SMM Analysis of Recent Lepidolite Market and Relating Environmental Protection Investigation in Jiangxi

Đã xuất bản: Dec 9, 2022 11:06
For the smelting of lepidolite, due to the large amount of slag produced in the smelting process, the environmental protection pressure brought about by the reuse and proper treatment of smelting tailings should not be underestimated.

SHANGHAI, Dec 9 (SMM) - 

Q: Will it put extra pressure on environmental protection when producing lithium carbonate with lepidolite or extracting lithium from lithium slag with transformed production lines of ceramic manufacturers?

A: For the smelting of lepidolite, due to the large amount of slag produced in the smelting process, the environmental protection pressure brought about by the reuse and proper treatment of smelting tailings should not be underestimated. At the same time, for enterprises that extract lithium from lithium slag, the pressure of environmental protection will be even greater. The industrial waste gas such as sulphide and fluoride produced when extracting lithium from lithium slag will put pressure on environmental protection, and the feasibility of comprehensive reuse of lithium slag produced after secondary roasting will be significantly reduced at present.

Q: How many ceramic manufacturers in Yichun city, Jiangxi province are switching to extracting lithium from lithium slag? What is the push behind this trend?

A: At present, there are about 40-50 production lines switching to lithium extraction in Yichun. The demand brought about by the sluggish real estate market continued to weaken, and most of the ceramic manufacturers performed poorly in terms of revenue. Meanwhile, the ceramic production is very similar to the early process of lepidolite smelting, and it is also easy to convert and transform the existing ceramic production lines. Driven by the demand for new energy, the prices of lithium salt have been skyrocketing, attracting some ceramic manufacturers to transform their production lines for higher revenue. 

Q: It was mentioned earlier that the environmental protection inspection may have reduced the production by 3,000-4,000 mt of lithium carbonate equivalent (LCE). To what extent does the figure account for domestic total supply? SMM previously predicted that the shortage in the lithium market may be reversed next year. Will you adjust your forecast if you take into account the supply constraints in Yichun city?

A: The production loss accounts for about 10-15% of the domestic monthly production of lithium carbonate. On the one hand, the situation of resumption of production in Yichun is still unclear, and the problem of heavy metals in the sewage is serious, and many large lithium salt producers have been affected. If the environmental protection problem is not properly addressed, it is expected that the scope and duration of the impact will continue expand. On the other hand, the environmental protection issues caused by lepidolite smelting are far-reaching, which may bring more uncertainties to the future lithium production based on lepidolite. SMM will adjust the market supply forecast according to our constant observations. 

Q: Have there been any changes in the production suspensions of lithium enterprises in Yichun city? Will you maintain the previous forecast of "3,000-4,000 mt LCE” of production loss?

