[SMM Analysis] Shanghai Nickel diving fell nearly 2% in the afternoon. Will the supply-side tight support logic be loosened?

Publié: Sep 16, 2020 16:38 (GMT+8)

SMM9 March 16: Shanghai Nickel opened down today, continuous diving fell nearly 2% in the afternoon, and then recovered. By the end of the day, the main contract of Shanghai Nickel 2011 was at 117540 yuan / ton, down 1.17%. In the spot market, most traders have shifted from the Shanghai Nickel 10 contract to the main monthly 11 contract quotation. The morning market inquiry is OK, but only the traders offering low prices have certain transactions. At present, spot fundamentals fluctuate less, downstream bargain-hunting on demand, and consumption is more stable than in the earlier period.

SMM believes that the fundamental focus of nickel prices is still biased towards the nickel ore-nickel iron-stainless steel industry line. The price of nickel ore has risen all the way under the condition of considerable shortage of supply. The high price of Ferro nickel has been supported by both raw material support and tight supply. The mentality of high production in stainless steel plants has not been significantly reduced for the time being. This production line still has a strong support for nickel price. However, the fluctuation of macro factors has obviously disturbed the price of nickel in the short term. Today, the price of nickel seems to have fallen sharply due to the influence of capital sentiment in the afternoon. However, the US dollar index fell rapidly after the close of trading in Shanghai, and Lunni immediately went back to intraday highs, followed the Fed's interest rate resolution in the evening, and is expected to maintain loose liquidity. Short-term Shanghai Nickel may continue to fluctuate at 117000-120000 yuan / ton and Lunni 15100-15400 US dollars / ton.

Institutional point of view:

Huatai Futures: the price of nickel has recently been dragged down and adjusted by the external environment, but the overall upward trend has not yet ended. At present, the supply and demand of nickel is still strong, the prices of nickel ore, high nickel iron and scrap stainless steel continue to rise, the supply of nickel ore in the middle line is tight, the positive feedback of stainless steel demand on nickel price may continue to strengthen, and the domestic demand for new energy vehicles is also gradually recovering. sales of new energy vehicles in Europe are growing rapidly, and nickel supply is in short supply in the third quarter. If the new production capacity of Xiangyu stainless steel in Indonesia is put into production as scheduled in the fourth quarter, or the domestic production of 300 series stainless steel remains at the current high level, the excess supply of nickel and iron in the fourth quarter will also be limited. In the middle line, as the new production capacity of Ferro nickel in Indonesia is put into production one after another, the supply of ferronickel in Indonesia will still become a significant surplus in the future. Nickel in Indonesia can still be further replaced by refined nickel in 304 stainless steel nickel raw materials, and the price of nickel in the middle line may still fall again.

Jinyuan Futures: previously, we believe that the rising trend of nickel prices has basically ended, and the follow-up trend will be dominated by high shocks, which is still maintained at present. The main support of this round of nickel price rise is driven by the downstream demand for stainless steel, but as the price of stainless steel falls, the market demand drops, stainless steel profits turn to a loss, and the demand for nickel begins to decline. In the later stage, with the gradual increase of Ferro nickel production capacity in Indonesia, the impact on domestic supply will be greater and greater, the overall supply will begin to exceed demand, and the upward pressure on nickel prices will become greater and greater. Although the market is gradually entering the pattern of supply exceeding demand, the trend of nickel price is still repeated before a large amount of inventory is accumulated and before the market demand weakens. In the future, the price of nickel is likely to fall after the high shock, but at present it is still mainly wait-and-see, waiting for the accumulation of inventory, until it forms a greater pressure on the price.

Jinrui futures: stainless steel prices peaked, profits are limited, restricting nickel prices to continue to rise. The supply of nickel ore is still tight, and nickel and iron prices are beginning to come under pressure: in the face of a substantial increase in nickel ore supply throughout the year, Philippine mine owners have maintained prices. October futures of some mines have been sold one after another this week, and the market will concentrate their bids next week. The FOB price of Ni mine (1.5%) is expected to increase by about 5-6 US dollars / wet ton. In terms of Ferro-nickel, the domestic high-nickel iron showed a price correction for the first time after it continued to rise in June. Domestic ferronickel production increased faster than expected in August, and the national nickel pig iron output is expected to decline slightly in September. In the case of stainless steel maintaining a high output in September, the overall supply of nickel raw materials is tight, and the price correction of nickel and iron is expected to be limited. At present, stainless steel profits are beginning to be compressed, in the later stage, we pay attention to the impact of profit compression on the actual output, as well as the negative feedback to the industry chain. Overall, the high production of stainless steel continues, and the shortage of raw materials has not been alleviated, the price of nickel may be mainly fluctuated.

