Aluminum ingot destocking trend continues; macro pressure keeps aluminum prices in the doldrums [SMM Aluminum Morning Meeting Summary]

Published: Oct 19, 2026 09:13 (GMT+8)
[Aluminum ingot destocking trend continues, macro front suppresses aluminum prices in the doldrums] On the macro front, rising expectations for US Fed interest rate hikes, a strong US dollar, and high US Treasury yields continue to weigh on nonferrous metals valuations. On the fundamentals side, production resumptions and new capacity launches ex-China continue to suppress short-term futures sentiment. Aluminum prices are expected to consolidate on a subdued note in the near term.

SMM Oct 19 Aluminum Morning Meeting Minutes:

Futures: SHFE aluminum closed at 23,315 yuan/mt, up 0.56%. Although the price rebounded to stand above the MA5 (23,246), it remained capped by the MA10 (23,440) and the dense cluster of medium and long-term moving averages below (MA30 = 23,972, MA60 = 23,824), with the overall moving average system maintaining a bearish alignment. The MACD indicator's DIF (-223.65) and DEA (-137.46) ran deep below the zero axis, with the green bar reaching -172.39. The bearish trend remained intact, and the short-term rebound was an oversold recovery. Trading volume shrank sharply to 74,500 lots (below the average volume), reflecting cautious market participation. The suggested core trading range for SHFE aluminum is 23,000-23,600. LME aluminum closed at $3,007/mt, down slightly by 0.03%. The price barely held near the MA5 (3,005.2), but remained far below the MA10 (3,044.1), MA30 (3,176.9), and MA60 (3,211.7), with the moving averages showing a steep bearish divergence and a clear medium-term downtrend. The MACD indicator's two lines (DIF = -66.32, DEA = -54.89) formed a death cross downward, with the green bar persisting, and bearish momentum dominated. The suggested core trading range for LME aluminum is 2,955-3,045.

Macro front: Fed Chairman Warsh said he would not prejudge the policy decision at the October FOMC meeting, nor would he signal the rate path for the remaining meetings this year. Warsh emphasized that the Fed has entered a new phase of policy communication and will no longer reveal its decision bias to the market in advance. Warsh said artificial intelligence is the most important innovation in the global economy in his lifetime, but he remains cautious about its short-term impact. Traders maintained expectations that the Fed will hold rates steady in October.

Fundamentals: Ex-China, production resumptions and new capacity additions of aluminum continued to advance, and expectations of ample supply in the forward curve persisted, weighing on futures sentiment. Although LME aluminum inventory had fallen to a historically low level of 238,400 mt, the macro environment remained pressured by expectations of tightening ex-China liquidity. In China, social inventory briefly built up during the National Day holiday before resuming its decline. According to SMM statistics, as of this Monday, domestic aluminum ingot social inventory destocked by 29,000 mt from last Thursday and by 44,000 mt from last Monday. After the post-holiday seasonal inventory buildup, inventory shifted back to destocking, confirming consumption resilience. In addition, China exported 656,000 mt of unwrought aluminum and aluminum semis in September, up 4.8% MoM from 626,000 mt in August, exceeding market expectations and showing that export consumption remained resilient. However, marginal changes warrant caution: the proportion of liquid aluminum in September fell short of expectations, and it is expected to pull back slightly in October, with casting ingot volume increasing MoM and aluminum ingot supply seeing marginal expansion.

Primary aluminum market: On the previous trading day, SHFE aluminum prices rebounded, and the price spread between the November and December contracts narrowed. In the central China market, downstream sentiment of rushing to buy amid continuous price rise and holding back amid price downturn was somewhat evident. Coupled with the Friday stockpiling cycle, market purchasing sentiment rebounded notably from the previous day, and trading activity recovered. The final transaction price range in the central China market was around a premium of 150-180 yuan/mt against the SHFE aluminum November contract.

