Toyota's Solid-State Battery Layout: Mass Production in 2027 to Achieve a 1,000-km Driving Range Revolution

Published: Nov 21, 2025 12:55
Source: SMM
Toyota has been deeply engaged in sulphide solid-state batteries, achieving an energy density of 450-500 Wh/kg, with fast charging enabling a 1,200-km driving range in 10 minutes. Mass production and installation in vehicles is planned for 2027, and Toyota is collaborating with Sumitomo and Idemitsu Kosan to overcome material and cost bottlenecks.

SMM November 21 News:

Highlight Toyota has been deeply engaged in sulphide solid-state batteries, achieving an energy density of 450-500 Wh/kg, with fast charging enabling a 1,200-km driving range in 10 minutes. Mass production and installation in vehicles is planned for 2027, and Toyota is collaborating with Sumitomo and Idemitsu Kosan to overcome material and cost bottlenecks.


Toyota's solid-state battery strategy primarily focuses on the sulphide electrolyte route, with mass production planned for 2027. Some reports mention 2026 or 2028, depending on technological progress and collaboration advancement. The actual progress is as follows, providing an overview of Toyota's solid-state battery layout in Japan.

Solid-State Battery Technology: Sulphide Electrolyte Route

The energy density reaches as high as 450-500 Wh/kg, more than double that of current ternary lithium batteries. Through the jointly developed "high-durability cathode material" with Sumitomo Metal Mining, the issue of material degradation during repeated charge-discharge cycles has been successfully resolved. The battery lifespan can exceed 15 years, with capacity retention remaining over 90% after 2,000 cycles.

More revolutionary is its fast-charging performance: it can charge from 0% to 80% in just 10 minutes. Coupled with an 800V high-voltage platform, the charging speed is four times faster than existing fast-charging technologies.

Mass Production Timeline




According to Toyota's plan, a solid-state battery factory with an annual production capacity of 10 GWh will be built in Japan in 2026. Initial capacity will be prioritized for high-end Lexus car models, with an expected selling price of 800,000 to 1 million yuan. The target users at this stage are tech early adopters and high-end business professionals, aiming to capture the market through the differentiated experience of "no driving range anxiety."

By 2030, as the mass production cost of lithium sulphide decreases, Toyota plans to reduce the cost of solid-state batteries to within 1.5 times that of liquid batteries, gradually popularizing them in mid-end car models.

2026: Some reports indicate Toyota plans small-scale mass production in 2026, but actual progress is affected by technical bottlenecks.
2027: Toyota, in collaboration with Sumitomo Metal Mining and Idemitsu Kosan, plans to commence mass production of lithium sulphide materials in 2027 and equip them in high-performance EVs, achieving a driving range of approximately 1,200 km.
2028: Some reports mention 2028 as the final commercialization target, overlapping with the 2027 mass production plan.

Collaborations and Progress
Collaboration with Sumitomo Metal Mining on cathode material development, and joint establishment of a lithium sulphide factory with Idemitsu Kosan (scheduled for operation in 2027). Prototype battery packs have been demonstrated, but large-scale production still requires resolving material stability and cost issues.

On October 7, 2025, Toyota's solid-state battery officially received production approval in Japan. Mass production is set to begin in 2026, and in 2027, it will first be equipped in Lexus flagship models, achieving the epic breakthrough of "charging for 10 minutes for a 1,200-km driving range."

Toyota's Patents

Toyota holds over 1,000 solid-state battery patents globally, ranking among the world's leaders and establishing a strong technological barrier.

Toyota Profile
Toyota Motor Corporation is one of the world's largest automobile manufacturers and the largest enterprise in Japan.
Automotive Brands: Toyota, covering a full range of models from family sedans to luxury SUVs. Luxury Brand: Lexus, targeting the high-end market. Other affiliated brands: Daihatsu, Hino. Product Lines: Traditional internal combustion engine vehicles: such as global popular models like the Camry, Corolla, and RAV4. New Energy Vehicles: hybrid Prius, pure electric bZ series, and hydrogen fuel cell model Mirai.
Partners: Prime Planet Energy & Solutions (under Panasonic), Idemitsu Kosan, etc.