"Click to understand and sign up: 2020 China Automotive New Materials Application Summit Forum

Scan the QR code above to view the business cards of the participating companies and sign up online

Scan the code and apply to join the SMM Automotive Industry Exchange Group.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
[Actualité éclair SMM sur le nickel] Les troubles chez PT Askon à Morowali suscitent des inquiétudes
il y a 4 heures
[Actualité éclair SMM sur le nickel] Les troubles chez PT Askon à Morowali suscitent des inquiétudes
Lire la suite
[Actualité éclair SMM sur le nickel] Les troubles chez PT Askon à Morowali suscitent des inquiétudes
[Actualité éclair SMM sur le nickel] Les troubles chez PT Askon à Morowali suscitent des inquiétudes
Le 2 octobre, des manifestations liées à la poussière minière et aux impacts environnementaux ont dégénéré en troubles chez PT Astima Konstruksi (PT Askon) dans le village de Matarape, régence de Morowali, Sulawesi central, en Indonésie. Les médias locaux ont rapporté que les manifestants ont incendié plusieurs véhicules et excavatrices, tandis que l'accès à la route de transport et au quai de l'entreprise était bloqué, perturbant le transport des matériaux. La police a ensuite évacué les ressortissants chinois du site. L'incident a suscité des inquiétudes quant à d'éventuelles perturbations des activités d'extraction de nickel et de logistique à proximité. Cependant, au 5 octobre, aucun rapport confirmé n'a établi l'ampleur des suspensions ou réductions de production dans des mines de nickel spécifiques. Une attention particulière devra être portée à la restauration de l'accès au transport, aux conditions de sécurité locales et à tout impact ultérieur sur l'approvisionnement en minerai de nickel.
il y a 4 heures
[SMM Actualité éclair sur l’acier inoxydable] Froch, de Taïwan (PoC), vise un démarrage début 2027 de son usine de tubes au Maroc destinée à l’Europe
il y a 4 heures
[SMM Actualité éclair sur l’acier inoxydable] Froch, de Taïwan (PoC), vise un démarrage début 2027 de son usine de tubes au Maroc destinée à l’Europe
Lire la suite
[SMM Actualité éclair sur l’acier inoxydable] Froch, de Taïwan (PoC), vise un démarrage début 2027 de son usine de tubes au Maroc destinée à l’Europe
[SMM Actualité éclair sur l’acier inoxydable] Froch, de Taïwan (PoC), vise un démarrage début 2027 de son usine de tubes au Maroc destinée à l’Europe
Froch Enterprise, un fabricant de tubes en acier inoxydable à Taïwan (PoC), a annoncé une nette amélioration de sa rentabilité au premier semestre. L'entreprise a indiqué que la hausse des prix du nickel a relevé les prix des produits, stimulant à la fois le bénéfice avant et après impôts en août. La construction d'installations d'IA et de semi-conducteurs stimule la demande de tuyauterie pour salles blanches, eau pure et infrastructures d'usine, et la tuyauterie industrielle représente désormais 70 % de son mix produits. À l'étranger, Froch a décidé en 2023 d'investir dans une usine au Maroc pour diversifier sa base de production et cibler les marchés européens. Après des ajustements de calendrier antérieurs, l'installation des équipements progresse, avec un marketing prévu pour le quatrième trimestre, des essais d'ici la fin de l'année et une production commerciale au premier trimestre 2027 ; l'usine devrait contribuer aux bénéfices une fois la production stabilisée. Après l'expansion du laminage à froid de YC INOX en Turquie, Froch place également des capacités à proximité de l'Europe, car les fabricants de tubes à Taïwan (PoC) utilisent de plus en plus des bases dans des pays tiers pour atteindre le marché européen. Avec le durcissement des quotas de l'UE et l'origine désormais déterminée par la fusion et la coulée, la provenance des bobines d'acier inoxydable de l'usine marocaine déterminera le statut d'origine et le quota auquel ses produits seront soumis à leur entrée en Europe.
il y a 4 heures
[SMM Info Flash Acier Inoxydable] YC INOX de Taïwan (PoC) se tourne vers les tubes à haute valeur ajoutée alors que la ligne de laminage à froid turque monte en puissance
il y a 5 heures
[SMM Info Flash Acier Inoxydable] YC INOX de Taïwan (PoC) se tourne vers les tubes à haute valeur ajoutée alors que la ligne de laminage à froid turque monte en puissance
Lire la suite
[SMM Info Flash Acier Inoxydable] YC INOX de Taïwan (PoC) se tourne vers les tubes à haute valeur ajoutée alors que la ligne de laminage à froid turque monte en puissance
[SMM Info Flash Acier Inoxydable] YC INOX de Taïwan (PoC) se tourne vers les tubes à haute valeur ajoutée alors que la ligne de laminage à froid turque monte en puissance
YC INOX, fabricant taïwanais de tubes en acier inoxydable (PoC), poursuit la recomposition de son mix produits, les tubes industriels, les tubes propres spéciaux et les tubes de refroidissement liquide pour centres de données IA représentant près de 70 % des expéditions du premier semestre. L'entreprise a été rentable au premier semestre, les résultats du deuxième trimestre s'améliorant nettement par rapport au premier. À l'international, sa filiale turque a enregistré une forte hausse de son chiffre d'affaires au deuxième trimestre et des expéditions record en juin. La production de la ligne locale de laminage à froid monte en puissance, avec un objectif d'environ un tiers de plus, afin de réduire les coûts des matières premières et d'éviter les droits d'importation turcs sur les bobines laminées à froid. Le refroidissement liquide pour l'IA apparaît comme une nouvelle source de demande de tubes en acier inoxydable, tandis que le laminage à froid local en Turquie permet à la fois de contourner les droits d'importation et de rapprocher l'entreprise des marchés européens et moyen-orientaux. Un point à surveiller est l'origine des bobines laminées à chaud utilisées par la ligne turque : si elle utilise des bobines noires d'Indonésie ou d'ailleurs, toute exportation vers l'UE restera soumise aux règles d'origine de fusion et de coulée.
il y a 5 heures