The epidemic situation has improved, major European car factories have resumed production, and the resumption time for most factories in the United States has not yet been determined.

Telah Terbit: May 08, 2020 15:41 (GMT+8)

SMM5, March 8: due to the unprecedented impact on the global auto industry due to the new crown epidemic, various countries have experienced varying degrees of shutdown of automobile factories, benefiting from China's rapid and effective epidemic control measures. According to information from the Ministry of Industry and Information Technology, as early March, the reinstatement rate of major domestic automakers has reached 90%, and the employee reinstatement rate has reached 70%.

Due to the lack of timely prevention and control of the epidemic in foreign countries, coupled with loose measures, the number of virus infections in Europe and the United States has soared in a short period of time, indirectly affecting the production of automobiles. Most of the world's large automakers are developed countries such as Europe, the United States, Japan and South Korea. Compared with China, foreign car factories have been hit even harder. At one point, more than 150 factories around the world were temporarily closed in April.

As the epidemic prevention and control in European countries achieved phased results, epidemic prevention measures have been gradually relaxed, and some car factories resumed production in April.

On April 20, with the resumption of work at Volkswagen's Zweicao factory, it has gradually opened the curtain on the resumption of work at the European car factory, and the Zweicao factory will also have Volkswagen's new pure electric cars off the line, marking the beginning of a new era for Volkswagen. But production capacity is much lower than normal, producing 50 vehicles a day, 1/3 of what it was before the shutdown. Delivery of the model is scheduled to begin this summer.

Earlier, the president of the Volkswagen union said it was a very clear signal for the industry as a whole to restart. Car factories that have been shut down since March will resume work one after another as the number of new confirmed cases of pneumonia in Europe and the United States slows down.

According to data released by the Robert Koch Institute of the German Agency for Disease Control and Prevention on the 6th, as of 00:00 on the same day, Germany had 947 new confirmed cases, a total of 164807 confirmed cases, 165 new deaths, 6996 cumulative deaths, and 2300 new cured cases, with a cumulative cure of 137400 cases. At the same time, the German federal government and state governments reached a new agreement on the 6th to further relax restrictions to deal with the new crown epidemic, but retain the provisions on maintaining social distance and wearing masks.

Several factories under German brands were reopened in April as a result of relaxed epidemic prevention measures. Volkswagen's Bratislava plant in Slovakia also reopened on April 20, the Wolfsburg plant was reopened on April 27, and Volkswagen's main factories in Europe have largely resumed production.

Daimler, the parent company of Mercedes-Benz, has allowed powertrain plants in Stuttgart and Berlin to take the lead in resuming production since April 20. As of April 30, major German factories, including the Sindfengen general plant and the Bremen plant, had resumed work.

BMW had previously announced in early April that it would extend the shutdown period to April 30. BMW's Dingfen plant in Bavaria is expected to resume work on May 11, while BMW's most important production sites, including the Munich plant, the Leipzig plant and the mini-plant in Oxford, UK, will gradually resume production after May 18.

French car company Renault restarted production plans at its Forlan plant on April 27th. The factory's main model is the electric car Zoe, which beat Tesla Model 3 to become the top seller of electric cars in 2019 with a subsidy of less than 19000 euros. Renault's Dacia brand is as early as April 21 to facilitate a full resumption of work in Romania.

On May 7, local time, the cumulative number of confirmed cases of New Crown pneumonia in the United States was the largest in the world, with more than 1.29 million cases, reaching 1291222 cases, and more than 76000 cases of death, reaching 76894 cases. It is reported that with the Trump White House administration blindly adhering to the policy of reviving the economy, the whole society of the United States is gradually resuming the policy of social blockade, and US university experts predict that the number of people infected with the new crown pneumonia in the United States will continue to rise. In addition, New York Governor Cuomo also said that Trump's full recovery of the economy, and even the lifting of the ban on wearing masks, will pose a greater epidemic challenge for the United States.

After some efforts in Europe, some car factories finally returned to work, but the epidemic in the United States is still serious. according to relevant reports, since General Motors, Ford, Fiat Chrysler and other car companies in the United States stopped production in March, they are striving for a partial resumption of production on May 18. The automakers set out to work with the United Auto Workers Union to develop a set of safety rules to prevent the epidemic, but details have not yet been worked out.

SMM-- China Tungsten Industry Market and Application Summit Forum

Seminar on the Application of cemented Carbide Market in China

On July 8, Zhuzhou, China cordially invites you to discuss the great plans of the industry.

