Phí gia công phôi nhôm Phật Sơn giảm nhẹ vào ngày 30 tháng 9

Đã xuất bản: Sep 30, 2026 13:11 (GMT+8)
Ngày 30 tháng 9, phôi nhôm Phật Sơn Φ90 được báo giá 24.350 NDT/tấn, phí gia công 100 NDT/tấn (giảm 10 NDT so với phiên giao dịch trước); Φ120 ở mức 24.300 NDT/tấn, phí gia công 50 NDT/tấn (giảm 10 NDT); Φ178 ở mức 24.300 NDT/tấn, phí gia công 50 NDT/tấn (giảm 10 NDT). Giá giao ngay nhôm A00 SMM (Phật Sơn) ở mức 24.250 NDT/tấn.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
【SMM Aluminum Flash News】Canyon Resources’ Minim Martap project faces uncertainty over funding and first shipment
6 phút trước
【SMM Aluminum Flash News】Canyon Resources’ Minim Martap project faces uncertainty over funding and first shipment
Đọc thêm
【SMM Aluminum Flash News】Canyon Resources’ Minim Martap project faces uncertainty over funding and first shipment
【SMM Aluminum Flash News】Canyon Resources’ Minim Martap project faces uncertainty over funding and first shipment
Canyon Resources’ plans to bring its Minim Martap bauxite project in Cameroon into production, have been thrown into fresh uncertainty after AFG Bank Cameroon suspended further drawdowns from the project’s syndicated financing facility. The bank suspended access to the remaining funds on August 24, 2026, pending a review of the project’s development schedule, financial model and underlying economic assumptions. The move comes as Canyon acknowledges that it will not meet its Phase 1 development timetable and has removed its previous first-shipment target without setting a new date. For a project that had been targeting its first bauxite shipment in the fourth quarter of 2026, the change is significant. Canyon has also moved to reduce non-essential spending while it works through the funding review.
6 phút trước
【SMM Aluminum Flash News】80Mt bauxite, 13 years later: Vedanta renews Niyamgiri mining push in Odisha
8 phút trước
【SMM Aluminum Flash News】80Mt bauxite, 13 years later: Vedanta renews Niyamgiri mining push in Odisha
Đọc thêm
【SMM Aluminum Flash News】80Mt bauxite, 13 years later: Vedanta renews Niyamgiri mining push in Odisha
【SMM Aluminum Flash News】80Mt bauxite, 13 years later: Vedanta renews Niyamgiri mining push in Odisha
Leading Indian aluminium producer Vedanta has renewed its push to revive bauxite mining at Odisha’s Niyamgiri hills, about 13 years after the proposed project was shelved. With Niyamgiri hosting around 80 million tonnes of bauxite reserves, the renewed proposal brings the resource potential of the Kalahandi-Rayagada belt back into focus. Vedanta Chairman Anil Agarwal discussed reopening the Niyamgiri bauxite mining project with Odisha Chief Minister Mohan Charan Majhi in Bhubaneswar on September 26. Agarwal mentioned that the discussion addressed employment opportunities for involved tribal communities. The state government also indicated that steps would be taken towards the necessary permissions.
8 phút trước
[Lượng nhôm phôi tồn kho duy trì ở mức cao; cắt giảm sản lượng tại Quảng Tây và Tân Cương, cùng với giá nhôm giảm, dẫn đến phân hóa phí gia công theo khu vực [Phân tích SMM]]
11 phút trước
[Lượng nhôm phôi tồn kho duy trì ở mức cao; cắt giảm sản lượng tại Quảng Tây và Tân Cương, cùng với giá nhôm giảm, dẫn đến phân hóa phí gia công theo khu vực [Phân tích SMM]]
Đọc thêm
[Lượng nhôm phôi tồn kho duy trì ở mức cao; cắt giảm sản lượng tại Quảng Tây và Tân Cương, cùng với giá nhôm giảm, dẫn đến phân hóa phí gia công theo khu vực [Phân tích SMM]]
[Lượng nhôm phôi tồn kho duy trì ở mức cao; cắt giảm sản lượng tại Quảng Tây và Tân Cương, cùng với giá nhôm giảm, dẫn đến phân hóa phí gia công theo khu vực [Phân tích SMM]]
Theo thống kê của SMM, tính đến ngày 30 tháng 9, tồn kho phôi nhôm tại các khu vực tiêu thụ chính ở Trung Quốc đạt 149.500 tấn, tăng 500 tấn so với thứ Năm tuần trước và giảm 5.000 tấn so với thứ Hai tuần này, tồn kho duy trì ở mức cao và nhìn chung gần như không đổi.
11 phút trước