China Weekly Inventory Summary and Data Wrap (Mar 17)

Đã xuất bản: Mar 17, 2023 18:30
Nguồn: SMM
This is a roundup of China's metals weekly inventory as of March 17.

SHANGHAI, Mar 17 (SMM) - This is a roundup of China's metals weekly inventory as of March 17.

SMM Aluminium Ingot and Billet Social Inventory in China as of March 16

Aluminium ingot: The aluminium ingot social inventories across China’s eight major markets stood at 1.21 million mt as of March 16, down 56,000 mt from a week ago and 58,000 mt from early March. The social inventory, albeit up 121,000 mt YoY, has been falling for two consecutive weeks. The decline was led by Foshan, where improving consumption and falling aluminium prices fuelled downstream buying interest. Moreover, output cuts in Yunnan in late February also tightened supply in Foshan. Stocks in Wuxi and Gongyi began to fall, even though the decline was small. In particular, stocks in Gongyi remained high. Considering that the current transactions are mostly driven by rigid demand, it remains to be seen whether the destocking will sustain. 
Aluminium billet: The domestic aluminium billet social inventory stood at 169,400 mt as of March 16, up 6,000 mt from a week ago. Smooth arrivals and firm conversion margins suppressed buying interest. The conversion margins are at risk of falling amid the current market situation.

Bonded Zone Inventory of Nickel Falls 200 mt from March 10

Bonded zone inventory of nickel dropped 200 mt to 4,900 mt WoW as of March 17, with the inventory of nickel briquettes and nickel plates standing at 1,370 mt and 3,530 mt respectively, which was in line with market expectations. During the week, the nickel prices continued to decline due to the macro front, and downstream companies bought some nickel plates. In terms of nickel briquettes, although the spread between nickel briquettes and nickel sulphate shrank amid the decline in nickel prices, the production of nickel sulphate with nickel briquettes still cannot gain profits. Nickel briquette demand from the stainless steel sector was low, thus the bonded zone inventory of nickel briquettes fell only 100 mt this week.

Nickel Ore Inventories at Chinese Ports Dip 295,000 wmt WoW

As of March 17, the nickel ore inventories at Chinese ports dropped 295,000 wmt from a week earlier to 6.59 million wmt. The total Ni content stood at 52,000 mt. The port inventory across seven major Chinese ports stood at 3.22 million wmt, 295,000 wmt lower than last week. Nickel ore prices crashed this week. The NPI plants had to lower their quotes on the dropping NPI prices. The upstream and downstream companies still wrestled over the prices despite some mines’ price cut. NPI plants only purchased on rigid demand. The port inventory may maintain a downward track in the near future.

Social Inventory of Lead Ingots may Decline Futher Next Week

As of March 17, the social inventory of lead ingots across Shanghai, Guangdong, Zhejiang, Jiangsu and Tianjin was 55,500 mt, up 3,800 mt from March 10 and 5,800 mt from March 13.

According to research, due to the delivery of SHFE 2303 lead contract this week, the deliverable goods arrived at the warehouse, and thus the social inventory of lead ingots increased accordingly. In addition, due to the accumulation of inventory during the Chinese New Year holiday in February, smelters delivered actively. As such, the market supply tightened, and the delivery volume of lead ingots was much lower than that in February. In the current market, both primary lead and secondary lead smelters are undergoing maintenance, which weighed on the supply of lead ingots. Amid the acceptable downstream consumption, it is expected that the social inventory of lead ingots will turn into a downward trend again next week.

Social Inventory of Silicon Metal Remains Flat amid Sluggish Market Sentiment

According to SMM statistics, the social inventory of silicon metal in the three places totaled 125,000 mt on March 17, which was basically the same as last week. The arrivals at Tianjin Port increased during the week while the shipments were basically the same as last week, hence the inventory increased slightly. There was no significant increase in shipments at Huangpu Port this week, hence the total inventory decreased due to the lack of arrivals. Inventory in Kunming has increased slightly, and the tight transportation capacity in Yunnan Province drove up the freight. It is understood that the freight from Yingjiang, Dehong Prefecture, to Kunming was around 250 yuan/mt, which was about 70 yuan/mt higher than the conventional freight.

