SMM Morning Comment For SHFE Base Metals On June 5

Publicado: Jun 5, 2024 09:56
Fuente: SMM
Overnight, LME copper opened at $10,004.8/mt, peaked at $10,024.5/mt during early trading, then dipped to a session low of $9,914/mt at the end of the trading session, and finally closed at $9,933.5/mt with open interest at 343,000 lots.

SHANGHAI, June 5 (SMM) –

Copper

Overnight, LME copper opened at $10,004.8/mt, peaked at $10,024.5/mt during early trading, then dipped to a session low of $9,914/mt at the end of the trading session, and finally closed at $9,933.5/mt with open interest at 343,000 lots. Overnight, the most-traded SHFE copper contract opened at ¥80,960/mt, peaked at ¥81,060/mt during early trading, then maintained slight fluctuations throughout, hitting a session low of ¥80,320/mt, and finally closed at ¥80,500/mt, down by 1.9%. Trading volume was 82,000 lots and open interest was 181,000 lots. On the macro front, the US non-farm payrolls data is about to be released. The US dollar index rebounded from recent lows due to elevated sentiment, while domestic demand remained weak in the long run, putting pressure on copper prices. Additionally, US job openings in April fell to their lowest level since 2021. Following the data release, US Fed rate swaps indicated an accelerated pace of rate cuts in 2024. A regulation issued by Indonesia's Ministry of Finance on Tuesday showed a 7.5% export tax on copper concentrate exports, also applicable to two companies currently exempt from the export ban. On the fundamentals side, the supply side saw a continuous arrival of domestic and imported copper, with low-price imported copper also flowing in. On the consumption side, as copper prices dipped and the delivery month approached, the premium continued to rise, but overall demand showed no significant recovery. If copper prices continue to fall, a consumption rebound might be seen. In summary, the rebound of the US dollar index pressured copper prices lower, but with the accelerated pace of rate cuts and slow recovery in demand, copper prices might find support at the bottom. Today, the market will focus on the US non-farm payrolls data.

Aluminum

Overnight, the most-traded SHFE 2407 aluminum contract opened at 21,295 yuan/mt, reaching a high of 21,345 yuan/mt and a low of 21,220 yuan/mt, and closed at 21,275 yuan/mt, down 20 yuan/mt, a decrease of 0.09%. The previous trading day, LME aluminum opened at $2,662/mt, reached a high of $2,686.5/mt and a low of $2,635/mt, and closed at $2,662/mt, down $2/mt, a decrease of 0.08%.

Summary: On the macro front, recent data shows that the US economy is gradually slowing down, with manufacturing and construction spending data weaker than expected, indicating that the US Fed is likely to start cutting interest rates later this year. The market is now looking forward to Wednesday's ADP employment report and Friday's US non-farm payrolls data. On the fundamentals, domestic aluminum operating capacity continues to rise, with Yunnan's resumption progressing well and expected to be completed in June, which may gradually highlight supply-side pressure. Aluminum ingot social inventory has been continuously accumulating. From the demand side, recent aluminum prices hit a record high for the year and have shown strong volatility, inhibiting downstream procurement enthusiasm, hurting orders and operating rates. Additionally, as we are currently in the transition phase between peak and off-peak seasons, many sector are showing slight declines in orders, and the overall operating rate is expected to weaken steadily. SMM expects aluminum prices to maintain a wide fluctuation range at a high level.

Lead

Overnight, LME lead opened at $2,292.5/mt, fluctuating around the daily average during the Asian session. Entering the European session, affected by the US dollar's movement, LME lead rose first and then fell, peaking at $2,300.5/mt and dipping to $2,240.5/mt at the end of the trading session, finally closing at $2,243.5/mt, down by 1.82%. Overnight, the most-traded SHFE 2407 lead contract opened lower at ¥18,815/mt, briefly touched a high of ¥18,905/mt during early trading, then trended downward, hitting a session low of ¥18,770/mt at the end of the trading session, and finally closed at ¥18,780/mt, down by 1.11%.

Zinc

Overnight, LME zinc opened at $2,947.0/mt, fluctuated upward to a high of $2,984.0/mt, and hitting a session low of $2,905.0/mt, and finally closing lower at $2,925.0/mt, down by $12/mt or 0.41%. Trading volume reduced to 10,000 lots, and open interest reduced by 3,251 lots to 243,000 lots. LME zinc inventory decreased by 1,325 tons to 254,600 tons, down by 0.52%. US April JOLTs job openings and factory orders data both indicated a weak US economy, weakening macro sentiment and causing LME zinc to fluctuate weakly.

Overnight, the most-traded SHFE zinc contract opened at ¥24,260/mt, peaked at ¥24,270/mt, then fluctuated widely around the daily average amid a tug-of-war between bulls and bears, hitting a session low of ¥24,030/mt, then slightly rebounded to fluctuate around ¥24,160/mt, and finally closed lower at ¥24,160/mt, down by ¥140/mt or 0.58%. Trading volume reduced to 99,000 lots, and open interest reduced by 2,024 lots to 90,000 lots. Affected by overseas futures, SHFE zinc dropped slightly, but the weak supply-demand pattern remained unchanged, and SHFE zinc is expected to remain weak during the day.

