China Weekly Inventory Summary and Data Wrap (Mar 24)

Publié: Mar 24, 2023 18:30
Source: SMM
This is a roundup of China's metals weekly inventory as of March 24.

SHANGHAI, Mar 24 (SMM) - This is a roundup of China's metals weekly inventory as of March 24.

SMM Weekly Update of China Aluminium Ingot and Billet Social Inventories (Mar 23, 2023)

Aluminium ingot: The aluminium ingot social inventories across China’s eight major markets stood at 1.13 million mt as of March 23, down 85,000 mt from a week ago and 47,000 mt from Monday March 20. The figure, albeit up 85,000 mt from the same period last year, has fallen 143,000 mt from the peak recorded in early March. Stocks across three major markets dropped sharply, led by south China, where fewer cargoes arrived following output cuts by smelters earlier while demand recovered. East China saw smooth cargo outflows from warehouses, while trades in Gongyi, Henan province were driven by downstream rigid demand. The destocking was primarily driven by limited arrivals, even though shipments from warehouses picked up. The pace of destocking deserves close attention.
Aluminium billet: After two weeks of accumulation, the domestic aluminium billet social inventory dipped 1,500 mt from a week ago to 167,900 mt as of March 23. Stable aluminium billet production ensured smooth arrivals. More billets flowed to Foshan instead of Wuxi due to widening price difference between the two regions. As a result, stocks in Foshan kept growing while those in Wuxi declined rapidly. Considering stable billet production and continued rise in downstream operating rates in March-April, aluminium billet stocks are on track to drop further, albeit at a slow pace.

Copper Inventory in Major Chinese Markets Fell This Week

As of Friday March 24, SMM copper inventory across major Chinese markets stood at 200,100 mt, a sharp decline of 18,700 mt from Monday and 26,100 mt from last Friday. Total inventories added 3,400 mt from pre-CNY levels, rolling back all gains post-CNY holidays. This is the first inventory decline for four consecutive weeks since end-December 2022. Compared with Monday, copper inventories fell across all regions. Total domestic inventories added 51,200 mt from 148,800 mt in the same period last year. Inventories in Shanghai were 25,700 mt higher than the same period last year, those Guangdong were 11,400 mt higher, those in Jiangsu were 11,200 mt higher and those in Chongqing increased 2,900 mt.

In detail, the inventories in Shanghai dropped 12,400 mt from Monday to 115,700 mt, and those in Jiangsu fell 2,200 mt to 19,400 mt. While downstream stockpiling was lower than the week prior, shipments arrivals declined, reducing total inventories in east China. Inventory in Guangdong decreased by 700 mt from Monday to 53,600 mt. Arriving shipments in Guangdong increased and consumption weakened, resulting in lower daily average shipments from Guangdong. The inventory decline in Chongqing is attributable to local stronger consumption.

Sellers will be rush to liquidate stocks at the month-end, so the supply should increase next week. Downstream purchasing interest will fall. In aggregate, SMM expects supply to grow and demand to weaken next week, slowing the inventory decline compared to this week.

Copper Inventories in China Bonded Zone Decreased This Week

As of Friday March 24, copper inventories in China’s bonded zones decreased 8,800 mt from March 17 to 191,800 mt, according to the latest SMM survey. Inventory in the Guangdong bonded zone dipped 1,500 mt to 13,500 mt, and inventory in the Shanghai bonded zone fell 7,300 mt to 178,300 mt. Trading of seaborne copper under warrants picked up last week after the opening of the import window, growing shipments from bonded zone inventories. Arriving shipments under bill of lading, on the other hand, remained low. This week, the import window closed, muting trades. Some cargoes under bill of lading, slated to arrive at the month-end, are believed to have gone to the bonded warehouses, and shipments under warrants from bonded zone inventories will also decline. The decline in copper inventories in China’s bonded zones is unlikely to sustain.

Decline in Lead Ingot Inventory will Slow Down amid Increasing Supply and Weakening Demand

As of March 24, the social inventory of lead ingots across Shanghai, Guangdong, Zhejiang, Jiangsu and Tianjin was 40,800 mt, down 14,700 mt from last Friday and 12,500 mt from Monday.

According to the survey, the maintenance of large-scale primary lead and secondary lead smelters further weighed on the regional supply of lead ingots. At the same time, downstream companies purchased on demand after the delivery of SHFE 2303 lead contract. As such, the social inventory of lead ingots dropped sharply. At the beginning of April, and the maintenance of some secondary lead smelters will be completed, hence the supply of lead ingots is expected to recover slowly. But the lead battery market is gradually entering the off-season, which will drag down lead consumption. Therefore, it is expected that the decline in lead ingot inventory will slow down next week.

Zinc Ingot Social Inventory Down 9,600 mt from Monday

SMM data shows that social inventories of zinc ingots across seven major markets in China totalled 155,400 mt as of this Friday March 24, down 14,000 mt from a week earlier and 9,600 mt lower than this Monday (March 20).

In Shanghai, the warehouse inflows dropped compared with a week ago due to low arrivals. In addition, some zinc ingots were transferred to Ningbo to ease the supply tightness there. As a result, the inventory in Shanghai shrank. In Guangdong, the market arrivals were stable during the week, while downstream buyers still purchased in small amounts on dips, thus the inventory in Guangdong slipped slightly. In Tianjin, the social inventory diminished as operating rates of downstream enterprises were high in spite of the impact of environmental protection measures in Hebei.

Overall, the total inventory in Shanghai, Guangdong and Tianjin fell 8,500 mt, and that across seven major markets in China was down 9,600 mt as well.

Silicon metal stocks fell

Silicon metal stocks across China’s three major markets stood at 122,000 mt as of March 24, a drop of 3,000 mt from a ago. The inventories at Tianjin Port and Huangpu Port were stable as cargo inflows into and outflows from warehouses barely changed, except for a few warehouses that reported fewer inflows and outflows. Stocks in Kunming declined as output cuts by silicon metal plants in Dehong prefecture and Lujiang caused fewer cargoes to arrive in this region. Moreover, sell-off by traders at lower prices also contributed to the destocking. 

Nickel Ore Inventories at Chinese Ports Dip 185,000 wmt WoW

As of March 24, the nickel ore inventories at Chinese ports dropped 185,000 wmt from a week earlier to 6.41 million wmt. The total Ni content stood at 50,000 mt. The port inventory across seven major Chinese ports stood at 2.99 million wmt, 235,000 wmt lower than last week. Nickel ore prices crashed this week on the falling NPI prices, but buyers still expected a lower ore price. Traders and mines wrestled over the prices. NPI plants were reluctant to purchase due to the dropping NPI prices. The rainy season in the Philippines did not end, thus the port inventory will fall.

Bonded Zone Inventory of Nickel Falls 300 mt from March 17

Bonded zone inventory of nickel dropped 300 mt to 4,600 mt WoW as of March 24, with the inventory of nickel briquettes and nickel plates standing at 1,370 mt and 3,230 mt respectively, which was in line with market expectations. Nickel prices hovered at lows under pressure. Downstream companies purchased pure nickel on demand. The spread between nickel briquette and nickel sulphate shrank on the fall in pure nickel prices, but the nickel briquette demand from the new energy sector remained critically low.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 11 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 11 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 11 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 11 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 13 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 13 heures