Stainless Steel Futures Prices Fell, Spot Prices Droped Synchronously [SMM Stainless Steel Spot Daily Review]

Đã xuất bản: Aug 8, 2024 09:29
Nguồn: SMM
On August 7, according to an SMM survey, stainless steel futures continued to decline.

On August 7, according to an SMM survey, stainless steel futures continued to decline. In the morning, Tsingshan Group continued to lower HRC and CRC guidance prices. The benchmark price for Hongwang's #304 CRC was adjusted to 13,700 yuan/mt, and the price for HRC was adjusted to 13,400 yuan/mt. During the day, there were many inquiries in the spot market but few actual transactions, and the downward trend in the night session caused a large number of low-price warrants to suppress transactions. It is expected that spot prices will continue to be under pressure. In the morning, #304 CRC in Wuxi was quoted at 13,800-14,200 yuan/mt, and #304 HRC in Wuxi was quoted at 13,400-13,450 yuan/mt. #316L CRC in Wuxi was quoted at 24,800-25,500 yuan/mt. #201J1 CRC in Wuxi was quoted at 8,500-8,700 yuan/mt. #430 CRC in Wuxi was quoted at 8,000-8,100 yuan/mt. At 10:30 AM, the SHFE SS2409 contract price was 13,940 yuan/mt, and stainless steel spot premiums in Wuxi were 30-430 yuan/mt. (Spot cut edge = uncut edge + 170 yuan/mt).

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
[SMM Stainless Steel Flash] EU Melt-and-Pour Rule Set to Reshape Stainless Steel Supply Chain Traceability
9 phút trước
[SMM Stainless Steel Flash] EU Melt-and-Pour Rule Set to Reshape Stainless Steel Supply Chain Traceability
Đọc thêm
[SMM Stainless Steel Flash] EU Melt-and-Pour Rule Set to Reshape Stainless Steel Supply Chain Traceability
[SMM Stainless Steel Flash] EU Melt-and-Pour Rule Set to Reshape Stainless Steel Supply Chain Traceability
From October 1, 2026, EU importers must declare and substantiate where imported steel was originally melted and poured, typically through a mill test certificate containing the melt-and-pour country and heat number. The rules do not alter existing quota volumes or restrict market access from specific countries, and a one-year transition period allows alternative documentation where MTCs are unavailable. However, from October 2027, the Commission will incorporate collected melt-and-pour data into country-specific quota allocation decisions, with a further assessment by June 2028 on whether the melt-and-pour country should itself become a basis for quota access. The rules carry significant implications for Asia's stainless steel supply chains, where cross-border processing is widespread. Indonesia exported approximately 330,000 tonnes of stainless steel slabs to Italy in 2025, with EU-bound shipments already exceeding 123,000 tonnes this year; as slabs currently fall outside trade measure scope, the route of importing Indonesian semi-finished slabs for local processing may face greater scrutiny as melt-and-pour traceability deepens.
9 phút trước
【SMM Tin nhanh Niken】Indonesia xác nhận chi tiết thực hiện nới lỏng DHE SDA
16 giờ trước
【SMM Tin nhanh Niken】Indonesia xác nhận chi tiết thực hiện nới lỏng DHE SDA
Đọc thêm
【SMM Tin nhanh Niken】Indonesia xác nhận chi tiết thực hiện nới lỏng DHE SDA
【SMM Tin nhanh Niken】Indonesia xác nhận chi tiết thực hiện nới lỏng DHE SDA
Indonesia đã xác nhận chi tiết triển khai Điều 18A của Quy định Chính phủ (PP) số 21/2026, có hiệu lực đối với tờ khai hải quan xuất khẩu (PPE) từ ngày 1 tháng 9 năm 2026. Chính phủ xác định 64 nhà xuất khẩu khai khoáng, tương đương khoảng 12% trong số 537 nhà xuất khẩu được rà soát, hiện đáp ứng tiêu chí đủ điều kiện. Nhà xuất khẩu đủ điều kiện phải là pháp nhân PT của Indonesia, hoạt động trong lĩnh vực khai khoáng và có ít nhất một cổ đông đến từ các quốc gia được chỉ định gồm Mỹ, Trung Quốc, Hồng Kông, Úc hoặc Canada, nắm giữ tối thiểu 10% cổ phần. Danh sách đủ điều kiện sẽ được rà soát hằng tháng. Chính phủ cũng chỉ định 15 ngân hàng ngoại hối để ký gửi DHE SDA theo Điều 18A, gồm 5 ngân hàng quốc doanh và 10 ngân hàng ngoài quốc doanh. Điều này cho phép các nhà xuất khẩu đủ điều kiện ký gửi DHE SDA bắt buộc tại các ngân hàng ngoài quốc doanh được chỉ định, mang lại sự linh hoạt cao hơn trong quản lý nguồn thu xuất khẩu.
16 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (ngày 03/09)
17 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (ngày 03/09)
Đọc thêm
Dữ liệu: Diễn biến thị trường SHFE, DCE (ngày 03/09)
Dữ liệu: Diễn biến thị trường SHFE, DCE (ngày 03/09)
Bảng dưới đây cho thấy biến động giá kim loại đen và kim loại màu trên SHFE và DCE vào ngày 03/09/2026
17 giờ trước