A: There has been no change for now. At present, the key investigation area is still the Jinjiang River Basin, and other areas have not been involved. However, if the pollution problem continues, it may affect Jinjiang tributaries or other river basins. Yesterday, Tiancheng Lithium Industry and Xiecheng Lithium Industry under Kanglongda have resumed the production, and some enterprises are also actively preparing for the resumption of production. However, there have been enterprises ordered to be closed temporarily from time to time during this environmental protection investigation. On the whole, SMM still maintains the previous forecast of 3,000-4,000 mt LCE of production loss. SMM will keep our clients updated if there is any progress.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
[SMM News] Lithium Africa phát hiện mẫu quặng chứa 1,98% oxit lithium tại khu vực Kanien Trend thuộc Agboville
20 giờ trước
[SMM News] Lithium Africa phát hiện mẫu quặng chứa 1,98% oxit lithium tại khu vực Kanien Trend thuộc Agboville
Đọc thêm
[SMM News] Lithium Africa phát hiện mẫu quặng chứa 1,98% oxit lithium tại khu vực Kanien Trend thuộc Agboville
[SMM News] Lithium Africa phát hiện mẫu quặng chứa 1,98% oxit lithium tại khu vực Kanien Trend thuộc Agboville
Ngày 15 tháng 9, Lithium Africa đã xác định được xu hướng spodumene thứ hai tại Dự án Agboville ở Côte d'Ivoire, với các mẫu đá cho hàm lượng lên tới 1,98% oxit lithium (Li2O). Công ty báo cáo 19 mẫu pegmatit chứa spodumene từ xu hướng Kanien, trong đó 14 mẫu có hàm lượng trên 1% Li2O, kéo dài 2,8 km dọc theo một khối granit muscovit bị cắt xén trong phạm vi giấy phép. Kanien là xu hướng spodumene nguyên sinh thứ hai của khu vực, cùng với xu hướng Saby, nơi đào rãnh thu được 8 m với hàm lượng 1,1% Li2O. Giám đốc điều hành Thomas Benson cho biết các kết quả này cho thấy một khu vực lithium mới nổi chứ không phải các điểm quặng riêng lẻ. Kanien nằm dọc theo phương kéo dài của các mẫu spodumene có hàm lượng lên tới 1,36% Li2O trên một giấy phép liền kề, cùng nhau xác định một hành lang pegmatit spodumene dài khoảng 7 km xuyên qua ranh giới giấy phép. Công ty nắm giữ khoảng 485 km² giấy phép đã được cấp thông qua liên doanh 50/50 và đã nộp đơn xin giấy phép Sikensi liền kề rộng 368 km². Chương trình khoan RC dài 2.000 m tại Saby đã tạm dừng vì mùa mưa sau khi hoàn thành 1.137 m, với kết quả dự kiến vào quý 4 năm 2026. Giấy phép Agboville có diện tích 399,27 km², cách Abidjan khoảng 85 km về phía bắc, bổ sung một mục tiêu thăm dò Tây Phi mới vào chuỗi cung ứng spodumene toàn cầu.
20 giờ trước
[SMM Tin tức] Liên doanh Surge Evolution Nevada North sản xuất lithium carbonate cấp pin
20 giờ trước
[SMM Tin tức] Liên doanh Surge Evolution Nevada North sản xuất lithium carbonate cấp pin
Đọc thêm
[SMM Tin tức] Liên doanh Surge Evolution Nevada North sản xuất lithium carbonate cấp pin
[SMM Tin tức] Liên doanh Surge Evolution Nevada North sản xuất lithium carbonate cấp pin
Liên doanh lithium Nevada North giữa Surge Battery Metals và Evolution Mining đã sản xuất lithium carbonate cấp pin (Li2CO3) độ tinh khiết 99,95% từ quặng dự án tại Mỹ, hỗ trợ cho Nghiên cứu tiền khả thi của dự án. Kemetco Research đã sản xuất Li2CO3 thô có hàm lượng 99% từ mẫu tổng hợp chính Nevada North thông qua tuyển khoáng, ngâm chiết axit sulfuric, tinh chế dung dịch và kết tủa carbonate. Một phần được tinh chế thành sản phẩm cấp pin 99,95%. Quá trình ngâm chiết đạt hiệu suất thu hồi lithium trên 93% ở mức 475 kg axit/tấn nguyên liệu, tăng lên khoảng 98% khi bổ sung thêm axit, hoàn thành trong vòng một giờ ở 90°C. Quá trình mài mòn và sàng lọc thu hồi 98,9% lithium vào phần hạt mịn trong khi loại bỏ khoảng 75% carbonate tiêu thụ axit. CEO Greg Reimer cho biết công trình này chứng minh toàn bộ chuỗi từ đất sét trầm tích đến sản phẩm cấp pin tinh chế. Trọng tâm hiện chuyển sang thử nghiệm quy mô pilot về hiệu suất thu hồi, tính nhất quán, mức tiêu thụ thuốc thử và hiệu suất năng lượng. Surge cũng nắm giữ Dự án lithium San Emidio ở Nevada, bổ sung nguồn cung lithium từ đất sét của Mỹ vào chuỗi thị trường.
20 giờ trước
[SMM News] American Lithium đạt tỷ lệ thu hồi cao hơn dự kiến tại nhà máy thí điểm Falchani ở Peru
20 giờ trước
[SMM News] American Lithium đạt tỷ lệ thu hồi cao hơn dự kiến tại nhà máy thí điểm Falchani ở Peru
Đọc thêm
[SMM News] American Lithium đạt tỷ lệ thu hồi cao hơn dự kiến tại nhà máy thí điểm Falchani ở Peru
[SMM News] American Lithium đạt tỷ lệ thu hồi cao hơn dự kiến tại nhà máy thí điểm Falchani ở Peru
Lithium Corporation đã vận hành toàn bộ và bắt đầu hoạt động nhà máy thí điểm lithium Falchani tại Peru, với các hệ thống vận hành đạt hiệu suất như kỳ vọng. Nhà máy do công ty tư vấn TECMMINE tại Lima triển khai, đạt tỷ lệ thu hồi lithium trung bình 88,7%, cao hơn mức thu hồi 80% dự kiến trong đánh giá kinh tế sơ bộ năm 2024. Với toàn bộ thiết bị theo sơ đồ công nghệ đã được lắp đặt và thử nghiệm, American Lithium đang tiến tới xác nhận toàn bộ quy trình từ đầu đến cuối ở quy mô lớn theo chế độ liên tục, nhằm xác nhận kết quả ở quy mô phòng thí nghiệm. Nhà máy thí điểm dự kiến sẽ chạy liên tục ở công suất mục tiêu trong ba tháng, xử lý từ sáu đến mười tấn quặng từ Falchani. Kết quả sẽ được đưa vào các nghiên cứu khả thi trong tương lai. Khoáng hóa lithium trong đá núi lửa tại Falchani có hàm lượng tạp chất tự nhiên thấp, hỗ trợ quy trình công nghệ đơn giản có khả năng sản xuất lithium carbonate cấp pin với độ tinh khiết vượt 99,5%, bổ sung một nguồn cung lithium tiềm năng mới từ Nam Mỹ cho thị trường.
20 giờ trước
SMM Analysis of Recent Lepidolite Market and Relating Environmental Protection Investigation in Jiangxi - Shanghai Metals Market (SMM)