SMM Morning Comment For SHFE Base Metals On July 31

Đã xuất bản: Jul 31, 2024 09:36
Nguồn: SMM
LME copper opened at $8,954/mt overnight.

SHANGHAI, July 31 (SMM) –

Copper

LME copper opened at $8,954/mt overnight, experienced wide fluctuations initially and hit a session low of $8,915/mt. It then rebounded, reaching a session high of $9,046.5/mt, and finally closed at $9,031/mt, up 0.07%. Trading volume reached 19,000 lots, and open interest reached 291,000 lots. Overnight, the most-traded SHFE 2409 copper contract opened at 73,040 yuan/mt and initially fluctuated downward, hitting a session low of 72,740 yuan/mt. It then rebounded, reaching a session high of 73,580 yuan/mt, and finally closed at 73,510 yuan/mt, up 0.04%. Trading volume reached 70,000 lots, and open interest reached 181,000 lots. Macro front, several Japanese media outlets reported late at night that the Bank of Japan would raise interest rates by 15 basis points at the meeting ending today, exceeding market expectations. Meanwhile, as the market awaited, the US Fed's spokesperson indicated that a rate cut in July was almost impossible, but changes in the Fed's statement should be closely monitored, which might suggest an increased possibility of a rate cut in September. Although copper prices opened lower overnight due to overseas inventories and market uncertainties, they ultimately closed slightly higher. Fundamentals side, copper prices continued to run weak, but downstream trading sentiment did not significantly rebound for fear of falling prices. Supply side, the inflow of imported copper is expected to decrease in early August. Overall, attention should be paid to the Bank of Japan's interest rate decision today. If it raises rates as expected, copper prices may be boosted.

Aluminum

Market: The most-traded SHFE aluminum 2409 contract opened at 18,840 yuan/mt overnight, reaching a high of 19,040 yuan/mt and a low of 18,790 yuan/mt, and closed at 19,010 yuan/mt, up 60 yuan/mt, or 0.32%. The previous trading day, LME aluminum opened at $2,249.5/mt, hit a high of $2,253/mt and a low of $2,209.5/mt, and closed at $2,238/mt, down $9/mt, or 0.40%.

Summary: On the macro side, global market liquidity is gradually increasing, and regional conflict remain unpredictable. On the fundamentals side, domestic aluminum supply continues to grow, with a significant YoY increase in net imports of primary aluminum. Downstream aluminum processing and end-user demand are in the off-season, with the operating rate in the aluminum processing industry hitting a low point, and some stimulus measures have yet to show effect. Social inventory is at a three-year high for the same period, and spot discounts persist. On the cost side, some material prices are at risk of falling. In the short term, aluminum fundamentals continue to exert downward pressure on aluminum prices, while macro fluctuations are relatively large. In the short term, attention should be paid to the impact of macro changes on aluminum prices.

Lead

Overnight, LME lead opened at $2,038.5/mt, fluctuated downward during the Asian session, dipped to $2,030/mt in the European session, and after a slight consolidation, closed at $2,035.5/mt, down $27/mt, a decrease of 1.31%.

Overnight, the most-traded SHFE 2409 lead contract opened at 18,460 yuan/mt, slightly consolidated at the beginning of the session, and then climbed to a high of 18,970 yuan/mt. It slightly fell to around 18,800 yuan/mt, and closed at 18,835 yuan/mt, up 145 yuan/mt, an increase of 0.78%.

Zinc

Overnight, LME zinc opened at $2,641/mt. After the opening, LME zinc fluctuated widely around the average daily line, reaching a high of $2,651/mt during the midday session. It then retreated and fell to a low of $2,615/mt. At the end of the trading session, LME zinc rose again and closed at $2,650.5/mt, up $11.5/mt, or 0.44%. The trading volume increased to 9,714 lots, and the open interest rose by 3,355 lots to 221,000 lots. LME zinc inventory decreased by 2,125 mt to 238,425 mt, a drop of 0.88%. Overnight, LME zinc recorded a bullish candlestick, with the 5-day moving average forming resistance above. Although the US June JOLTs job openings were higher than expected and the previous value was revised upwards, indicating that the labour market remained resilient, the market's optimistic sentiment towards a US Fed rate cut in September persisted, and LME zinc continued to fluctuate.

Overnight, the most-traded SHFE zinc 2409 contract opened at 22,450 yuan/mt. At the beginning of the session, SHFE zinc fell to 22,360 yuan/mt, then fluctuated upwards above the average daily line, reaching a high of 22,685 yuan/mt. Subsequently, SHFE zinc retreated to near the average daily line, and at the end of the trading session, it rose again and closed at 22,650 yuan/mt, up 155 yuan/mt, or 0.69%. The trading volume increased to 97,354 lots, and the open interest decreased by 1,423 lots to 92,536 lots. Overnight, SHFE zinc recorded a bullish candlestick, with the lower Bollinger Bands providing support. Recently, the non-ferrous metals market prices has shown a weak trend. However, on July 30, the Central Committee of the Communist Party of China held a meeting, proposing to expand domestic demand with a focus on boosting consumption. Market sentiment was somewhat lifted, and SHFE zinc prices center rose. Attention should be paid to the subsequent performance of domestic consumption.