Zinc Ingot Social Inventory Down 9,200 mt from Monday

SMM data shows that social inventories of zinc ingots across seven major markets in China totalled 169,400 mt as of today March 17, down 13,300 mt from a week earlier and 9,200 mt lower than this Monday. In Shanghai, the market arrivals were moderate, and the transactions were brisk amid falling zinc prices. The growing outflows caused the inventory in Shanghai to shrink. In Tianjin, the inventory changed little with ample arrivals and strong purchasing demand of downstream enterprises. In Guangdong, the slump in zinc prices encouraged downstream buyers to pick up cargoes passionately. The small inflows into the warehouse, coupled with stable outflows, brought about a sharp decline in the inventory in Guangdong. Overall, the total inventory in Shanghai, Guangdong and Tianjin fell 7,900 mt, and that across seven major markets in China was down 9,200 mt.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
10 giờ trước
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
Đọc thêm
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG mở rộng mỏ sulphide Gediktepe sản xuất tinh quặng đồng và kẽm đầu tiên; mục tiêu sản xuất toàn phần vào cuối năm 2026
ACG Metals công bố vào ngày 1 tháng 9 rằng mỏ Gediktepe tại Thổ Nhĩ Kỳ đã sản xuất lô tinh quặng đồng đầu tiên vào ngày 31 tháng 8, đánh dấu giai đoạn tăng tốc bắt đầu. Công ty sẽ tăng dần công suất xử lý và tối ưu hóa hiệu suất nhà máy, mục tiêu đạt sản lượng tối đa vào cuối năm 2026. Mục tiêu sản lượng hàng năm ổn định của Gediktepe là 20.000–25.000 tấn quy đổi đồng. Thông báo đầy đủ cũng xác nhận mỏ đã sản xuất lô tinh quặng kẽm đầu tiên vào tháng 8 năm 2026, mặc dù ngày cụ thể và khối lượng không được tiết lộ. SMM ước tính sản lượng kẽm trong tinh quặng của mỏ vào khoảng 10.000–15.000 tấn kẽm hàm lượng trong năm 2026.
10 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
10 giờ trước
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
Đọc thêm
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
[ Phân tích SMM ] Hướng dẫn trực quan về Báo cáo bán niên 2026 của 19 nhà luyện đồng
10 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
12 giờ trước
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Đọc thêm
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
MMG đặt hàng thiết bị trị giá 64 triệu USD để hỗ trợ mở rộng Khoemacau tại Botswana
Epiroc đã giành được đơn hàng trị giá khoảng 610 triệu SEK (64 triệu USD) từ MMG Limited và các nhà thầu khai thác mỏ của họ là China Huaye và 23MCC để cung cấp thiết bị khai thác hầm lò phục vụ việc mở rộng mỏ đồng Khoemacau tại Botswana. Đơn hàng bao gồm máy khoan gương, máy khoan sản xuất, máy khoan lắp neo cáp, máy xúc và xe tải khai thác hầm lò, cùng với hệ thống điều khiển từ xa, phụ tùng thay thế, đào tạo và hỗ trợ kỹ thuật tại hiện trường. Số thiết bị này sẽ hỗ trợ dự án mở rộng Khoemacau đang triển khai của MMG, nhằm nâng công suất sản xuất hàng năm từ khoảng 60.000 tấn lên 130.000 tấn đồng kim loại trong tinh quặng. Dự án bao gồm việc xây dựng một nhà máy chế biến mới công suất 4,5 triệu tấn/năm, nâng tổng công suất nghiền lên hơn 8 triệu tấn/năm, cùng với việc phát triển các khu vực Zone 5 North, Mango và Zeta North-East. Lô tinh quặng đồng đầu tiên từ dự án mở rộng dự kiến sẽ ra lò vào nửa đầu năm 2028. Epiroc cho biết việc bàn giao đội thiết bị hầm lò mới sẽ bắt đầu vào quý IV năm 2026 và dự kiến hoàn thành vào quý II năm 2028, về cơ bản phù hợp với tiến độ mở rộng. Đội thiết bị được đặt hàng bao gồm máy khoan gương Boomer, máy khoan sản xuất Simba, máy khoan lắp neo cáp Cabletec, máy xúc Scooptram và xe tải hầm lò Minetruck, trong đó một số thiết bị được trang bị cho vận hành tự động hóa và điều khiển từ xa. Đơn hàng thiết bị này đánh dấu một cột mốc triển khai nữa của dự án mở rộng Khoemacau đã được phê duyệt, chứ không phải là một mục tiêu sản xuất mới. Với hoạt động mua sắm đang tiến triển và việc bàn giao thiết bị được lên lịch đến quý II năm 2028, dự án tiếp tục tiến tới kế hoạch của MMG nhằm nâng công suất đồng trong tinh quặng lên 130.000 tấn mỗi năm. Đợt mở rộng này thể hiện mức tăng đáng kể theo kế hoạch về công suất sản xuất đồng của Khoemacau tại Vành đai đồng Kalahari của Botswana.
12 giờ trước