The Federal Reserve expects a sharp increase in interest rates, a continuous collapse in the dollar, a rapid rise in the yuan, and a general rebound in metals.

Telah Terbit: Jun 20, 2019 14:21

SMM News: on June 20, the dollar index weakened and fell behind the 97 mark, with the RMB midpoint at 6.8805, up 88 points, compared with 6.8893 on the previous day and 6.9040 on the previous trading day for the onshore renminbi. On June 20, the onshore offshore RMB both rose sharply, and the onshore RMB appreciation recovered the 6.87 mark. The central bank carries out a 14-day reverse repo operation of 30 billion yuan on the open market, with no reverse repo due.

Benefiting from the collapse in the US dollar, basic metals generally rebounded today, with Shanghai Copper 1908 up 0.26 per cent, Shanghai Aluminum 1908 up 0.29 per cent, Shanghai Zinc 1908 down 1.05 per cent, Shanghai lead 1908 falling to 0.8 per cent, Shanghai nickel up 0.34 per cent and Shanghai Tin falling 0.1 per cent as of 14:17.

Early Thursday morning Beijing time, the Federal Open Market Committee (FOMC) issued an interest rate resolution and policy statement, the Federal Reserve announced that the federal funds rate target range of 2.25% to 2.5% unchanged. Markets had widely expected the Fed to stand still in June. In the early hours of March 21, the Federal Reserve released the minutes of its January FOMC meeting and decided not to raise interest rates for the time being. On June 20, the Fed again announced that it would leave the target range for the federal funds rate unchanged between 2.25% and 2.5%.

On interest rate expectations, Powell said the fall in inflation-protected bonds was also one of the reasons for future interest rate cuts. But the Fed has not really discussed the scale of future rate cuts, which will depend on future data and risk prospects. "the Fed will only act on real, sustained trends, not a single event," Powell said. " Powell pointed out that if it is necessary to cut interest rates to support confidence in economic growth, the contraction policy may also be adjusted at that time.

At present, the probability of rapid tightening of China's monetary policy is not high, and there are still downside risks to the global economy. In 2019, monetary policy will still play a vital role in stabilizing growth, social financing and credit loans still need to maintain reasonable growth, commercial banks "wide credit" also need the central bank to provide appropriate liquidity support. In the near future, the liquidity of the monetary authorities has increased, the Ministry of Finance and other relevant departments issued the "Special debt New regulations", macro policy to re-increase the intensity of counter-cyclical adjustment, give play to the role of economic growth.

Jiang Xingchun, director of the Soochow Futures Research Institute, said that since the beginning of this year, the US economic recovery has weakened, and US stocks have also fluctuated and dropped at one point in the face of intensified trade frictions between China and the United States. This has led to a great change in the Fed's monetary policy, which will not continue to raise interest rates. On the contrary, the probability of cutting interest rates once a year has greatly increased, and even entered the interest rate reduction cycle from this year. Therefore, the US dollar index has shown a concussion and decline. If Trump wants to be re-elected, he also needs to maintain better stock market performance, and the Fed also needs to cooperate with and make a decision to cut interest rates, otherwise it will remove Powell from his post as chairman of the Federal Reserve, and in the future, the probability of the Fed cooperating with interest rate cuts will greatly increase.

Expectations of the Fed cutting interest rates are getting higher and higher. Market participants now believe the Fed is as likely to cut interest rates as high as 80% at its regular meeting at the end of July and nearly 100% this year, according to the latest Fed Watch survey. If the Fed turns to cut interest rates, the strong dollar pattern will undoubtedly be difficult to maintain, and the external pressure on the RMB exchange rate will be greatly reduced.

With the relief of external pressure, China's monetary policy will be more likely to maintain "tightness and moderation", and the RMB exchange rate will further stabilize.

Scan QR code and apply to join SMM metal exchange group, please indicate company + name + main business

 

