissioning dan produksi seluruh lini. Informasi publik menunjukkan bahwa proyek peningkatan teknologi pemulihan komprehensif bijih emas-perak polimetalik kompleks, relokasi, dan perluasan Yingkou Jianfa Shenghai menggunakan konsentrat tembaga sebagai bahan baku utama, dengan kapasitas terencana keseluruhan 600.000 ton/tahun katoda tembaga yang akan dibangun dalam dua fase, dengan kapasitas 300.000 ton/tahun per fase. Fase I dirancang untuk memproduksi 300.000 ton/tahun katoda tembaga dan 1,18 juta ton/tahun asam sulfat, beserta sistem pendukung untuk peleburan, konversi, pemurnian anoda, elektrolisis, benefisiasi terak, dan pemulihan logam mulia. Setelah penyalaan ini, proyek akan melaksanakan pengeringan tungku terstandarisasi dan uji coba terpadu kondisi panas di seluruh sistem untuk memverifikasi peralatan, instrumen, interlock, dan sistem kontrol otomatis. Proyek ini belum secara resmi memulai pengumpanan bahan baku dan produksi; setelah pengeringan tungku dan commissioning sistem selesai, akan dilanjutkan dengan commissioning kapasitas katoda tembaga 300.000 ton/tahun Fase I. Jika proyek berhasil mulai berproduksi, diharapkan dapat meningkatkan kapasitas peleburan tembaga di Tiongkok Utara dan semakin mendorong permintaan domestik akan bahan baku konsentrat tembaga.
12 Sep 2026 16:51
Logam Mulia Tetap Bergerak dalam Kisaran saat Makro Memasuki Jendela Validasi Kunci [Analisis Makro Logam Mulia SMM]
11 Sep 2026 17:43
Logam Mulia Tetap Bergerak dalam Kisaran saat Makro Memasuki Jendela Validasi Kunci [Analisis Makro Logam Mulia SMM]
Baca Selengkapnya
Logam Mulia Tetap Bergerak dalam Kisaran saat Makro Memasuki Jendela Validasi Kunci [Analisis Makro Logam Mulia SMM]
Logam Mulia Tetap Bergerak dalam Kisaran saat Makro Memasuki Jendela Validasi Kunci [Analisis Makro Logam Mulia SMM]
11 Sep 2026 17:43
Amigo Resources Melaporkan Nilai PGM hingga 7,07 ppm dalam Uji Pengolahan di Tanzania
11 Sep 2026 16:30
Amigo Resources Melaporkan Nilai PGM hingga 7,07 ppm dalam Uji Pengolahan di Tanzania
Baca Selengkapnya
Amigo Resources Melaporkan Nilai PGM hingga 7,07 ppm dalam Uji Pengolahan di Tanzania
Amigo Resources Melaporkan Nilai PGM hingga 7,07 ppm dalam Uji Pengolahan di Tanzania
[SMM Flash] Amigo Resources melaporkan hasil laboratorium independen dari material terpilih asal Tanzania yang menunjukkan nilai gabungan PGM sebesar 6,94–7,07 ppm, bersama dengan nilai emas residu sebesar 3,27–3,47 ppm. Perusahaan menyatakan sedang mengkaji integrasi teknologi konsentrasi PGM miliknya ke dalam diagram alir pemrosesan untuk menargetkan perolehan dari tailing gravitasi dan material residu lainnya. Amigo juga sedang mengevaluasi rute perlakuan pirometalurgi copper-matte dan telah mengerahkan tungku skala kecil untuk pengujian lebih lanjut. Program ini berpotensi menetapkan PGM sebagai produk sampingan yang dapat diperoleh kembali dari material polimetalik Tanzania milik Amigo jika pekerjaan metalurgi selanjutnya menunjukkan perolehan yang layak. Namun, kadar yang dilaporkan berkaitan dengan material uji terpilih dan studi pemrosesan, serta bukan merupakan Sumber Daya Mineral, cadangan, atau bukti produksi PGM skala komersial yang sesuai standar. Oleh karena itu, pengujian metalurgi lebih lanjut akan menjadi penting untuk menentukan apakah kandungan PGM yang dilaporkan dapat diubah menjadi aliran produk yang dapat diperoleh kembali secara ekonomis.
11 Sep 2026 16:30
Macro Roundup (May 21) - Shanghai Metals Market (SMM)