Aluminum scrap: On the previous trading day, SMM A00 aluminum closed at 23,460 yuan/mt, up 200 yuan/mt WoW from the previous trading day. On the price spread front: On October 16, the price difference between A00 aluminum and mixed aluminum extrusion scrap free of paint in Foshan was about 2,214 yuan/mt, and the price difference between A00 aluminum and shredded aluminum tense scrap was about 715 yuan/mt. Supply side, tax audits in central China continued to deepen, with compliant invoiced aluminum scrap becoming increasingly scarce, and invoice-holding enterprises showed strong willingness to hold prices firm. Competition among enterprises was intense, with some only able to issue 20% of their invoice quotas, keeping effective supply tight. On the import front, this week, imported shredded aluminum prices at Ningbo Port and Tianjin Port were recorded at 20,970 yuan/mt (tax inclusive) and 21,020 yuan/mt (tax inclusive), respectively, down 100 yuan/mt WoW. In the short term, the aluminum scrap market is expected to hold up well, with limited downside. Supply side, the scope and intensity of tax audits remain the core variable, and the tight supply of compliant invoiced cargo is unlikely to ease. Demand side, downstream scrap utilization enterprises are operating at moderate rates during the peak season, and with supply and demand both tight, price support is expected to strengthen further. In addition, the price difference between A00 aluminum and aluminum scrap has narrowed again to a historical low, weakening the cost advantage of aluminum scrap and bringing the issue of primary aluminum substitution back to the table. Going forward, close attention should be paid to the spread of tax audits, changes in invoice quotas across regions, and downstream operating pace.

Secondary aluminum alloy: On the previous trading day, ADC12 market quotes were raised by 100 yuan/mt across the board. Driven by the rebound in aluminum prices and futures, market sentiment recovered somewhat, with some enterprises raising quotes accordingly, showing clear signs of repair after the earlier price pullback. However, downstream demand improvement remains insufficient, with purchases mainly need-based and limited acceptance of higher prices. Whether market transactions can follow through remains to be seen. Overall, short-term market sentiment has improved somewhat, but demand-side support remains relatively limited. Upside for prices is expected to depend on raw material cost changes and actual transaction conditions.

Comprehensive outlook: Macro front, rising expectations for US Fed interest rate hikes, a strong US dollar, and high US Treasury yields continued to weigh on nonferrous metal valuations. Fundamentals, production resumptions and new capacity additions ex-China continued to pressure short-term futures sentiment. Aluminum prices are expected to consolidate on a subdued note this week.

[The information provided is for reference only. This article does not constitute direct investment research or decision-making advice. Clients should make decisions prudently and not use this as a substitute for independent judgment. Any decisions made by clients are not related to SMM.]

