Stainless steel output in January fell 4.05% month-on-month and is expected to decline by 7.22% month-on-month under the influence of the Spring Festival in February!

Đã xuất bản: Feb 4, 2024 10:51
Nguồn: SMM
[SMM data: stainless steel output in January decreased by 4.05% month-on-month and is expected to decrease by 7.22% month-on-month under the influence of the Spring Festival in February] According to SMM research, the national stainless steel output in January 2024 totaled about 2.893 million tons, a decrease of about 4.05% month-on-month and a year-on-year increase of about 24.34%. Among them, the output of 200 series stainless steel was about 687,000 tons, a decrease of about 16.78% month-on-month and an increase of about 3% year-on-year......

According to SMM research, the national stainless steel output in January 2024 totaled about 2.893 million tons, a decrease of about 4.05% month-on-month and a year-on-year increase of about 24.34%. Among them, the output of 200 series stainless steel was about 687,000 tons, a decrease of about 16.78% month-on-month and an increase of about 3% year-on-year; The output of 300 series stainless steel was about 1.581 million tons, a decrease of about 1.31% month-on-month and an increase of about 25.41% year-on-year; The output of 400 series stainless steel was about 625,000 tons, an increase of about 6.38% month-on-month and a year-on-year increase of about 56.64%. In addition, Indonesia's stainless steel output totaled about 380,000 tons in January, a decrease of about 7.32% month-on-month and a year-on-year increase of about 35.71%. In January, after New Year's Day, the stainless steel disk opened low and fluctuated, and the SS contract rose to 14,400 yuan/ton, and the stainless steel transaction atmosphere was active. Although it has entered the seasonal maintenance period, 300 series stainless steel production enterprises maintain production, and some steel mills have maintained the level of December due to a slight reduction in maintenance output. The 200 series stainless steel plants in North China, which are mainly used for scrap stainless steel smelting, were affected by the production capacity compliance inspection, and the production of 200 series stainless steel was affected by the production capacity compliance inspection, and the output of 200 series stainless steel was about 40,000 tons, coupled with the centralized maintenance of some steel mills in Guangxi, the output of 200 series 1 decreased by about 138,200 tons, a decrease of about 16.78% from the previous month. The output of the 400 series has climbed, and the annual output of state-owned steel mills in December has declined slightly, and the overall resumption of production in January has increased by about 37,500 tons compared with December. In February, entering the Spring Festival holiday, some domestic steel mills carried out routine maintenance during the Spring Festival, and the output declined compared with January for only 29 days in February. Due to the good superposition of steel mills' February orders, the current steel mills have a small profit margin in the production of stainless steel, and the overall maintenance impact is expected to be less. Abroad, stainless steel in the first quarter is still in the off-season of consumption, Indonesian steel mills adjusted the pace of production, output slightly lower, in February is expected to Indonesian stainless steel output decreased by about 2.63% month-on-month. It is estimated that the domestic stainless steel output in February will be about 2.684 million tons, a decrease of 7.22% from the previous month. Among them, the output of 200 series stainless steel was about 721,000 tons, an increase of about 4.95% month-on-month; The output of 300 series stainless steel was about 1.377 million tons, a decrease of about 12.9% from the previous month; The output of 400 series stainless steel was about 586,000 tons, a decrease of about 6.24% from the previous month.

For more information, please contact account manager: E-mail: zhuoxuanli@smm.cn / Whatsapp: +33 603911348