Tin

In the night session yesterday, the most-traded SHFE tin futures contract closed at 244,360 yuan/mt, down by 70 yuan/mt, a decrease of 0.03%, with a high of 244,980 yuan/mt and a low of 237,830 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at premiums of 500-1,500 yuan/mt over SHFE 2409 tin contract, versus premiums of 500-1,500 yuan/mt for delivery brands, and premiums of 700-1,100 yuan/mt for Yunxi brand. Tin prices fluctuated downward yesterday, with a slight rebound in the night session. Most downstream producers made small restocking purchases. Overall, the spot market remained active yesterday.

Nickel

On July 30, Jinchuan nickel was quoted at a premium of 1,900-2,000 yuan/mt, with an average of 1,950 yuan/mt, down 200 yuan/mt compared to the previous trading day. Norilsk nickel was quoted at a discount of 0-300 yuan/mt, with an average of 150 yuan/mt, down 225 yuan/mt compared to the previous trading day. In the morning, the market fluctuated downward, and spot premiums fell significantly as the contract that quotes are based on changed (the current futures structure is contango). Nickel briquette prices were 125,600-125,900 yuan/mt, an increase of 450 yuan/mt compared to the previous trading day. The price spread between nickel briquette and nickel sulphate was about 2,659 yuan/mt (nickel sulphate prices were 2,659 yuan/mt higher than nickel briquette prices).

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
13 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
Đọc thêm
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG Metals công bố vào ngày 1 tháng 9 rằng mỏ Gediktepe tại Thổ Nhĩ Kỳ đã sản xuất lô tinh quặng đồng đầu tiên vào ngày 31 tháng 8, đánh dấu giai đoạn tăng tốc bắt đầu. Công ty sẽ tăng dần công suất xử lý và tối ưu hóa hiệu suất nhà máy, mục tiêu đạt sản lượng tối đa vào cuối năm 2026. Mục tiêu sản lượng hàng năm ổn định của Gediktepe là 20.000–25.000 tấn quy đổi đồng. Thông báo đầy đủ cũng xác nhận mỏ đã sản xuất lô tinh quặng kẽm đầu tiên vào tháng 8 năm 2026, mặc dù ngày cụ thể và khối lượng không được tiết lộ. SMM ước tính sản lượng kẽm trong tinh quặng của mỏ vào khoảng 10.000–15.000 tấn kẽm hàm lượng trong năm 2026.
13 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
14 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
Đọc thêm
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
14 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
16 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Đọc thêm
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Epiroc đã giành được đơn hàng trị giá khoảng 610 triệu SEK (64 triệu USD) từ MMG Limited và các nhà thầu khai thác mỏ của họ là China Huaye và 23MCC để cung cấp thiết bị khai thác hầm lò phục vụ việc mở rộng mỏ đồng Khoemacau tại Botswana. Đơn hàng bao gồm máy khoan gương, máy khoan sản xuất, máy khoan lắp neo cáp, máy xúc và xe tải khai thác hầm lò, cùng với hệ thống điều khiển từ xa, phụ tùng thay thế, đào tạo và hỗ trợ kỹ thuật tại hiện trường. Số thiết bị này sẽ hỗ trợ dự án mở rộng Khoemacau đang triển khai của MMG, nhằm nâng công suất sản xuất hàng năm từ khoảng 60.000 tấn lên 130.000 tấn đồng kim loại trong tinh quặng. Dự án bao gồm việc xây dựng một nhà máy chế biến mới công suất 4,5 triệu tấn/năm, nâng tổng công suất nghiền lên hơn 8 triệu tấn/năm, cùng với việc phát triển các khu vực Zone 5 North, Mango và Zeta North-East. Lô tinh quặng đồng đầu tiên từ dự án mở rộng dự kiến sẽ ra lò vào nửa đầu năm 2028. Epiroc cho biết việc bàn giao đội thiết bị hầm lò mới sẽ bắt đầu vào quý IV năm 2026 và dự kiến hoàn thành vào quý II năm 2028, về cơ bản phù hợp với tiến độ mở rộng. Đội thiết bị được đặt hàng bao gồm máy khoan gương Boomer, máy khoan sản xuất Simba, máy khoan lắp neo cáp Cabletec, máy xúc Scooptram và xe tải hầm lò Minetruck, trong đó một số thiết bị được trang bị cho vận hành tự động hóa và điều khiển từ xa. Đơn hàng thiết bị này đánh dấu một cột mốc triển khai nữa của dự án mở rộng Khoemacau đã được phê duyệt, chứ không phải là một mục tiêu sản xuất mới. Với hoạt động mua sắm đang tiến triển và việc bàn giao thiết bị được lên lịch đến quý II năm 2028, dự án tiếp tục tiến tới kế hoạch của MMG nhằm nâng công suất đồng trong tinh quặng lên 130.000 tấn mỗi năm. Đợt mở rộng này thể hiện mức tăng đáng kể theo kế hoạch về công suất sản xuất đồng của Khoemacau tại Vành đai đồng Kalahari của Botswana.
16 giờ trước
SMM Morning Comment For SHFE Base Metals On July 31 - Shanghai Metals Market (SMM)