China Weekly Inventory Summary and Data Wrap (May 12)

Đã xuất bản: May 12, 2023 18:30
Nguồn: SMM
This is a roundup of China's metals weekly inventory as of May 12.

SHANGHAI, May 12 (SMM) - This is a roundup of China's metals weekly inventory as of May 12.

Weekly Updates on China Aluminium Ingot and Billet Inventory as of May 11

Aluminium ingot: The aluminium ingot social inventories across China’s eight major markets stood at 787,000 mt as of May 11, down 48,000 mt from a week ago and 216,000 mt from the same period last year. The current inventory is the lowest level compared with the same period of the past five years, and the destocking speed is still relatively fast. Most regions experienced inventory reductions. Stocks in south China began to fall in the second half of the week as the impact of concentrated cargoes arrivals has faded and withdrawals from warehouses picked up after premiums fell back. Cargo arrivals in Wuxi have been relatively small, allowing local stocks to decline, and this situation is expected to last for the foreseeable future. Cargo arrivals in Gongyi were relatively stable, but downstream purchases were sluggish, thus local stocks fell only slightly.  Judging from the ingots in transit and smelters’ product portfolio, aluminium ingot inventory is expected to remain at a low level in the near future. That being said, aluminium ingot inventory will present less significance for reference as the proportion of non-ingot output at smelters is on the rise. 
Aluminium billet: The domestic aluminium billet social inventory stood at 168,600 mt as of May 11, up 10,900 mt from a week ago. Continuous cargo arrivals and poor downstream consumption contributed to inventory accumulation. An increasing share of molten aluminium has been made into billets and other intermediate products. Meanwhile, aluminium extrusion industry is gradually entering the off-season. Therefore, aluminium billet inventory will face great risks of building up. 

Pure Nickel Bonded Zone Inventory Stands Flat from May 5

As of May 12, bonded zone inventory of nickel stood flat WoW at 4,300 mt. The inventory of nickel briquettes was 1,370 mt, and that of nickel plates was 2,930 mt. The import window remained closed amid the decline in the SHFE/LME nickel price ratio, which cast no influence on imports of nickel plates under long-term contracts priced in RMB. And some spot pure nickel still flowed into the Chinese market.

Zinc Ingot Social Inventory Down 1,800 mt from this Monday

SMM data shows that social inventories of zinc ingots across seven major markets in China totalled 124,100 mt as of May 12, down 1,800 mt from May 8 and up 6,100 mt compared with the prior week. In Shanghai, the downstream buyers were cautious about purchasing against high zinc prices, when zinc ingots of some foreign brands arrived at the market. As a result, the inventory in Shanghai climbed further. In Guangdong, the market arrivals rose but the downstream purchases also improved approaching the weekend, allowing local inventory to dip slightly. In Tianjin, low market arrivals and growing transactions amid a decline in zinc prices together contributed to a drop in the inventory in Tianjin. Overall, the total inventory in Shanghai, Guangdong and Tianjin lost 1,800 mt, and that across seven major markets in China rose 6,100 mt.

Nickel Ore Inventories at Chinese Ports down 243,000 wmt WoW

As of May 12, the nickel ore inventories at Chinese ports dropped 243,000 wmt from a week earlier to 6.36 million wmt. The total Ni content stood at 50,000 mt. The port inventory of nickel ore across seven major Chinese ports stood at 3.18 million wmt, down 133,000 wmt WoW. Nickel ore prices rose slightly during the week. The buyers resumed their rigid-demand purchases this week, but the mines intended to quote higher. Mines in the Philippines will ship spot ore gradually in May despite the poor weather conditions in the country. Therefore, the port inventory may maintain an upward track in the near future.

Silicon metal social inventory increased as producers in Yunnan shipped cargoes to social warehouses in Kunming

 Social inventories of silicon metal in China’s three major regions totalled 160,000 mt as of May 12, up 3,000 mt from a week ago. During the week, silicon metal prices fell amid market panic. However, transactions were muted. Cargo inflows and outflows in warehouses at Tianjin Port and Huangpu Port were limited, leaving local stocks little changed. Stocks in Kunming rose mainly because silicon metal plants shipped cargoes to social warehouses in the region, with 421# silicon metal recording the biggest inventory growth. Total silicon metal social inventories remained high.