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
[SMM Tin nhanh Thép không gỉ] Quy định nấu chảy và rót của EU sẽ định hình lại khả năng truy xuất nguồn gốc chuỗi cung ứng thép không gỉ
4 giờ trước
[SMM Tin nhanh Thép không gỉ] Quy định nấu chảy và rót của EU sẽ định hình lại khả năng truy xuất nguồn gốc chuỗi cung ứng thép không gỉ
Đọc thêm
[SMM Tin nhanh Thép không gỉ] Quy định nấu chảy và rót của EU sẽ định hình lại khả năng truy xuất nguồn gốc chuỗi cung ứng thép không gỉ
[SMM Tin nhanh Thép không gỉ] Quy định nấu chảy và rót của EU sẽ định hình lại khả năng truy xuất nguồn gốc chuỗi cung ứng thép không gỉ
Từ ngày 1 tháng 10 năm 2026, các nhà nhập khẩu EU phải khai báo và chứng minh nơi thép nhập khẩu được nấu chảy và đúc ban đầu, thường thông qua chứng chỉ kiểm định nhà máy ghi rõ quốc gia nấu-đúc và số mẻ nấu. Các quy định không thay đổi hạn ngạch hiện có hay hạn chế tiếp cận thị trường từ các quốc gia cụ thể, và giai đoạn chuyển tiếp một năm cho phép sử dụng tài liệu thay thế khi không có chứng chỉ kiểm định. Tuy nhiên, từ tháng 10 năm 2027, Ủy ban sẽ đưa dữ liệu nấu-đúc thu thập được vào các quyết định phân bổ hạn ngạch theo quốc gia, với đánh giá tiếp theo vào tháng 6 năm 2028 về việc liệu quốc gia nấu-đúc có nên trở thành căn cứ để tiếp cận hạn ngạch hay không. Các quy định mang lại tác động đáng kể đối với chuỗi cung ứng thép không gỉ của châu Á, nơi hoạt động gia công xuyên biên giới diễn ra phổ biến. Indonesia đã xuất khẩu khoảng 330.000 tấn phôi thép không gỉ sang Ý trong năm 2025, với lượng hàng đến EU đã vượt 123.000 tấn trong năm nay; do phôi hiện nằm ngoài phạm vi các biện pháp thương mại, tuyến đường nhập khẩu phôi bán thành phẩm Indonesia để gia công tại chỗ có thể đối mặt với sự giám sát chặt chẽ hơn khi truy xuất nguồn gốc nấu-đúc ngày càng sâu rộng.
4 giờ trước
【SMM Tin nhanh Niken】Indonesia xác nhận chi tiết thực hiện nới lỏng DHE SDA
20 giờ trước
【SMM Tin nhanh Niken】Indonesia xác nhận chi tiết thực hiện nới lỏng DHE SDA
Đọc thêm
【SMM Tin nhanh Niken】Indonesia xác nhận chi tiết thực hiện nới lỏng DHE SDA
【SMM Tin nhanh Niken】Indonesia xác nhận chi tiết thực hiện nới lỏng DHE SDA
Indonesia đã xác nhận chi tiết triển khai Điều 18A của Quy định Chính phủ (PP) số 21/2026, có hiệu lực đối với tờ khai hải quan xuất khẩu (PPE) từ ngày 1 tháng 9 năm 2026. Chính phủ xác định 64 nhà xuất khẩu khai khoáng, tương đương khoảng 12% trong số 537 nhà xuất khẩu được rà soát, hiện đáp ứng tiêu chí đủ điều kiện. Nhà xuất khẩu đủ điều kiện phải là pháp nhân PT của Indonesia, hoạt động trong lĩnh vực khai khoáng và có ít nhất một cổ đông đến từ các quốc gia được chỉ định gồm Mỹ, Trung Quốc, Hồng Kông, Úc hoặc Canada, nắm giữ tối thiểu 10% cổ phần. Danh sách đủ điều kiện sẽ được rà soát hằng tháng. Chính phủ cũng chỉ định 15 ngân hàng ngoại hối để ký gửi DHE SDA theo Điều 18A, gồm 5 ngân hàng quốc doanh và 10 ngân hàng ngoài quốc doanh. Điều này cho phép các nhà xuất khẩu đủ điều kiện ký gửi DHE SDA bắt buộc tại các ngân hàng ngoài quốc doanh được chỉ định, mang lại sự linh hoạt cao hơn trong quản lý nguồn thu xuất khẩu.
20 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (ngày 03/09)
21 giờ trước
Dữ liệu: Diễn biến thị trường SHFE, DCE (ngày 03/09)
Đọc thêm
Dữ liệu: Diễn biến thị trường SHFE, DCE (ngày 03/09)
Dữ liệu: Diễn biến thị trường SHFE, DCE (ngày 03/09)
Bảng dưới đây cho thấy biến động giá kim loại đen và kim loại màu trên SHFE và DCE vào ngày 03/09/2026
21 giờ trước
Stainless steel output in January fell 4.05% month-on-month and is expected to decline by 7.22% month-on-month under the influence of the Spring Festival in February! - Shanghai Metals Market (SMM)