[Overseas Solid-State Battery: Sumitomo and Toyota Reach Cooperation Agreement on All-Solid-State Battery Cathode Materials] On October 8, 2025, it was announced that Sumitomo Metal Mining Co., Ltd. and Toyota Motor Corporation reached a cooperation agreement on mass-producing cathode materials for all-solid-state batteries used in battery electric vehicles (BEVs). Both parties will jointly advance the R&D process. Toyota reiterated its plan to launch BEVs equipped with all-solid-state batteries between 2027 and 2028.


According to SMM projections, all-solid-state battery shipments are expected to reach 13.5 GWh by 2028, while semi-solid-state battery shipments are forecast to reach 160 GWh. By 2030, global lithium-ion battery demand is estimated to be around 2,800 GWh, with the compound annual growth rates from 2024 to 2030 for lithium-ion battery demand in EVs, ESS, and consumer electronics at approximately 11%, 27%, and 10%, respectively. The global penetration rate of solid-state batteries is projected to be around 0.1% in 2025, and is expected to reach about 4% for all-solid-state batteries by 2030. By 2035, the global penetration rate of solid-state batteries may approach 10%.

**Note:** For further details or inquiries regarding solid-state battery development, please contact:
Phone: 021-20707860 (or WeChat: 13585549799)
Contact: Chaoxing Yang. Thank you!

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
CIBF2026 Solid-State: Toward Solid-State, Still Testing
May 20, 2026 14:42
CIBF2026 Solid-State: Toward Solid-State, Still Testing
Read More
CIBF2026 Solid-State: Toward Solid-State, Still Testing
CIBF2026 Solid-State: Toward Solid-State, Still Testing
CIBF2026 Solid-State Battery Recap: It’s Complicated – Everyone Is Moving Toward Solid-State, but Everyone Is Still Testing the Waters May 13–15, 2026 – The solid-state battery exhibition revealed that solid-state has become a "must-have" for exhibitors. However, technology paths (sulfide/oxide/semi-solid) remain deeply divided, the definition of "mass production" has been diluted, and most products are still in the sample-validation stage.
May 20, 2026 14:42
China April Phosphate Ore Imports Hit 207K mt, Up 13.5% MoM; Jordan Resumes, Peru Becomes No.2 Source
May 20, 2026 13:19
China April Phosphate Ore Imports Hit 207K mt, Up 13.5% MoM; Jordan Resumes, Peru Becomes No.2 Source
Read More
China April Phosphate Ore Imports Hit 207K mt, Up 13.5% MoM; Jordan Resumes, Peru Becomes No.2 Source
China April Phosphate Ore Imports Hit 207K mt, Up 13.5% MoM; Jordan Resumes, Peru Becomes No.2 Source
According to customs data released on May 20, 2026, China’s phosphate ore imports stood at 207,000 mt in April 2026, rising 13.5% month-on-month from 182,000 mt in March. April total import value hit US$19.741 million, a MoM increase of 35.7% versus US$14.552 million in March. The average import unit price was US$95.5 per mt, up 19.6% from US$79.9 per mt in March.
May 20, 2026 13:19
[Lithium Battery: Tianli Lithium Energy's Products Compatible With Solid-State Routes Achieve Mass Shipments]
May 18, 2026 15:54
[Lithium Battery: Tianli Lithium Energy's Products Compatible With Solid-State Routes Achieve Mass Shipments]
Read More
[Lithium Battery: Tianli Lithium Energy's Products Compatible With Solid-State Routes Achieve Mass Shipments]
[Lithium Battery: Tianli Lithium Energy's Products Compatible With Solid-State Routes Achieve Mass Shipments]
On May 16, Tianli Lithium Energy disclosed that its high-nickel 9-series products, which are compatible with solid-state battery technology routes, have achieved mass shipments. These products possess strong industry competitiveness in aspects such as energy density, cycle stability, and solid-state interface compatibility. The company is actively cooperating with multiple customers to continuously deepen its business relationships.
May 18, 2026 15:54