SMM Morning Comment For SHFE Base Metals September 15

Publié: Sep 15, 2023 09:53 (GMT+8)
Source: SMM
LME copper prices opened at $8434/mt and closed with a gain of 0.52% at $8438/mt last evening, with the low-end of $8403/mt and the high-end of $8491/mt.

SHANGHAI, Sep 15 (SMM) –

Copper

LME copper prices opened at $8434/mt and closed with a gain of 0.52% at $8438/mt last evening, with the low-end of $8403/mt and the high-end of $8491/mt. Trading volume stood at 17,000 lots. Open interest stood at 278,000 lots. The most active SHFE 2310 copper contract prices opened at 69570 yuan/mt and finished at 69560 yuan/mt last evening, up 0.46%, with the low-end of 69370 yuan/mt and the high-end of 69620 yuan/mt. Trading volume was 24,000 lots, and open interest stood at 161,000 lots. On the macro front, retail sales in the US increased by 0.6% in August, higher than expected 0.2%. Its PPI monthly rate recorded 0.7%, the largest increase in more than a year, higher than the expected 0.4%. In addition, the number of initial jobless claims in the United States in the week to September 9 recorded 220,000, continuing to be lower than the expected 225,000. Downstream purchasing enthusiasm was weak. Yesterday, spot premiums turned into discounts in both East China or South China. In terms of consumption, the market has optimistic expectations for the peak season from September to October. It is expected that copper prices will remain rangebound at high levels due to market expectations over Fed ending interest rate hike.

Aluminum

Overnight, the most-traded SHFE 2310 aluminum contract opened at 19,360 yuan/mt, with its lowest and highest at 19,310 yuan/mt and 19,390 yuan/mt before closing at 19,330 yuan/mt, up 105 yuan/mt or 0.55% compared with the previous trading day. LME aluminum opened at $2,211/mt on Thursday, with its high and low at $2,239/mt and $2,206.5/mt respectively before closing at $2,220/mt, an increase of $12/mt or 0.54%.

There are expectations for hawkish stance of the US Fed. Domestic reserve requirement ratio cuts unleashed liquidity vitality and effectively boosted market confidence. In the near future, we need to pay close attention to the multiple impacts of interest rate hike expectations in Europe and the US and exchange rate fluctuations on the non-ferrous metals market. Aluminum supply increased, with domestic social inventory of aluminum ingots rising above the 500,000 mt mark, and the inventory pressure in September may mount. At the same time, the supply of imported goods in the market has increased recently, and we need to be alert to the impact of imported low-priced supplies on the domestic aluminum spot market. Low inventory will support aluminum price, while supply pressure will cap gains. It remains uncertain how strong demand will be in September since the demand in peak season didn’t reach expectations. SMM expects short-term aluminum prices to remain volatile at a high level and will pay attention to domestic aluminum inventories and downstream consumption in the future.

Lead

LME lead prices opened at $2245/mt and closed flat at $2245.5/mt in the overnight trading.

The most active SHFE 2310 lead contract prices opened at 16890 yuan/mt last evening, and closed at 16965 yuan/mt, an increase of 0.53%, with the high-end of 17020 yuan/mt and the low-end of 16845 yuan/mt.

Zinc

Last evening, LME zinc prices opened at $2526/mt and went up to close at $2560/mt, up $32/mt or 1.27%. Trading volume increased to 14219 lots, and open interest decreased 967 lots to 210,000 lots. Overnight LME inventories fell by 4,750 tons to 127,450 tons, a decrease of 3.59%. At the same time, boosted by domestic fiscal policy support and the end of the European Central Bank's interest rate hike expectations, LME zinc rose all the way.

The most active SHFE 2310 zinc contract prices opened at 22100 yuan/mt and closed at 21990 yuan/mt last evening, up 170 yuan/mt or 0.78%. The trading volume was down to 76990 lots, and open interest decreased 1926 lots to 108,000 lots. Overnight, the central bank sent another RRR cut message, which raised expectations for improving demand.

Tin

SHFE 2310 tin contract maintained sideways after the opening last night, then rose rapidly. It finally closed at 218,750 yuan/mt, up 0.86%.

Spot premiums and discounts barely changed yesterday. Small brand tin ingots were offered at premiums of 300 yuan/mt, premiums of 300-500 yuan/mt for delivery brands, and premiums of 1,000-1,200 yuan/mt for Yunxi brand. Imported tin brands were offered at a discount of 400 yuan/mt, and a discount of 500 yuan/mt for imported brand tin ingots slated to arrive in China next week. Buying sentiment in spot market cooled after tin price rallied sharply yesterday.

