Monthly operating rate at China galvanising plants

Đã xuất bản: Apr 16, 2024 18:24
According to the new SMM survey sample with a total capacity of 39.02 million mt/year, the average operating rate at galvanising plants stood at 55.47% in March, up 30.8 percentage points from the previous month and down 8.05 percentage points from the same period last year. Output was 1.80 million mt.

According to the new SMM survey sample with a total capacity of 39.02 million mt/year, the average operating rate at galvanising plants stood at 55.47% in March, up 30.8 percentage points from the previous month and down 8.05 percentage points from the same period last year. Output was 1.80 million mt.

According to the old sample, the average operating rate was 55.03% in March, up 30.52 percentage points month on month but down 19.3 percentage points year on year (involving a capacity of 10.81 million mt and the output was 495,900 mt).

In February most companies stopped production for the Chinese New Year holiday. In addition, traders and some companies replenished their inventories after the holiday. Therefore, operating rates increased significantly. Orders in March were lower than expected. Most galvanising enterprises purchased on demand, and the inventory of zinc ingots decreased. Most galvanising enterprises resumed normal production in early March, but orders were weak due to the impact of the Two Sessions and environmentally-driven production restrictions as well as the weakening of ferrous metals prices. As such, the average operating rate decreased year-on-year.

The average operating rate of large producers with an annual capacity above 500,000 mt jumped 34.34 percentage points month-on-month to 59.73%. According to SMM survey, companies basically resumed work in March, and the number of working days increased. Most of the large galvanising factories are galvanised pipe factories. Although they were affected by the Two Sessions and environmental protection control, the impact was insignificant. Most companies were producing normally, but the prices of ferrous metals were weak in March and orders were lower than expected, resulting in a large inventory of finished products at large galvanised pipe factories. The production of large galvanised structural parts factories gradually got back on track, but due to industry competition, their profits were low.

The average operating rate of mid-sized producers with annual capacity between 100,000-500,000 mt rose 25.40 percentage points on the month to 46.50%. Most medium-sized enterprises were galvanised structural parts plants, and they resumed production in March. Orders from steel tower companies were stable and the delivery was urgent, ensuring full production; but other sectors did not see any new orders after the CNY holiday.

The average operating rate at small enterprises with an annual capacity of and below 10,000 mt rose by 17.08 percentage points from the previous month to 44.62%. The production time in March increased significantly compared with February, and production basically recovered in March. However, small enterprises were mainly galvanised structural parts enterprises whose new orders were poor, and their operating rates underperformed those of medium and large enterprises.

The average operating rate is estimated at 57.74% in April, up 2.27 percentage points month on month, according to the production plans. In April, the prices of ferrous metals rebounded. Currently, traders need to replenish stocks, and orders are expected to increase significantly. The silent period of the photovoltaic sector has basically ended, and orders are expected to recover in April. The tower sector remains stable.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Bunker Hill thúc đẩy tái khởi động mỏ chì-kẽm, mục tiêu sản xuất thương mại vào cuối năm 2026
8 giờ trước
Bunker Hill thúc đẩy tái khởi động mỏ chì-kẽm, mục tiêu sản xuất thương mại vào cuối năm 2026
Đọc thêm
Bunker Hill thúc đẩy tái khởi động mỏ chì-kẽm, mục tiêu sản xuất thương mại vào cuối năm 2026
Bunker Hill thúc đẩy tái khởi động mỏ chì-kẽm, mục tiêu sản xuất thương mại vào cuối năm 2026
Bunker Hill Mining ngày 1/9 thông báo mỏ chì-kẽm Bunker Hill tại Idaho, Mỹ đã sản xuất tinh quặng chì và kẽm đầu tiên vào cuối tháng 6/2026. Hoạt động hiện đang trong giai đoạn tăng công suất, với việc tối ưu hóa liên tục các hoạt động khai thác hầm lò và chế biến. Nhà máy chế biến có công suất thiết kế 1.800 tấn/ngày, với tổng sản lượng kế hoạch hàng năm khoảng 85.000 tấn tinh quặng kẽm và tinh quặng chì chứa bạc. Công ty dự kiến bổ sung vốn lưu động thông qua tài trợ dự phòng và các thỏa thuận trả trước tinh quặng, mục tiêu đạt sản xuất thương mại toàn phần vào cuối năm 2026. SMM dự báo sản lượng năm 2026 của mỏ khoảng 25.000 tấn kẽm trong tinh quặng và 10.000–15.000 tấn chì trong tinh quặng, tính theo hàm lượng kim loại. Trong khi đó, hoạt động khoan ngầm gần đây tại khu khoáng hóa Cate-8 ghi nhận hàm lượng mẫu tối đa 41,1% chì và 7,41% kẽm. Công ty đang đánh giá tính khả thi của việc đưa khu vực này vào kế hoạch khai thác ngắn hạn. Khi công suất tăng dần, mỏ dự kiến sẽ cung cấp thêm nguồn cung chì và kẽm cho Bắc Mỹ.
8 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
11 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
Đọc thêm
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG Metals công bố vào ngày 1 tháng 9 rằng mỏ Gediktepe tại Thổ Nhĩ Kỳ đã sản xuất lô tinh quặng đồng đầu tiên vào ngày 31 tháng 8, đánh dấu giai đoạn tăng tốc bắt đầu. Công ty sẽ tăng dần công suất xử lý và tối ưu hóa hiệu suất nhà máy, mục tiêu đạt sản lượng tối đa vào cuối năm 2026. Mục tiêu sản lượng hàng năm ổn định của Gediktepe là 20.000–25.000 tấn quy đổi đồng. Thông báo đầy đủ cũng xác nhận mỏ đã sản xuất lô tinh quặng kẽm đầu tiên vào tháng 8 năm 2026, mặc dù ngày cụ thể và khối lượng không được tiết lộ. SMM ước tính sản lượng kẽm trong tinh quặng của mỏ vào khoảng 10.000–15.000 tấn kẽm hàm lượng trong năm 2026.
11 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (02/09)
14 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (02/09)
Đọc thêm
Dữ liệu: Diễn biến thị trường SHFE, DCE (02/09)
Dữ liệu: Diễn biến thị trường SHFE, DCE (02/09)
Bảng dưới đây cho thấy biến động giá kim loại đen và kim loại màu trên SHFE và DCE vào ngày 02/09/2026
14 giờ trước