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
Proyek Katoda Tembaga 300.000 mt Yingkou Jianfa Shenghai Tahap I Tungku Peleburan Mulai Berproduksi, Sistem Pirometalurgi Memasuki Tahap Pengeringan Tungku
12 Sep 2026 16:51
Proyek Katoda Tembaga 300.000 mt Yingkou Jianfa Shenghai Tahap I Tungku Peleburan Mulai Berproduksi, Sistem Pirometalurgi Memasuki Tahap Pengeringan Tungku
Baca Selengkapnya
Proyek Katoda Tembaga 300.000 mt Yingkou Jianfa Shenghai Tahap I Tungku Peleburan Mulai Berproduksi, Sistem Pirometalurgi Memasuki Tahap Pengeringan Tungku
Proyek Katoda Tembaga 300.000 mt Yingkou Jianfa Shenghai Tahap I Tungku Peleburan Mulai Berproduksi, Sistem Pirometalurgi Memasuki Tahap Pengeringan Tungku
Pada 12 September pukul 9:58, tungku peleburan inti sistem pirometalurgi di proyek pemulihan multi-logam Yingkou Jianfa Shenghai Nonferrous Metals & Chemicals Co., Ltd. berhasil dinyalakan, secara resmi memasuki tahap pengeringan tungku dan menandai langkah kunci menuju commissioning dan produksi seluruh lini. Informasi publik menunjukkan bahwa proyek peningkatan teknologi pemulihan komprehensif bijih emas-perak polimetalik kompleks, relokasi, dan perluasan Yingkou Jianfa Shenghai menggunakan konsentrat tembaga sebagai bahan baku utama, dengan kapasitas terencana keseluruhan 600.000 ton/tahun katoda tembaga yang akan dibangun dalam dua fase, dengan kapasitas 300.000 ton/tahun per fase. Fase I dirancang untuk memproduksi 300.000 ton/tahun katoda tembaga dan 1,18 juta ton/tahun asam sulfat, beserta sistem pendukung untuk peleburan, konversi, pemurnian anoda, elektrolisis, benefisiasi terak, dan pemulihan logam mulia. Setelah penyalaan ini, proyek akan melaksanakan pengeringan tungku terstandarisasi dan uji coba terpadu kondisi panas di seluruh sistem untuk memverifikasi peralatan, instrumen, interlock, dan sistem kontrol otomatis. Proyek ini belum secara resmi memulai pengumpanan bahan baku dan produksi; setelah pengeringan tungku dan commissioning sistem selesai, akan dilanjutkan dengan commissioning kapasitas katoda tembaga 300.000 ton/tahun Fase I. Jika proyek berhasil mulai berproduksi, diharapkan dapat meningkatkan kapasitas peleburan tembaga di Tiongkok Utara dan semakin mendorong permintaan domestik akan bahan baku konsentrat tembaga.
12 Sep 2026 16:51
Logam Mulia Tetap Bergerak dalam Kisaran saat Makro Memasuki Jendela Validasi Kunci [Analisis Makro Logam Mulia SMM]
11 Sep 2026 17:43
Logam Mulia Tetap Bergerak dalam Kisaran saat Makro Memasuki Jendela Validasi Kunci [Analisis Makro Logam Mulia SMM]
Baca Selengkapnya
Logam Mulia Tetap Bergerak dalam Kisaran saat Makro Memasuki Jendela Validasi Kunci [Analisis Makro Logam Mulia SMM]
Logam Mulia Tetap Bergerak dalam Kisaran saat Makro Memasuki Jendela Validasi Kunci [Analisis Makro Logam Mulia SMM]
11 Sep 2026 17:43
Amigo Resources Melaporkan Nilai PGM hingga 7,07 ppm dalam Uji Pengolahan di Tanzania
11 Sep 2026 16:30
Amigo Resources Melaporkan Nilai PGM hingga 7,07 ppm dalam Uji Pengolahan di Tanzania
Baca Selengkapnya
Amigo Resources Melaporkan Nilai PGM hingga 7,07 ppm dalam Uji Pengolahan di Tanzania
Amigo Resources Melaporkan Nilai PGM hingga 7,07 ppm dalam Uji Pengolahan di Tanzania
[SMM Flash] Amigo Resources melaporkan hasil laboratorium independen dari material terpilih asal Tanzania yang menunjukkan nilai gabungan PGM sebesar 6,94–7,07 ppm, bersama dengan nilai emas residu sebesar 3,27–3,47 ppm. Perusahaan menyatakan sedang mengkaji integrasi teknologi konsentrasi PGM miliknya ke dalam diagram alir pemrosesan untuk menargetkan perolehan dari tailing gravitasi dan material residu lainnya. Amigo juga sedang mengevaluasi rute perlakuan pirometalurgi copper-matte dan telah mengerahkan tungku skala kecil untuk pengujian lebih lanjut. Program ini berpotensi menetapkan PGM sebagai produk sampingan yang dapat diperoleh kembali dari material polimetalik Tanzania milik Amigo jika pekerjaan metalurgi selanjutnya menunjukkan perolehan yang layak. Namun, kadar yang dilaporkan berkaitan dengan material uji terpilih dan studi pemrosesan, serta bukan merupakan Sumber Daya Mineral, cadangan, atau bukti produksi PGM skala komersial yang sesuai standar. Oleh karena itu, pengujian metalurgi lebih lanjut akan menjadi penting untuk menentukan apakah kandungan PGM yang dilaporkan dapat diubah menjadi aliran produk yang dapat diperoleh kembali secara ekonomis.
11 Sep 2026 16:30