Nickel

Overnight, the most-traded SHFE nickel contract opened at 161,190 yuan/mt, and closed at 162,300 yuan/mt, up 700 yuan/mt. Trading volume rose by 13,749 lots, and open interest decreased by 3,997 lots. The seasonally adjusted CPI annual rate announced by the U.S. Department of Labor at the end of August was 3.7%, higher than the previous market expectation of 3.6% and the previous value of 3.2%. The data reflects that inflation in August rebounded beyond market expectations but core CPI maintained a downward trend. Market expectations for an interest rate hike in September were still low, but expectations for future interest rate cuts were still uncertain. On the whole, negative macroeconomic factors weakened and nickel prices may rebound slightly in the future.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
SHFE : Approuve Jinchuan Group Co., Ltd. pour l'extension du site de production enregistré de la marque « JNMC » de cuivre de catégorie A (cathode permanente-K)
il y a 6 heures
SHFE : Approuve Jinchuan Group Co., Ltd. pour l'extension du site de production enregistré de la marque « JNMC » de cuivre de catégorie A (cathode permanente-K)
Lire la suite
SHFE : Approuve Jinchuan Group Co., Ltd. pour l'extension du site de production enregistré de la marque « JNMC » de cuivre de catégorie A (cathode permanente-K)
SHFE : Approuve Jinchuan Group Co., Ltd. pour l'extension du site de production enregistré de la marque « JNMC » de cuivre de catégorie A (cathode permanente-K)
il y a 6 heures
[Annonce SMM] Suspension des mises à jour des prix des métaux et des actualités du marché chinois pendant les vacances de la fête nationale (1er-7 octobre)
il y a 7 heures
[Annonce SMM] Suspension des mises à jour des prix des métaux et des actualités du marché chinois pendant les vacances de la fête nationale (1er-7 octobre)
Lire la suite
[Annonce SMM] Suspension des mises à jour des prix des métaux et des actualités du marché chinois pendant les vacances de la fête nationale (1er-7 octobre)
[Annonce SMM] Suspension des mises à jour des prix des métaux et des actualités du marché chinois pendant les vacances de la fête nationale (1er-7 octobre)
il y a 7 heures
Koryx Copper termine le forage PFS de Haib et vise une mise à jour des ressources et du PFS d'ici la fin de l'année
il y a 7 heures
Koryx Copper termine le forage PFS de Haib et vise une mise à jour des ressources et du PFS d'ici la fin de l'année
Lire la suite
Koryx Copper termine le forage PFS de Haib et vise une mise à jour des ressources et du PFS d'ici la fin de l'année
Koryx Copper termine le forage PFS de Haib et vise une mise à jour des ressources et du PFS d'ici la fin de l'année
Koryx Copper a achevé son programme de forage intercalaire et d'extension sur le projet de cuivre Haib, détenu à 100 % dans le sud de la Namibie, faisant progresser le projet vers une estimation actualisée des ressources minérales et une étude de préfaisabilité dont la publication est prévue avant la fin de 2026. La société a publié les résultats d'analyse de 18 nouveaux sondages totalisant 7 074 mètres. Parmi les derniers résultats, le sondage HM199 a retourné 438 mètres titrant 0,40 % d'équivalent cuivre (CuEq), dont 224 mètres à 0,51 % CuEq. Le sondage HM193 a retourné 681 mètres à 0,34 % CuEq, dont 22 mètres à 0,71 % CuEq et 169 mètres à 0,40 % CuEq. Koryx a indiqué que ces résultats continuaient de démontrer de larges intervalles minéralisés sur l'ensemble du gisement de Haib, ainsi que des zones à plus haute teneur plus proches de la surface dans certains secteurs. La société a précisé que les résultats concordaient globalement avec son modèle géologique existant, et que le programme de forage achevé alimentera les travaux de modélisation géologique et d'estimation en vue de la mise à jour des ressources et de l'étude de préfaisabilité. Haib est un vaste gisement porphyrique disséminé de cuivre-molybdène-or. Koryx envisage actuellement de développer le projet sous la forme d'une exploitation à ciel ouvert à grande échelle utilisant un broyage et une flottation conventionnels des sulfures pour produire des concentrés de cuivre et de molybdène. Ces derniers forages font suite à l'estimation des ressources minérales de mars 2026 de Koryx, qui faisait état de 744 millions de tonnes de ressources indiquées titrant 0,28 % de cuivre, contenant environ 2,09 millions de tonnes de cuivre, et de 579 millions de tonnes de ressources présumées titrant 0,24 % de cuivre, contenant environ 1,39 million de tonnes de cuivre, sur la base d'une teneur de coupure de 0,15 % de cuivre. Koryx a indiqué que la mise à jour des ressources et l'étude de préfaisabilité restaient en bonne voie pour une publication avant la fin de 2026. L'achèvement du programme de forage de l'étude de préfaisabilité marque une nouvelle étape dans l'avancement de Haib par Koryx Copper vers un développement potentiel de cuivre à grande échelle. Les derniers forages continuent de montrer de larges intervalles minéralisés, tandis que la prochaine estimation actualisée des ressources apportera une plus grande clarté sur la question de savoir si les récents forages intercalaires et d'extension ont modifié de manière significative la base de ressources du projet. L'attention se portera désormais sur la mise à jour des ressources et l'étude de préfaisabilité attendues avant la fin de l'année, qui devraient fournir davantage de détails sur la configuration minière proposée, la stratégie de traitement, le profil de production et l'économie du projet.
il y a 7 heures