Copper inventories in the domestic bonded zones fell this week

As of Friday May 12, copper inventories in the domestic bonded zones decreased 9,300 mt from May 5 to 150,000 mt, according to the latest SMM survey.

Inventories in the Guangdong bonded zone added 1,000 mt to 17,000 mt, while inventories in the Shanghai bonded zone dropped 10,300 mt to 133,000 mt.

Recently, the import losses shrank and turned into profits, incentivising sellers to sell cargoes. Shipments under warrants thus increased. Arriving shipments under bill of lading grew this week but mostly went directly to downstream companies, limiting shipments arrivals in the bonded zones.

Next week, arriving shipments under bill of lading will fall. Bonded zone inventories are expected to drop further given narrower import losses.


Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
11 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
Đọc thêm
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG Metals công bố vào ngày 1 tháng 9 rằng mỏ Gediktepe tại Thổ Nhĩ Kỳ đã sản xuất lô tinh quặng đồng đầu tiên vào ngày 31 tháng 8, đánh dấu giai đoạn tăng tốc bắt đầu. Công ty sẽ tăng dần công suất xử lý và tối ưu hóa hiệu suất nhà máy, mục tiêu đạt sản lượng tối đa vào cuối năm 2026. Mục tiêu sản lượng hàng năm ổn định của Gediktepe là 20.000–25.000 tấn quy đổi đồng. Thông báo đầy đủ cũng xác nhận mỏ đã sản xuất lô tinh quặng kẽm đầu tiên vào tháng 8 năm 2026, mặc dù ngày cụ thể và khối lượng không được tiết lộ. SMM ước tính sản lượng kẽm trong tinh quặng của mỏ vào khoảng 10.000–15.000 tấn kẽm hàm lượng trong năm 2026.
11 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
11 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
Đọc thêm
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
11 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
13 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Đọc thêm
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Epiroc đã giành được đơn hàng trị giá khoảng 610 triệu SEK (64 triệu USD) từ MMG Limited và các nhà thầu khai thác mỏ của họ là China Huaye và 23MCC để cung cấp thiết bị khai thác hầm lò phục vụ việc mở rộng mỏ đồng Khoemacau tại Botswana. Đơn hàng bao gồm máy khoan gương, máy khoan sản xuất, máy khoan lắp neo cáp, máy xúc và xe tải khai thác hầm lò, cùng với hệ thống điều khiển từ xa, phụ tùng thay thế, đào tạo và hỗ trợ kỹ thuật tại hiện trường. Số thiết bị này sẽ hỗ trợ dự án mở rộng Khoemacau đang triển khai của MMG, nhằm nâng công suất sản xuất hàng năm từ khoảng 60.000 tấn lên 130.000 tấn đồng kim loại trong tinh quặng. Dự án bao gồm việc xây dựng một nhà máy chế biến mới công suất 4,5 triệu tấn/năm, nâng tổng công suất nghiền lên hơn 8 triệu tấn/năm, cùng với việc phát triển các khu vực Zone 5 North, Mango và Zeta North-East. Lô tinh quặng đồng đầu tiên từ dự án mở rộng dự kiến sẽ ra lò vào nửa đầu năm 2028. Epiroc cho biết việc bàn giao đội thiết bị hầm lò mới sẽ bắt đầu vào quý IV năm 2026 và dự kiến hoàn thành vào quý II năm 2028, về cơ bản phù hợp với tiến độ mở rộng. Đội thiết bị được đặt hàng bao gồm máy khoan gương Boomer, máy khoan sản xuất Simba, máy khoan lắp neo cáp Cabletec, máy xúc Scooptram và xe tải hầm lò Minetruck, trong đó một số thiết bị được trang bị cho vận hành tự động hóa và điều khiển từ xa. Đơn hàng thiết bị này đánh dấu một cột mốc triển khai nữa của dự án mở rộng Khoemacau đã được phê duyệt, chứ không phải là một mục tiêu sản xuất mới. Với hoạt động mua sắm đang tiến triển và việc bàn giao thiết bị được lên lịch đến quý II năm 2028, dự án tiếp tục tiến tới kế hoạch của MMG nhằm nâng công suất đồng trong tinh quặng lên 130.000 tấn mỗi năm. Đợt mở rộng này thể hiện mức tăng đáng kể theo kế hoạch về công suất sản xuất đồng của Khoemacau tại Vành đai đồng Kalahari của Botswana.
13 giờ trước