SMM Morning Comment For SHFE Base Metals On May 29

Publicado: May 29, 2024 10:05
Fuente: SMM
Overnight, LME copper opened at $10,456/mt, rose to $10,563.5/mt at the beginning of the session, then dropped to a low of $10,440.5/mt.

SHANGHAI, May 29 (SMM) –

Copper

Overnight, LME copper opened at $10,456/mt, rose to $10,563.5/mt at the beginning of the session, then dropped to a low of $10,440.5/mt. It finally rebounded to close at $10,499/mt. Overnight, the most-traded SHFE copper contract opened at ¥84,870/mt, rose to ¥85,330/mt at the beginning of the session, then dropped to a low of ¥84,130/mt. It finally rebounded to close at ¥84,650/mt, with a decline of 0.12%. Trading volume reached 78,000 lots, and open interest reached 20,600 lots. On the macro level, US Fed officials made hawkish remarks, indicating that the possibility of an interest rate hike is very low but not excluded, putting some pressure on copper prices. Domestically, the National Financial Regulatory Administration stated that it will meet the reasonable financing needs of real estate projects and strongly support the construction of affordable housing and other "three major projects." Meanwhile, Guangzhou and Shenzhen have also adjusted the down payment ratio for first-time homebuyers, canceling or lowering the interest rate floor. On the fundamentals side, in terms of supply, the inflow of imported goods increased significantly during the week, and sellers' cargoes also increased. It is reported that some warehouses in Shanghai are nearly full, and some sellers are adjusting prices to sell, but due to the rebound in copper prices, consumption has not seen a significant increase. Overall, the US dollar index dropped slightly, but favorable domestic real estate policies have boosted copper prices, which are expected to remain strong.

Aluminum

The most-traded SHFE 2407 aluminum contract opened at 21,250 yuan/mt overnight, reaching a high of 21,300 yuan/mt, a low of 21,125 yuan/mt, and closed at 21,205 yuan/mt, up 20 yuan/mt or 0.09%. LME aluminum opened at $2,667/mt in the previous trading session, reaching a high of $2,741.5/mt, a low of $2,667/mt, and closed at $2,732/mt, up $74/mt or 2.78%.

Summary: On the macro front, the US Fed took a hawkish stance again mid-week, but due to the impact of geopolitical tensions and a weakening US dollar, the external macro performance remained bullish. The China-Japan-South Korea leaders' meeting resumed after four-and-a-half-year, and multiple provinces and cities in China implemented new real estate policies, boosting expectations of a real estate recovery. On the fundamentals, domestic aluminum operating capacity continued to increase during the week, with good progress in resuming production in Yunnan, which is expected to be completed in June. Supply pressure may gradually become prominent, with aluminum ingot inventories continuing to accumulate, and high aluminum prices inhibiting inventory consumption. However, LME aluminum inventories fell slightly from highs. During the week, spot alumina prices continued to rise, domestic aluminum costs continued to climb, and the import window remained closed, which may provide some support for aluminum prices. However, from the demand, recent aluminum prices hit a record high for the year and showed strong volatility, inhibiting downstream delivery enthusiasm and leading to a decline in orders and operating rates for aluminum processing enterprises. In addition, the current stage is the transition from the off-season to the peak season, and orders from multiple sector show signs of a slight decline. The subsequent comprehensive operating rate is expected to weaken. SMM predicts that aluminum prices will hover around the current level in the short term.

Lead

Overnight, LME lead opened at $2,307/mt, rising to a high of $2,351/mt, and finally dropped slightly before closing at $2,335.5/mt, up $30.5/mt, or 1.32%. Overnight, the most-traded SHFE lead contract opened at ¥18,870/mt, rose to ¥18,975/mt at the beginning of the session, then dropped to a low of ¥18,795/mt, and finally rebounded to close at ¥18,890/mt, up ¥85/mt, or 0.45%.

Zinc

Overnight, LME zinc opened at $3,071.5/mt, initially fluctuated around the average daily line, then rose to $3,095/mt during the European session, and finally surged to a high of $3,133/mt during the night session, before slightly retreating and closing at $3,119/mt, up $60.5/mt, or 1.98%. Trading volume increased to 6,982 lots, and open interest increased by 682 lots to 237,000 lots.

Overnight, LME inventory decreased by 25 tons to 257,200 tons, a decline of 0.01%. Overnight, the most-traded SHFE zinc contract opened at ¥24,930/mt, surged to ¥25,185/mt at the beginning of the session, then retreated to ¥24,850/mt, and finally closed at ¥24,880/mt, down ¥10/mt, or 0.04%. Trading volume decreased to 128,000 lots, and open interest increased by 1,571 lots to 120,000 lots. The weak consumption is putting pressure on zinc prices, making it difficult for SHFE zinc to gain upward momentum.

