SMM Morning Comment For SHFE Base Metals On August 5

Đã xuất bản: Aug 5, 2024 10:14
Nguồn: SMM
Last Friday night, LME copper opened at $9,105.5/mt, and experienced wide fluctuations from the beginning to the middle of the session, reaching a high of $9,144.5/mt.

SHANGHAI, August 5 (SMM) –

Copper

Last Friday night, LME copper opened at $9,105.5/mt, and experienced wide fluctuations from the beginning to the middle of the session, reaching a high of $9,144.5/mt. It then declined towards the end of the trading session, hitting a low of $9,037/mt, and finally closed at $9,087/mt, up 0.94%. The trading volume reached 22,000 lots, and the open interest reached 292,000 lots. Last Friday night, the most-traded SHFE 2408 copper contract opened at 73,680 yuan/mt, reached a high of 73,980 yuan/mt at the beginning, then fluctuated downward, hitting a low of 72,880 yuan/mt at the end of the trading session, and finally closed at 73,220 yuan/mt, down 0.97%. The trading volume reached 81,000 lots, and the open interest reached 179,000 lots. Macro front, last Friday, sharply lower-than-expected non-farm payrolls data intensified market concerns about recession prospects, rapidly boosting global market risk aversion sentiment, and copper prices also showed a significant decline. Attention should be paid to the PMI data to be released this week, which will provide guidance for market sentiment. Fundamentally, copper prices fluctuated significantly, with strong market wait-and-see sentiment. With the consumption off-season, market demand was not strong. In terms of prices, under the influence of weak macro sentiment, copper prices are expected to barely rise.

Aluminum

Market: On Friday night, the most-traded SHFE aluminum 2409 contract opened at 19,135 yuan/mt, reaching a high of 19,195 yuan/mt and a low of 18,905 yuan/mt, and closed at 18,995 yuan/mt, down 225 yuan/mt, a decrease of 1.17%. The previous trading day, LME aluminum opened at $2,279/mt, with a high of $2,304/mt and a low of $2,257/mt, and closed at $2,263/mt, down $10.5/mt, a decrease of 0.46%.

Summary: On the macro level, the Chinese government continues to boost the domestic economy, the US Fed's rate cut expectations are increasing, global liquidity is becoming more abundant, together with the escalation of regional conflicts, providing some upward momentum for aluminum prices. However, on the fundamentals side, aluminum still shows a pattern of supply growth and weak demand. The production of aluminum in July is expected to increase to around 3.68 million mt, and social inventory remains at a high level for the same period, putting pressure on aluminum prices. In the short term, both macro and fundamental factors are mixed, and aluminum prices are expected to fluctuate widely.

Lead

Last Friday, LME lead opened at $2,054/mt and consolidated during the Asian session. Entering the European session, bears increased their positions, causing LME lead to fluctuate downward to a low of $2,018/mt. It closed at $2,035/mt, a decrease of 0.76%.

Last Friday night, the most-traded SHFE 2409 lead contract opened at 18,160 yuan/mt, briefly touched a high of 18,205 yuan/mt at the beginning of the session, and then continued to decline as bears increased their positions. SHFE lead fluctuated downward, reaching a low of 17,905 yuan/mt in the night session, and closed at 17,910 yuan/mt, a decrease of 2.13%.

Zinc

Last Friday, LME zinc opened at $2,676/mt. At the beginning of the session, LME zinc fluctuated upwards, trading above the average daily line. During the European trading session, it peaked at $2,717/mt. Subsequently, bears targeted the high levels, causing LME zinc to move downwards near the average daily line. Entering the night session, LME zinc accelerated its decline, hitting a low of $2,648/mt at the end of the trading session, and finally closed at $2,662/mt, down $18.5/mt or 0.69%. Trading volume decreased to 9,792 lots, and open interest increased by 2,773 lots to 221,000 lots. Last Friday, LME zinc recorded a long upper shadow bearish candlestick, with the 10-day moving average forming resistance. LME zinc inventory decreased by 2,125 mt to 232,550 mt, a drop of 0.91%, continuing its downward trend. Despite the US employment data being significantly lower-than-expected and the US Fed's rate cut expectations strengthening, poor US economic data heightened recession concerns, causing LME zinc to rise and then fall back.

Last Friday, the most-traded SHFE zinc contract 2409 opened lower at 22,860 yuan/mt. At the beginning of the session, after a brief high of 22,885 yuan/mt due to a tug-of-war between long and short positions, increased short positions pressured SHFE zinc to fall to a low of 22,395 yuan/mt. After a slight pullback at the end of the trading session, it closed at 22,570 yuan/mt, down 290 yuan/mt or 1.27%. Trading volume decreased to 105,000 lots, and open interest increased by 3,395 lots to 87,587 lots. Last Friday, SHFE zinc recorded a bearish candlestick, with the KDJ indicator expanding downwards. Due to poor overseas economic data, SHFE zinc traded weakly. However, the supply side still supported zinc prices, limiting the extent of the decline.

Tin

SHFE 2409 tin contract closed at 247,800 yuan/mt in the night session last Friday, down 490 yuan/mt, a decrease of 0.2%.

Last Friday morning, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at premiums of 500-1,500 yuan/mt over SHFE 2409 tin contract, versus premiums of 400-1,500 yuan/mt for delivery brands and premiums of 700-1,100 yuan/mt for Yunxi brand. Last Friday, tin prices saw a slight rebound, with most downstream producers adopting a wait-and-see attitude. Most companies' inventories increased compared to earlier periods, leading to low purchasing willingness. Overall, the spot market remained sluggish last Friday.

