Aluminium Price To Receives Strong Support From Domestic Real Estate And Other Macroeconomic Favorable Policies Along With Fundamentals Of Low Inventory

Đã xuất bản: Sep 13, 2023 21:45
Nguồn: SMM
SHANGHAI, Sep 13 (SMM) –Macroeconomics: Domestically, within the economic cycle, positive macroeconomic signals continue to bed released. People's Bank of China, China Banking and Insurance Regulatory Commission, and China Securities Regulatory Commission jointly held a meeting and proposed adjustments to optimize real estate credit policies.

SHANGHAI, Sep 13 (SMM) –Macroeconomics: Domestically, within the economic cycle, positive macroeconomic signals continue to bed released. People's Bank of China, China Banking and Insurance Regulatory Commission, and China Securities Regulatory Commission jointly held a meeting and proposed adjustments to optimize real estate credit policies. Subsequently, several provinces and cities explicitly announced the implementation of "mortgage rates for first-time home buyers regardless of past credit record", and many banks adjusted the interest rates for first-time home buyers' existing home loans. The People's Bank of China successively lowered the LPR and the reserve requirement ratio for foreign currency deposits. During this period, uncertainty increased in the overseas macro environment, with credit rating agencies such as Fitch downgrading the ratings of several U.S. banks. The Federal Reserve is likely to maintain interest rates unchanged in the short term, and the pace of interest rates increase may slow down.

Supply Side: In August, domestic supply growth slowed down, but as production has resumed and was released earlier in Yunnan, supply chain pressures in the Southwest and South China became more prominent. As of early September, domestic operating capacity was around 42.8 million mt, reaching a historical high, with a small room for further increase in September. Meanwhile, the import volume to China resumed since the end of August, with the restored import aluminium ingots profits, aluminium ingots imports increased. It is expected that net imports in August will increase slightly MoM and significantly YoY. As of July, net aluminium imports increased by approximately 716% YoY to around 520,000 mt. The total net imports for the entire year are expected to be around or exceed 900,000 mt. In the future, the growth in domestic supply will be accompanied by rising imports, and the subsequent supply chain pressures may become more prominent.

Demand Side: In August, most domestic downstream manufacturing sectors for aluminium, except for extrusion, showed a MoM improvement. During this month, domestic aluminium social inventories returned to a status of destocking, with aluminium ingots social inventories decreasing by around 48,000 mt. Going into September, downstream aluminium operation in China may maintain a slight growth trend MoM, with a small peak season in industrial extrusion and aluminium plate/sheet, strip, and foil sectors. However, considering the issues of domestic and overseas aluminium supply, it is expected that domestic aluminium ingots may face destocking challenges and accumulate inventories in September.