Tin

In the night session yesterday, SHFE 2407 tin contract closed at 263,700 yuan/mt, down 3,670 yuan/mt, a decrease of 1.37%. The highest price was 266,200 yuan/mt, and the lowest was 262,360 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 300-700 yuan/mt over SHFE 2407 tin contract, versus discounts of 500 yuan/mt to premiums of 300 yuan/mt for delivery brands and premiums of 0-500 yuan/mt for Yunxi brand. Tin prices moved rangebound yesterday. Downstream companies, mostly having stocked up enough raw materials earlier, barely showed any purchasing interest. Yesterday, SHFE tin warrants decreased by 303 mt to 16,788 mt, while LME tin inventory remained flat at 5,000 mt.

Nickel

On June 4, Jinchuan nickel was at a premium of 1,000-1,200 yuan/mt, with an average of 1,100 yuan/mt, up 300 yuan/mt compared to the previous trading day. Russian nickel was at a discount of 200-500 yuan/mt, with an average of 350 yuan/mt, up 150 yuan/mt compared to the previous trading day. In the morning, as the market continued to decline, the spot market saw a slight recovery in transactions, and there was a shortage of electro-deposited nickel in the spot market. Nickel briquette prices were 143,600-144,300 yuan/mt, down 2,900 yuan/mt compared to the previous trading day. The price gap between nickel briquette and nickel sulphate was about 7,186 yuan/mt (nickel sulphate prices were 7,186 yuan/mt higher than nickel briquette prices).

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
hace 12 horas
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
Leer más
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
ACG Metals anunció el 1 de septiembre que su mina Gediktepe en Turquía produjo su primer concentrado de cobre el 31 de agosto, marcando el inicio de la fase de aumento de producción. La compañía incrementará progresivamente el rendimiento y optimizará el rendimiento de la planta, con el objetivo de alcanzar la producción completa para finales de 2026. El objetivo de producción anual en estado estacionario de Gediktepe es de 20.000 a 25.000 toneladas de cobre equivalente. El anuncio completo también confirmó que la mina produjo su primer concentrado de zinc en agosto de 2026, aunque no se revelaron la fecha específica ni los volúmenes. SMM estima que la producción de zinc en concentrado de la mina será de aproximadamente 10.000 a 15.000 toneladas de zinc contenido en 2026.
hace 12 horas
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
hace 12 horas
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
Leer más
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
hace 12 horas
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
hace 14 horas
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
Leer más
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
Epiroc ha conseguido un pedido de aproximadamente 610 millones de coronas suecas (64 millones de dólares) de MMG Limited y sus contratistas mineros, China Huaye y 23MCC, para equipos de minería subterránea destinados a apoyar la ampliación de la mina de cobre Khoemacau en Botsuana. El pedido incluye jumbos de frente, jumbos de producción, equipos de empernado con cable, cargadoras y camiones mineros subterráneos, junto con sistemas de control remoto, repuestos, formación y asistencia técnica in situ. Los equipos respaldarán la ampliación en curso de Khoemacau por parte de MMG, diseñada para aumentar la capacidad de producción anual de aproximadamente 60.000 a 130.000 toneladas de cobre metálico en concentrado. El proyecto incluye la construcción de una nueva planta de procesamiento de 4,5 millones de toneladas anuales, que elevará la capacidad total de molienda a más de 8 millones de toneladas anuales, junto con el desarrollo de Zone 5 North, Mango y Zeta North-East. Se espera el primer concentrado de cobre de la ampliación en el primer semestre de 2028. Epiroc indicó que la entrega de la nueva flota subterránea comenzará en el cuarto trimestre de 2026 y se prevé que concluya en el segundo trimestre de 2028, en línea general con el calendario de la ampliación. La flota encargada incluye jumbos de frente Boomer, jumbos de producción Simba, equipos de empernado con cable Cabletec, cargadoras Scooptram y camiones subterráneos Minetruck, con varias unidades equipadas para operación automatizada y por control remoto. El pedido de equipos representa otro hito de ejecución para la ampliación ya aprobada de Khoemacau, más que un nuevo objetivo de producción. Con las adquisiciones en marcha y las entregas de equipos programadas hasta el segundo trimestre de 2028, el proyecto sigue avanzando hacia el aumento previsto por MMG de la capacidad de cobre en concentrado a 130.000 toneladas anuales. La ampliación representa un incremento planificado significativo de la capacidad de producción de cobre de Khoemacau en el Cinturón de Cobre del Kalahari en Botsuana.
hace 14 horas
SMM Morning Comment For SHFE Base Metals On June 5 - Shanghai Metals Market (SMM)