Nickel

Last week, SHFE nickel prices showed a trend of first rising and then falling. They increased from 126,240 yuan/mt on Monday to a peak of 133,960 yuan/mt during the week, before falling back to around 130,000 yuan/mt. Last week, nickel prices were significantly influenced by macro factors, generally rising from a week ago. In July, nickel prices overall showed a downward trend, once dropping to the lowest point since Q3 last year. Due to the decline in nickel prices, there was a risk of losses in related sectors. The renewed favourable macro front provided upward momentum for nickel prices. On the macro front, the US GDP data exceeded expectations, and Japan's interest rate hike also had an impact. After a continuous decline, macro sentiment rebounded. Additionally, last week, the US Fed monetary policy meeting announced that the target range for the federal funds rate would remain unchanged at 5.25% to 5.5%. The Fed hinted that if progress continues in fighting inflation, it might announce a rate cut at the September meeting this year. Fed Chairman Powell stated that if the relevant data meets expectations, the Fed might gradually cut rates by the end of the year, making the US July unemployment rate and non-farm payrolls data to be released last Friday particularly crucial. If the data falls short of expectations, it could impact nickel prices this week. On the fundamentals side, the rise in nickel prices last week led to weaker purchasing sentiment among downstream. However, traders were more active in receiving goods, mainly as spot premiums/discounts declined and some end-users conducted hedging operations. Due to the decline in nickel prices at the beginning of the week, the import window opened on Wednesday night, and some traders began purchasing overseas nickel plates from bonded areas. Overall, the favourable macro sentiment continued to ferment, and the supply-demand mismatch still existed, with weak downstream demand. However, recent macro factors had a greater impact on nickel prices. Therefore, it is expected that SHFE nickel prices will continue to fluctuate upward this week.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
11 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
Đọc thêm
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG Metals công bố vào ngày 1 tháng 9 rằng mỏ Gediktepe tại Thổ Nhĩ Kỳ đã sản xuất lô tinh quặng đồng đầu tiên vào ngày 31 tháng 8, đánh dấu giai đoạn tăng tốc bắt đầu. Công ty sẽ tăng dần công suất xử lý và tối ưu hóa hiệu suất nhà máy, mục tiêu đạt sản lượng tối đa vào cuối năm 2026. Mục tiêu sản lượng hàng năm ổn định của Gediktepe là 20.000–25.000 tấn quy đổi đồng. Thông báo đầy đủ cũng xác nhận mỏ đã sản xuất lô tinh quặng kẽm đầu tiên vào tháng 8 năm 2026, mặc dù ngày cụ thể và khối lượng không được tiết lộ. SMM ước tính sản lượng kẽm trong tinh quặng của mỏ vào khoảng 10.000–15.000 tấn kẽm hàm lượng trong năm 2026.
11 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
11 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
Đọc thêm
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
11 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
13 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Đọc thêm
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Epiroc đã giành được đơn hàng trị giá khoảng 610 triệu SEK (64 triệu USD) từ MMG Limited và các nhà thầu khai thác mỏ của họ là China Huaye và 23MCC để cung cấp thiết bị khai thác hầm lò phục vụ việc mở rộng mỏ đồng Khoemacau tại Botswana. Đơn hàng bao gồm máy khoan gương, máy khoan sản xuất, máy khoan lắp neo cáp, máy xúc và xe tải khai thác hầm lò, cùng với hệ thống điều khiển từ xa, phụ tùng thay thế, đào tạo và hỗ trợ kỹ thuật tại hiện trường. Số thiết bị này sẽ hỗ trợ dự án mở rộng Khoemacau đang triển khai của MMG, nhằm nâng công suất sản xuất hàng năm từ khoảng 60.000 tấn lên 130.000 tấn đồng kim loại trong tinh quặng. Dự án bao gồm việc xây dựng một nhà máy chế biến mới công suất 4,5 triệu tấn/năm, nâng tổng công suất nghiền lên hơn 8 triệu tấn/năm, cùng với việc phát triển các khu vực Zone 5 North, Mango và Zeta North-East. Lô tinh quặng đồng đầu tiên từ dự án mở rộng dự kiến sẽ ra lò vào nửa đầu năm 2028. Epiroc cho biết việc bàn giao đội thiết bị hầm lò mới sẽ bắt đầu vào quý IV năm 2026 và dự kiến hoàn thành vào quý II năm 2028, về cơ bản phù hợp với tiến độ mở rộng. Đội thiết bị được đặt hàng bao gồm máy khoan gương Boomer, máy khoan sản xuất Simba, máy khoan lắp neo cáp Cabletec, máy xúc Scooptram và xe tải hầm lò Minetruck, trong đó một số thiết bị được trang bị cho vận hành tự động hóa và điều khiển từ xa. Đơn hàng thiết bị này đánh dấu một cột mốc triển khai nữa của dự án mở rộng Khoemacau đã được phê duyệt, chứ không phải là một mục tiêu sản xuất mới. Với hoạt động mua sắm đang tiến triển và việc bàn giao thiết bị được lên lịch đến quý II năm 2028, dự án tiếp tục tiến tới kế hoạch của MMG nhằm nâng công suất đồng trong tinh quặng lên 130.000 tấn mỗi năm. Đợt mở rộng này thể hiện mức tăng đáng kể theo kế hoạch về công suất sản xuất đồng của Khoemacau tại Vành đai đồng Kalahari của Botswana.
13 giờ trước