Tin

The closing price of the SHFE 2406 tin contract in the overnight session yesterday was 277,250 yuan/mt, up 130 yuan/mt or 0.05%. The highest price reached 280,860 yuan/mt, and the lowest was 275,580 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 0-500 yuan/mt over SHFE 2406 tin contract, versus discounts of 0-500 yuan/mt for delivery brands and premiums of 300-500 yuan/mt for Yunxi brand. During the morning session yesterday, SHFE tin prices fluctuated at high levels, and downstream companies showed a strong sentiment of wait-and-see. Overall, the spot market was relatively quiet yesterday.

Nickel

On May 28, Jinchuan nickel was at a premium of 700-1000 yuan/mt, with an average of 850 yuan/mt, a decrease of 250 yuan/mt compared with the previous trading day. Russian nickel was at a discount of 200 to 800 yuan/mt, with an average of 500 yuan/mt, a decrease of 100 yuan/mt compared with the previous trading day. In the morning, the market rose along with the overall non-ferrous metals sector. Spot prices saw adjustments, with traditional brands decreasing and new brands increasing, mainly due to the shortage of domestic spot electro-deposited nickel. However, overall spot market transactions were still dominated by rigid demand purchases. Nickel briquette prices were 152,500-153,300 yuan/mt, an increase of 2,750 yuan/mt compared with the previous trading day. The price gap between nickel briquette and nickel sulphate was about 2,900 yuan/mt (nickel sulphate prices were 2,900 yuan/mt lower than nickel briquette prices).

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
hace 11 horas
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
Leer más
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
ACG Metals anunció el 1 de septiembre que su mina Gediktepe en Turquía produjo su primer concentrado de cobre el 31 de agosto, marcando el inicio de la fase de aumento de producción. La compañía incrementará progresivamente el rendimiento y optimizará el rendimiento de la planta, con el objetivo de alcanzar la producción completa para finales de 2026. El objetivo de producción anual en estado estacionario de Gediktepe es de 20.000 a 25.000 toneladas de cobre equivalente. El anuncio completo también confirmó que la mina produjo su primer concentrado de zinc en agosto de 2026, aunque no se revelaron la fecha específica ni los volúmenes. SMM estima que la producción de zinc en concentrado de la mina será de aproximadamente 10.000 a 15.000 toneladas de zinc contenido en 2026.
hace 11 horas
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
hace 12 horas
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
Leer más
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
hace 12 horas
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
hace 13 horas
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
Leer más
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
Epiroc ha conseguido un pedido de aproximadamente 610 millones de coronas suecas (64 millones de dólares) de MMG Limited y sus contratistas mineros, China Huaye y 23MCC, para equipos de minería subterránea destinados a apoyar la ampliación de la mina de cobre Khoemacau en Botsuana. El pedido incluye jumbos de frente, jumbos de producción, equipos de empernado con cable, cargadoras y camiones mineros subterráneos, junto con sistemas de control remoto, repuestos, formación y asistencia técnica in situ. Los equipos respaldarán la ampliación en curso de Khoemacau por parte de MMG, diseñada para aumentar la capacidad de producción anual de aproximadamente 60.000 a 130.000 toneladas de cobre metálico en concentrado. El proyecto incluye la construcción de una nueva planta de procesamiento de 4,5 millones de toneladas anuales, que elevará la capacidad total de molienda a más de 8 millones de toneladas anuales, junto con el desarrollo de Zone 5 North, Mango y Zeta North-East. Se espera el primer concentrado de cobre de la ampliación en el primer semestre de 2028. Epiroc indicó que la entrega de la nueva flota subterránea comenzará en el cuarto trimestre de 2026 y se prevé que concluya en el segundo trimestre de 2028, en línea general con el calendario de la ampliación. La flota encargada incluye jumbos de frente Boomer, jumbos de producción Simba, equipos de empernado con cable Cabletec, cargadoras Scooptram y camiones subterráneos Minetruck, con varias unidades equipadas para operación automatizada y por control remoto. El pedido de equipos representa otro hito de ejecución para la ampliación ya aprobada de Khoemacau, más que un nuevo objetivo de producción. Con las adquisiciones en marcha y las entregas de equipos programadas hasta el segundo trimestre de 2028, el proyecto sigue avanzando hacia el aumento previsto por MMG de la capacidad de cobre en concentrado a 130.000 toneladas anuales. La ampliación representa un incremento planificado significativo de la capacidad de producción de cobre de Khoemacau en el Cinturón de Cobre del Kalahari en Botsuana.
hace 13 horas