SMM Morning Comment For SHFE Base Metals December 4

Publicado: Dec 4, 2023 09:58
Fuente: SMM
LME copper prices opened at $8552.5/mt and closed at $8625/mt in last Friday trading, a gain of 1.84%, with the low-end of $8511/mt and the high-end of $8640/mt.

SHANGHAI, December 4(SMM) –
Copper
LME copper prices opened at $8552.5/mt and closed at $8625/mt in last Friday trading, a gain of 1.84%, with the low-end of $8511/mt and the high-end of $8640/mt. Trading volume was 32,000 lots, and open interest stood at 266,000 lots. The most active SHFE 2401 copper contract prices opened at 68660 yuan/mt and closed at 68990 yuan/mt last evening, up 0.97%, with the high-end of 69150 yuan/mt and the low-end of 68660 yuan/mt. Trading volumes stood at 40,000 lots and open interest stood at 172,000 lots. On the macro front, last Friday, Powell's speech failed to dispel traders' bets on interest rate cuts next year, and U.S. bond yields plunged during the session. In addition, the U.S. ISM manufacturing PMI index recorded 46.7, which was lower than expected. It was below 50 for the 13th consecutive month, setting the longest record in more than 20 years. On Fundamentals, as of December 1, SMM copper inventories across major Chinese markets stood at 54,900 mt, down 3,700 mt from last Monday and 57,800 mt lower than the same period last year. Limited shipments arrivals of imported and domestic copper over East China and no decline in downstream purchasing lowered inventories. In South China, due to the increase in arrivals from surrounding areas and production halts at some downstream resulted in an increase in inventory. In terms of consumption, with high prices, demand is expected to remain suppressed. Due to the influence of low inventory and macro sentiment, copper prices will move strongly in the near future.
Aluminum
At last Friday’s night session, the most-traded SHFE 2401 aluminum contract opened at 18545 yuan/mt, with its low and high at 18545 yuan/mt and 18695 yuan/mt before closing at 18690 yuan/mt, up 135 yuan/mt or 0.73%. LME aluminum opened at $2198/mt last Friday, with its high and low at $2217/mt and $2183/mt respectively before closing at $2200/mt, an increase of $6/mt or 0.27%.
On the macro front, market expectations for the end of the Federal Reserve's current interest rate hike cycle have increased again. Earlier, Federal Reserve Chairman Powell's speech strengthened the market's confidence that the Federal Reserve has completed monetary policy tightening and may start cutting interest rates starting in March next year. Domestic macroeconomic data have weakened, and the manufacturing PMI index remained below 50%. There are growing expectations for the release of domestic favorable policies at the end of the year, but it will still take time to transmit to the manufacturing industry and other sectors. In terms of fundamentals, there are no further changes expected on the supply side in the short term, and market trading logic generally focuses on the resilience of consumer demand in the off-season. The short-term macro atmosphere is negative and the off-season will pressure aluminum prices. At the same time, inventory continues to be reduced, giving aluminum prices certain support.
Lead
LME lead open at $2131.5/mt and went downward during the Asian trading hours last Friday evening, declining to $2113/mt during the European trading hours. It finally dropped and closed at $2126.5/mt, down $0.5/mt or 0.02%.
The most-traded SHFE 2401 lead contract opened at 15810 yuan/mt and fell 150 yuan/mt or 0.95% to 15705 yuan/mt last Friday evening, briefly hitting the lowest point at 15700 yuan/mt and the highest point at 15850 yuan/mt.
zinc
Last Friday, LME zinc opened at US$2,478.5/ton and tested as low as US$2,455/ton. It touched a high of US$2,533/ton at the end of the day, and finally closed up at US$2,519.5/ton, an increase of US$47/ton, or 1.90%. The trading volume decreased by 760 lots to 10,800 lots, and open interest decreased by 1,667 lots to 202,000 lots. LME inventories decreased by 1,975 tons to 224,300 tons, a decrease of 0.87%.
Last Friday evening, the most-traded SHFE 2401 zinc contract opened at 20750 yuan/mt and rose to 20945 yuan/mt before closing at 20925 yuan/mt, up 205 yuan/mt or 0.99%. Trading volume decreased 51101 to 43,800 lots, and open interest decreased by 4308 lots to 87,900 lots. Caixin China's manufacturing industry in November exceeded expectations and recorded 50.7, returning to above 50. Macroeconomic sentiment has recovered.
Tin
SHFE 2401 tin contract rose to 201120 yuan/mt at last Friday’s night session and closed at 199660 yuan/mt, up 1.92%.
During the early trading last Friday, spot premiums and discounts in domestic spot market for various tin ingot brands did not changes much. Small brand tin ingots were offered at premiums of 0-300 yuan/mt over SHFE 2312 tin contract, versus premiums of 500-800 yuan/mt for delivery brands, premiums of 1000-1100 yuan/mt for Yunxi brand, and discounts of 600 yuan/mt imported brand tin ingots. Due to the recent fluctuations in tin prices, downstream companies mostly took a wait-and-see attitude and the purchasing sentiment was not high.
Nickel
Nickel prices hit bottom and rebounded last week, with a peak daily increase of about 5.2%. By last Friday's close, SHFE nickel prices fell back to 129,380 yuan/mt. On the macro front, the US Labor Department announced on the evening of November 30 that the initial jobless claims for the week ending November 25 were 218,000, compared to the previous value of 209,000, and market expectations of 220,000. Another key data was the US initial jobless claims in the week ending November 18, which were 1.927 million, expected at 1.872 million, and the previous value was 1.84 million. It is worth noting that the initial jobless claims for the week ending November 25 include the Thanksgiving holiday, and there is typically significant volatility in the numbers around holidays. All these data reflect a cooling of the US labor market, leading to increased market expectations for a subsequent interest rate cut by the Federal Reserve. This had a positive impact on commodities in general, but pure nickel was not significantly affected by macro sentiment due to fundamental drag. From a fundamental perspective, according to SMM research, some small electrowinning nickel enterprises reduced output in November. It is anticipated that certain enterprises will resume normal production in December. This has no significant impact on the overall oversupply situation. Additionally, due to the continuous decline in nickel sulphate price and the rebound in SHFE nickel, the premium of nickel sulphate over nickel briquette narrowed to around 1,000 yuan/mt. The production of nickel sulphate from nickel briquette is once again unprofitable. Looking at the downstream demand, alloy orders remained relatively stable overall, with a slight reduction in civilian orders compared to the previous month, leading to a minor decline in pure nickel demand. In summary, the current macro situation continues to improve, but the fundamental pressure on SHFE nickel hinders upward momentum, and there is still downward potential.

