SMM Analysis: The Latest Aluminum Operation Status and Subsequent Forecast in Yunnan Province

Đã xuất bản: Nov 29, 2023 13:37
Nguồn: SMM
As Yunnan Province entered the dry season in early November, the power supply became tense, and local industrial electricity users reduced production to varying degrees, among which local aluminum smelters were subject to energy consumption management and production cuts during the dry season in the winter of 2023. As of now, four local aluminum smelters have basically completed the production reduction.

SHANGHAI, November 29 (SMM) –
As Yunnan Province entered the dry season in early November, the power supply became tense, and local industrial electricity users reduced production to varying degrees, among which local aluminum smelters were subject to energy consumption management and production cuts during the dry season in the winter of 2023. As of now, four local aluminum smelters have basically completed the production reduction.
A total production capacity of about 1.17 million mt has been cut, which is basically in line with the requirements at the beginning of the month, without major adjustments. The determination of aluminum production reduction in Yunnan Province this winter is slightly different from previous years. In the past, smelters were basically required to reduce the same amount of capacity. However, considering smelters’ aluminum alloying ratio, the local government and the power department tried to ensure the supply of aluminum liquid to downstream aluminium processing companies this winter. Hence, smelters with a higher proportion of ingots are subject to bigger production cuts, with reduction ranging from 10% to 40%. This new approach of production reduction will undoubtedly promote the extension of the local aluminum industry chain in Yunnan Province. According to SMM, in Yunnan Province, aluminum’s total operating capacity in October was about 5.65 million mt, and the aluminum-liquid alloying ratio was about 61%. After completing the production reduction, companies’ aluminum-liquid alloying ratio is expected to increase to about 77%, and the monthly aluminum ingot production affected is about 97,500 mt.
SMM brief review: In recent years, aluminum production reduction caused by tight power supply in Yunnan Province during the dry season have occurred repeatedly. Moreover, in the transition period from the dry season to the wet season in the past two years, aluminum companies experienced two rounds of production reduction. Given tight power supply, there are many rumors in the market that aluminum companies may once again face a second round of production cuts this winter. SMM surveyed many local aluminum smelters, who reported that they have not received notice on the second round of production reduction. In the short term, they may mainly maintain the current operation. Let’s make a bold prediction based on power supply and demand. Currently, Yunnan’s aluminum operating production capacity has dropped to around 4.48 million mt, an increase of about 11% YoY. In the winter of 2021-2022, electricity consumption by aluminium industry in Yunnan Province accounted for about 18% of the province's total power generation. According to the proportion above, during the transition period from the dry season to the sub-wet season (from December 2023 to May 2024), in order to maintain the current aluminum operating production capacity of 4.48 million mt in Yunnan Province, power generation needs to increase over 15% YoY. Whether such a high growth rate can be achieved is in great doubt. According to the latest data released by Yunnan Province, in October, Yunnan's industrial power generation above designated size was 40.191 billion kWh, an increase of 17.2%. However, no industrial power cuts occurred in Yunnan in October thanks to improved water supply. The current water level in Yunnan's mainstream water stations is slightly higher YoY. Hydropower generation may maintain YoY growth in the short term, while since the dry season spans a large period, and from January to February each year is the peak and valley time period of hydropower generation in Yunnan Province. The conditions above make power supply unpredictable in the future. However, wind, photovoltaic and thermal power generation in Yunnan Province significantly increased YoY in 2023. It is expected that the power supply may increase by over 10% during the transition period from dry to wet season this year and next, thereby easing expectation for local industrial power shortages. SMM will follow up on the power supply and demand in Yunnan.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
2 giờ trước
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
Đọc thêm
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
Thị trường phôi nhôm SMM: Trong tháng 7, tỷ lệ vận hành của phôi nhôm tăng 1,1 điểm phần trăm so với tháng trước lên 58,3%, tăng mạnh 5,2 điểm phần trăm so với cùng kỳ năm trước. Hưởng lợi từ diễn biến mạnh của phí gia công phôi nhôm trong quý II...
2 giờ trước
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
11 giờ trước
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
Đọc thêm
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
Phản hồi theo dõi SMM: Trận động đất mạnh 7,7 độ trên đảo Flores, Indonesia, có tác động tương đối nhỏ đến chuỗi ngành nhôm. Về phân bố công suất, bô-xít, alumin và phần lớn công suất nhôm tập trung ở miền tây Indonesia, nhìn chung cách tâm chấn hơn 1.400 km; ngay cả nhà máy luyện nhôm gần nhất—Sulawesi Morowali Huachin Aluminum—cũng cách khoảng 624 km, vẫn nằm ngoài bán kính thiệt hại 300 km. Cùng với chiều cao sóng thần dưới 0,4 m, cú sốc nguồn cung thực tế gần như bằng không. Về giá, tối đa chỉ có thể xuất hiện một nhịp tâm lý ngắn hạn 0–1%, dự kiến sẽ được triệt tiêu trong 1–3 ngày, không làm thay đổi xu hướng trung hạn
11 giờ trước
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
23 giờ trước
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
Đọc thêm
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
Theo truyền thông Philippines đưa tin ngày 12, Bộ Thương mại và Công nghiệp Philippines (DTI) đang lên kế hoạch thúc đẩy thiết lập chương trình chứng nhận bắt buộc đối với sản phẩm nhôm, theo đó yêu cầu các doanh nghiệp sản xuất trong nước và nước ngoài tại Philippines phải xin trước giấy phép chất lượng và an toàn chính thức của Philippines, đồng thời áp dụng phương thức chứng nhận “một nhà máy, một chứng nhận”.
23 giờ trước