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
【SMM Aluminum Flash News】Wanzhou Aluminum Project Nears Completion, Aims for December Launch
9 mins ago
【SMM Aluminum Flash News】Wanzhou Aluminum Project Nears Completion, Aims for December Launch
Read More
【SMM Aluminum Flash News】Wanzhou Aluminum Project Nears Completion, Aims for December Launch
【SMM Aluminum Flash News】Wanzhou Aluminum Project Nears Completion, Aims for December Launch
Amidst the clarion call for a decisive fourth quarter, the Wanzhou 250,000-ton-per-year aluminum sheet, strip, and foil project is progressing at full speed, having completed over 80% of the first phase of the project and aiming for completion and commissioning by the end of December this year. "Currently, the overall progress of the first phase of the 250,000-ton-per-year aluminum sheet, strip, and foil project exceeds 80%, with over 90% of the civil engineering completed and approximately 50% of the equipment installation finished," said Li Deyou, deputy plant manager of the aluminum sheet, strip, and foil project at Chongqing Gaofeng New Material Technology Co., Ltd. He told reporters that of the 15 furnaces and 12 casting and rolling mills in the casting and rolling workshop, 6 of each have been installed. Electrical installation and commissioning will follow, and the casting and rolling workshop is expected to be operational by the end of November. Equipment installation is also underway in the cold rolling workshop; the mechanical parts of the two cold rolling mills are 50% complete, and the cold rolling workshop is expected to complete joint commissioning by early December. The entire first phase of the project is expected to be completed and operational by the end of December. It is understood that the 250,000-ton-per-year aluminum sheet, strip, and foil project is one of three sub-projects of the Bosai Group's major industrial project in Wanzhou—a comprehensive aluminum utilization project with a total investment of 5.2 billion yuan—and is being implemented by Chongqing Gaofeng New Material Technology Co., Ltd. The project covers an area of ​​230 mu and is implemented in two phases: the first phase has a capacity of 150,000 tons and the second phase has a capacity of 100,000 tons. The main construction includes aluminum smelting, casting and rolling, cold rolling, heat treatment and finishing production lines, as well as supporting public facilities and environmental protection facilities.
9 mins ago
【SMM Aluminum Flash News】AISDI's $464M Aluminum Parts Plant to Boost Tianjin's Auto Industry and Create 500 Jobs
11 mins ago
【SMM Aluminum Flash News】AISDI's $464M Aluminum Parts Plant to Boost Tianjin's Auto Industry and Create 500 Jobs
Read More
【SMM Aluminum Flash News】AISDI's $464M Aluminum Parts Plant to Boost Tianjin's Auto Industry and Create 500 Jobs
【SMM Aluminum Flash News】AISDI's $464M Aluminum Parts Plant to Boost Tianjin's Auto Industry and Create 500 Jobs
AISDI (Tianjin) Automotive Parts Co., Ltd. is a specialized manufacturer focusing on the R&D and production of aluminum alloy automotive parts. Its products are widely applicable to new energy vehicles, construction machinery, and other fields, and it has already entered the global mainstream automotive supply chain system, providing long-term supporting services to many leading domestic automakers such as BYD and Great Wall Motors. The aluminum-magnesium alloy lightweight parts production base project signed this time covers a total area of ​​70 mu (approximately 4.7 hectares) with a total investment of 464 million yuan. Upon completion, the project will establish an integrated production line encompassing casting, machining, and testing, achieving an annual production capacity of 30,000 tons and an estimated annual sales revenue of 425 million yuan, directly creating approximately 500 local jobs. This project is a landmark achievement of the park's efforts to deepen its services to existing enterprises and promote the expansion and development of high-quality local companies. After its implementation, the project will further complete the key supporting links of the regional aluminum alloy industry, improve the industrial ecosystem layout, strengthen the synergistic linkage between upstream and downstream industries, and help Wuqing District accelerate the construction of a distinctive automotive parts industrial cluster, providing solid support for the high-quality development of advanced manufacturing in the region.
11 mins ago
【SMM Aluminum Flash News】Hindalco Cancels $125M Acquisition of US AluChem Due to Delays
12 mins ago
【SMM Aluminum Flash News】Hindalco Cancels $125M Acquisition of US AluChem Due to Delays
Read More
【SMM Aluminum Flash News】Hindalco Cancels $125M Acquisition of US AluChem Due to Delays
【SMM Aluminum Flash News】Hindalco Cancels $125M Acquisition of US AluChem Due to Delays
According to foreign media reports, Hindalco has cancelled its acquisition plan for US-based specialty alumina manufacturer AluChem. Aditya Birla Group (of which Hindalco is a subsidiary) stated in a press release that the share purchase agreement has been terminated due to prolonged closing delays beyond the control of both companies. The statement continued, “Hindalco’s overall strategy to scale up high-value, technology-driven value-added products (VAPs) in its specialty alumina business remains unchanged, and the company will continue to evaluate various opportunities, including those in the US, to align with this strategy.” The $125 million investment aimed to expand the production scale of ultra-low sodium alumina products.
12 mins ago
Register to Continue Reading
Gain access to the latest insights in metals and new energy
Already have an account?Sign in here