Summary: During September 12 - October 10, housing policies and the guideline on expanding domestic demand may continue to be implemented in China. However, it will take some time for these policies to be passed to actual downstream orders and demand. Overall, there is a positive outlook for China's macroeconomy. At the same time, high-frequency data from the United States indicates that the U.S. economy remains resilient. The Federal Reserve may continue to adopt a hawkish policy, providing support for the U.S. dollar index and putting pressure on commodities such as non-ferrous metals. As for the fundamentals, domestic aluminium operating capacity continues to reach new heights, but the growth rate of supply may be slowing. Overseas aluminium ingots supply may continue to grow, while consumption growth may be weak. There may still be some minor inventory growth pressure during this month. However, with low inventory, the near-term contracts are expected to remain well supported. In conclusion, according to SMM's forecast (September 12 - October 10), SHFE aluminium may maintain relatively strong, running at around 18,500-19,700 yuan/mt for the entire month. Attention should be given to inventory levels and downstream consumption during the National Day holiday.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Giá nhôm giảm nhẹ, xu hướng yếu không đổi [Đánh giá nhôm giao ngay Nam Trung Quốc hàng ngày của SMM]
50 phút trước
Giá nhôm giảm nhẹ, xu hướng yếu không đổi [Đánh giá nhôm giao ngay Nam Trung Quốc hàng ngày của SMM]
Đọc thêm
Giá nhôm giảm nhẹ, xu hướng yếu không đổi [Đánh giá nhôm giao ngay Nam Trung Quốc hàng ngày của SMM]
Giá nhôm giảm nhẹ, xu hướng yếu không đổi [Đánh giá nhôm giao ngay Nam Trung Quốc hàng ngày của SMM]
50 phút trước
Vạn Phong Auto báo cáo doanh thu và lợi nhuận nửa đầu năm 2026 giảm, tập trung vào hợp kim nhôm/magiê bền vững
1 giờ trước
Vạn Phong Auto báo cáo doanh thu và lợi nhuận nửa đầu năm 2026 giảm, tập trung vào hợp kim nhôm/magiê bền vững
Đọc thêm
Vạn Phong Auto báo cáo doanh thu và lợi nhuận nửa đầu năm 2026 giảm, tập trung vào hợp kim nhôm/magiê bền vững
Vạn Phong Auto báo cáo doanh thu và lợi nhuận nửa đầu năm 2026 giảm, tập trung vào hợp kim nhôm/magiê bền vững
Ngày 25/8, Wanfeng Auto Wheel công bố báo cáo bán niên 2026. Trong nửa đầu năm 2026, công ty đạt tổng doanh thu hoạt động 7,481 tỷ nhân dân tệ, giảm 0,18% so với cùng kỳ năm trước; lợi nhuận ròng thuộc về công ty mẹ là 418 triệu nhân dân tệ, giảm 16,46% so với cùng kỳ. Các sản phẩm linh kiện kim loại nhẹ của công ty tập trung vào hợp kim nhôm/magiê. Trong đó, công suất hàng năm của vành hợp kim nhôm nhẹ vượt 44 triệu bộ, cam kết nghiên cứu phát triển, sản xuất, kinh doanh và dịch vụ hậu mãi vành hợp kim nhôm cao cấp cho ô tô và xe máy, đạt vị trí dẫn đầu toàn cầu trong phân khúc. Trong kỳ báo cáo, công ty tiếp tục thúc đẩy sản xuất carbon thấp, thân thiện môi trường và ứng dụng toàn diện năng lượng xanh, đẩy mạnh thay thế nhôm nhiệt điện bằng nhôm thủy điện và sử dụng nhôm tái chế.
1 giờ trước
An Thuận phê duyệt báo cáo đánh giá tác động môi trường cho dự án sản xuất nhôm mới
1 giờ trước
An Thuận phê duyệt báo cáo đánh giá tác động môi trường cho dự án sản xuất nhôm mới
Đọc thêm
An Thuận phê duyệt báo cáo đánh giá tác động môi trường cho dự án sản xuất nhôm mới
An Thuận phê duyệt báo cáo đánh giá tác động môi trường cho dự án sản xuất nhôm mới
Mới đây, Cục Sinh thái và Môi trường thành phố An Thuận đã ban hành thông báo phê duyệt sau đối với báo cáo đánh giá tác động môi trường của dự án sản xuất 42.000 tấn nhôm thanh cuộn và 40.000 tấn nhôm dây quấn lại, tạo hạt và đúc khối nhôm mỗi năm. Theo các quy định liên quan về trình tự phê duyệt đánh giá tác động môi trường đối với dự án xây dựng, sau khi xem xét, Cục Sinh thái và Môi trường thành phố An Thuận đã ra quyết định phê duyệt đối với báo cáo đánh giá tác động môi trường của dự án sản xuất 42.000 tấn nhôm thanh cuộn và 40.000 tấn nhôm dây quấn lại, tạo hạt và đúc khối nhôm mỗi năm. Quyết định phê duyệt này được công bố công khai, thời gian công bố từ ngày 24 tháng 8 năm 2026 đến ngày 30 tháng 8 năm 2026 (7 ngày). Dự án tọa lạc tại Khu công nghiệp Tsingshan, thị trấn Caiguan, quận Xixiu, thành phố An Thuận, tỉnh Quý Châu. Đây là dự án xây dựng mới do Công ty TNHH Sản xuất Nhôm hợp kim Anshun Zhongtai Maolisen đầu tư xây dựng. Nội dung xây dựng chính của dự án như sau: dự án thuê nhà xưởng hiện có của Công ty TNHH Nhôm Zhongtai Xinbo, với diện tích sàn 5.560 m². Nội dung xây dựng chính bao gồm xây dựng một dây chuyền sản xuất 42.000 tấn nhôm thanh cuộn và 40.000 tấn nhôm dây quấn lại, tạo hạt và đúc khối nhôm, cùng với việc lắp đặt các thiết bị và cơ sở vật chất liên quan của dây chuyền sản xuất.
1 giờ trước
Aluminium Price To Receives Strong Support From Domestic Real Estate And Other Macroeconomic Favorable Policies Along With Fundamentals Of Low Inventory - Shanghai Metals Market (SMM)