Scan the code to sign up for this meeting

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
Aterian melaporkan penjualan bijih 3T Rwanda yang lebih tinggi; margin perdagangan masih berupa estimasi
02 Oct 2026 16:26 (GMT+8)
Aterian melaporkan penjualan bijih 3T Rwanda yang lebih tinggi; margin perdagangan masih berupa estimasi
Baca Selengkapnya
Aterian melaporkan penjualan bijih 3T Rwanda yang lebih tinggi; margin perdagangan masih berupa estimasi
Aterian melaporkan penjualan bijih 3T Rwanda yang lebih tinggi; margin perdagangan masih berupa estimasi
[SMM Kilas Tantalum] Hasil sementara Aterian, yang dirilis pada 30 September, menunjukkan pendapatan penjualan bijih Tantalum dan bijih lainnya sebesar £1,341 juta untuk enam bulan hingga 30 Juni 2026, naik dari £20.000 pada tahun sebelumnya. Laba kotor sebesar £522.000, sementara grup mencatat rugi sebelum pajak sebesar £568.000. Bisnis perdagangannya di Rwanda menggelontorkan modal kerja sekitar US$2,18 juta melalui pembelian usaha patungan. Manajemen menilai potensi penjualan dari pembelian tersebut sebesar US$2,78 juta, tetapi mengingatkan bahwa penilaian nosional tersebut bukan merupakan pendapatan yang diakui tambahan. Laba perdagangan kotor tersirat sebesar US$602.000 juga merupakan estimasi manajemen, bergantung pada penyelesaian penjualan, pengujian kadar, harga realisasi, biaya, dan alokasi laba usaha patungan. Aterian menyatakan bahwa inspeksi ketertelusuran membatasi pemasok dan volume. Perusahaan memiliki kas sebesar £131.000 pada 30 Juni; ekspektasinya untuk memperluas volume perdagangan mulai kuartal keempat masih bergantung pada eksekusi dan pendanaan.
02 Oct 2026 16:26 (GMT+8)
Titik sampel Malawi Tusker menunjukkan dominasi ilmenit
02 Oct 2026 16:23 (GMT+8)
Titik sampel Malawi Tusker menunjukkan dominasi ilmenit
Baca Selengkapnya
Titik sampel Malawi Tusker menunjukkan dominasi ilmenit
Titik sampel Malawi Tusker menunjukkan dominasi ilmenit
[SMM Titanium Flash] Tusker Minerals melaporkan pada 30 September bahwa pengambilan sampel lanjutan di proyek Mzimba di Malawi utara telah mengubah interpretasi geologisnya. Titanium magnetik melampaui ekuivalen rutil yang dihitung pada 112 dari 149 sampel tanah regional, menunjukkan sistem yang didominasi ilmenit dengan rutil terlokalisasi. Tiga puluh tiga sampel saluran lubang dangkal tidak menunjukkan rutil kadar tinggi yang bertahan seiring kedalaman. Tusker menyatakan hasil tersebut tidak mendukung program pengeboran yang berfokus pada rutil secara langsung pada anomali Fase 1. Hasil ini melemahkan kasus eksplorasi rutil premium spesifik yang sebelumnya disarankan oleh sampel terpilih. Hasil ini tidak menetapkan sumber daya mineral atau menunjukkan bahwa ilmenit dapat ditambang secara menguntungkan. Tusker akan menilai kembali model geologisnya sebelum memutuskan pekerjaan Mzimba lebih lanjut; fokus modal dan teknis jangka pendeknya tetap pada Kamerun. Campuran mineral dan kontinuitas kadar masih perlu ditetapkan sebelum potensi bahan baku proyek dapat dinilai.
02 Oct 2026 16:23 (GMT+8)
【Flash | PhotonLink Coherent Menyiapkan Panggung untuk Peningkatan Komersial Indium Fosfida (InP)】
02 Oct 2026 14:34 (GMT+8)
【Flash | PhotonLink Coherent Menyiapkan Panggung untuk Peningkatan Komersial Indium Fosfida (InP)】
Baca Selengkapnya
【Flash | PhotonLink Coherent Menyiapkan Panggung untuk Peningkatan Komersial Indium Fosfida (InP)】
【Flash | PhotonLink Coherent Menyiapkan Panggung untuk Peningkatan Komersial Indium Fosfida (InP)】
Coherent meluncurkan PhotonLink, platform optik terintegrasi untuk infrastruktur AI yang menggabungkan laser Indium Phosphide (InP), fotonik silikon, detektor, dan modul optik. Perusahaan mengungkapkan lebih dari 10 keterlibatan CPO, lebih dari 10 keterlibatan NPO, dan lebih dari lima proyek konektivitas chip-ke-chip, dengan pelanggan utama dan perjanjian jangka panjang yang telah diamankan untuk CPO dan NPO. Pendapatan diperkirakan mulai meningkat pada Q4 2026. Coherent telah mengirimkan lebih dari 300 juta laser InP dan sedang memperluas kapasitas manufaktur InP 6 inci untuk mendukung peningkatan tersebut. Jalur pelanggan memberikan sinyal permintaan komersial yang lebih jelas untuk perangkat InP dan material hulu, meskipun kapasitas tambahan dan konsumsi indium tidak diungkapkan.
02 Oct 2026 14:34 (GMT+8)