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
hace 10 horas
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
Leer más
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
ACG amplía la mina de sulfuros de Gediktepe y produce sus primeros concentrados de cobre y zinc; la producción plena está prevista para finales de 2026
ACG Metals anunció el 1 de septiembre que su mina Gediktepe en Turquía produjo su primer concentrado de cobre el 31 de agosto, marcando el inicio de la fase de aumento de producción. La compañía incrementará progresivamente el rendimiento y optimizará el rendimiento de la planta, con el objetivo de alcanzar la producción completa para finales de 2026. El objetivo de producción anual en estado estacionario de Gediktepe es de 20.000 a 25.000 toneladas de cobre equivalente. El anuncio completo también confirmó que la mina produjo su primer concentrado de zinc en agosto de 2026, aunque no se revelaron la fecha específica ni los volúmenes. SMM estima que la producción de zinc en concentrado de la mina será de aproximadamente 10.000 a 15.000 toneladas de zinc contenido en 2026.
hace 10 horas
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
hace 10 horas
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
Leer más
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
[ Análisis de SMM ] Una guía visual de los informes semestrales de 2026 de 19 fundiciones de cobre
hace 10 horas
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
hace 12 horas
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
Leer más
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
MMG realiza un pedido de equipos por 64 millones de dólares para respaldar la expansión de Khoemacau en Botsuana
Epiroc ha conseguido un pedido de aproximadamente 610 millones de coronas suecas (64 millones de dólares) de MMG Limited y sus contratistas mineros, China Huaye y 23MCC, para equipos de minería subterránea destinados a apoyar la ampliación de la mina de cobre Khoemacau en Botsuana. El pedido incluye jumbos de frente, jumbos de producción, equipos de empernado con cable, cargadoras y camiones mineros subterráneos, junto con sistemas de control remoto, repuestos, formación y asistencia técnica in situ. Los equipos respaldarán la ampliación en curso de Khoemacau por parte de MMG, diseñada para aumentar la capacidad de producción anual de aproximadamente 60.000 a 130.000 toneladas de cobre metálico en concentrado. El proyecto incluye la construcción de una nueva planta de procesamiento de 4,5 millones de toneladas anuales, que elevará la capacidad total de molienda a más de 8 millones de toneladas anuales, junto con el desarrollo de Zone 5 North, Mango y Zeta North-East. Se espera el primer concentrado de cobre de la ampliación en el primer semestre de 2028. Epiroc indicó que la entrega de la nueva flota subterránea comenzará en el cuarto trimestre de 2026 y se prevé que concluya en el segundo trimestre de 2028, en línea general con el calendario de la ampliación. La flota encargada incluye jumbos de frente Boomer, jumbos de producción Simba, equipos de empernado con cable Cabletec, cargadoras Scooptram y camiones subterráneos Minetruck, con varias unidades equipadas para operación automatizada y por control remoto. El pedido de equipos representa otro hito de ejecución para la ampliación ya aprobada de Khoemacau, más que un nuevo objetivo de producción. Con las adquisiciones en marcha y las entregas de equipos programadas hasta el segundo trimestre de 2028, el proyecto sigue avanzando hacia el aumento previsto por MMG de la capacidad de cobre en concentrado a 130.000 toneladas anuales. La ampliación representa un incremento planificado significativo de la capacidad de producción de cobre de Khoemacau en el Cinturón de Cobre del Kalahari en Botsuana.
hace 12 horas