Galvanised Sheet Exports in the First Three Quarters were Sluggish, and What is the Forecast for the Fourth Quarter?

Đã xuất bản: Nov 1, 2022 10:07
Nguồn: SMM
SMM believes that the exports of galvanised sheet will continue to be weak in the remaining months of 2022.

SHANGHAI, Nov 1 (SMM) - According to the latest customs data, the cumulative export volume of galvanised sheet in the first three quarters of 2022 totalled 6.77 million mt, down 16.96% from the 8.15 million mt in the comparable quarters of 2021. As far as the third quarter is concerned, the export volume of galvanized sheet was 2.22 million mt, a year-on-year decrease of 17.92% from the 2.71 million mt. As for September, China exported 580,000 mt of galvanised sheet, down 33.61% year-on-year and 23.65% month-on-month. SMM believes the total exports of galvanised sheet in 2022 will be lower compared with previous year, and the main reason is attributed to the reduced exports in September.

Judging from the monthly export volume of galvanised sheet in 2022, the export volume in September stood at 580,000 mt, which was only higher than that in February. It is known that in February the operating rates of galvanising companies were rather low during the Spring Festival holiday and the Winter Olympics. At the same time, the export tax rebates were cancelled, which also weighed on the export volume. Normally, the export volume in September shall be ample as the operating rates and raw material supply were under no restriction. However, the fact was that the export volume in September was merely a little higher than the lowest point of the year. It could be observed in the data that the export volume in the third quarter of 2022 was down 17.92% year-on-year, and that in September alone dropped 33.61% year-on-year.

Galvanised sheet sector is one of the major downstream sectors in terms of zinc consumption. Its future exports is of great concern.

Considering the changes in energy prices in the coming heating season, the natural gas costs in galvanised sheet production may increase by 10-18 yuan/mt, and the power costs may increase by 30-50 yuan/mt. As such, the galvanised sheet will become less attractive due its high costs. In terms of exporting destinations, the galvanised sheet with low zinc content mainly flows to South-east Asia, while the galvanised sheet with high zinc content is mainly exported to Europe, America, central Asia and other regions. Countries in South-east Asia usually pay more attention to the prices of galvanised sheet and compare the quality of different products under the same price. The three major importers of Chinese galvanised sheet in South-east Asia are Thailand, the Philippines and South Korea. In other words, if the price competitiveness of domestic galvanised sheet dropped in the future, it will exert a huge pressure on its exports.

The previous data shows that the export volume of galvanised sheet in the fourth quarter usually stands at the yearly low. As such, SMM believes that the exports of galvanised sheet will continue to be weak in the remaining months of 2022. It is expected that in the fourth quarter, galvanised sheet manufacturers will not plan to increase output on account of poor export orders. With the off-season underway, SMM is not optimistic about the growth in refined zinc consumption of galvanized sheet sector.


Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Úc Rà soát Thuế chống bán phá giá đối với Thép mạ kẽm từ Ấn Độ, Malaysia, Việt Nam trong bối cảnh lo ngại về kẽm
9 giờ trước
Úc Rà soát Thuế chống bán phá giá đối với Thép mạ kẽm từ Ấn Độ, Malaysia, Việt Nam trong bối cảnh lo ngại về kẽm
Đọc thêm
Úc Rà soát Thuế chống bán phá giá đối với Thép mạ kẽm từ Ấn Độ, Malaysia, Việt Nam trong bối cảnh lo ngại về kẽm
Úc Rà soát Thuế chống bán phá giá đối với Thép mạ kẽm từ Ấn Độ, Malaysia, Việt Nam trong bối cảnh lo ngại về kẽm
Ngày 9 tháng 9 năm 2026, Australia khởi xướng rà soát cuối kỳ lần thứ hai đối với biện pháp chống bán phá giá thép mạ kẽm từ Ấn Độ, Malaysia và Việt Nam, đồng thời tiến hành rà soát cuối kỳ riêng đối với biện pháp chống trợ cấp áp dụng cho hàng nhập khẩu từ Ấn Độ. Kỳ rà soát từ tháng 7/2025 đến tháng 6/2026, với báo cáo cuối cùng dự kiến công bố trước ngày 11 tháng 2 năm 2027. Do thép mạ kẽm là lĩnh vực tiêu thụ kẽm lớn nhất, các biện pháp này ảnh hưởng trực tiếp đến chi phí xuất khẩu và năng lực cạnh tranh, có khả năng tác động đến nhu cầu kẽm nội địa và chuỗi cung ứng của Australia. Việc duy trì thuế sẽ mang lại sự bảo hộ nhất định cho năng lực sản xuất thép và mạ trong nước, trong khi chấm dứt thuế có thể làm gia tăng hàng nhập khẩu giá rẻ và ảnh hưởng đến tiêu thụ kẽm trong khu vực. Kết quả cuối cùng vẫn phụ thuộc vào quyết định của cơ quan chức năng.
9 giờ trước
Nguồn cung quặng hạn chế kéo dài khi nhu cầu mùa đông tiếp diễn, các nhà luyện kim Trung Quốc tăng mua quặng nhập khẩu trong bối cảnh phí xử lý thấp
9 giờ trước
Nguồn cung quặng hạn chế kéo dài khi nhu cầu mùa đông tiếp diễn, các nhà luyện kim Trung Quốc tăng mua quặng nhập khẩu trong bối cảnh phí xử lý thấp
Đọc thêm
Nguồn cung quặng hạn chế kéo dài khi nhu cầu mùa đông tiếp diễn, các nhà luyện kim Trung Quốc tăng mua quặng nhập khẩu trong bối cảnh phí xử lý thấp
Nguồn cung quặng hạn chế kéo dài khi nhu cầu mùa đông tiếp diễn, các nhà luyện kim Trung Quốc tăng mua quặng nhập khẩu trong bối cảnh phí xử lý thấp
Các chào hàng từ thương nhân quặng trên thị trường tuần này vẫn hạn chế, trong khi nhu cầu dự trữ mùa đông vẫn tiếp diễn. Một số nhà luyện kim Trung Quốc tiếp tục hỏi mua và thu mua tinh quặng nhập khẩu cho quý 4, với phí gia công trên thị trường duy trì ở mức thấp.
9 giờ trước
Mỏ kẽm Tây Bắc Trung Quốc chào thầu tháng 9 ở mức -2.800 NDT/tấn; SMM sẽ theo dõi phí gia công
9 giờ trước
Mỏ kẽm Tây Bắc Trung Quốc chào thầu tháng 9 ở mức -2.800 NDT/tấn; SMM sẽ theo dõi phí gia công
Đọc thêm
Mỏ kẽm Tây Bắc Trung Quốc chào thầu tháng 9 ở mức -2.800 NDT/tấn; SMM sẽ theo dõi phí gia công
Mỏ kẽm Tây Bắc Trung Quốc chào thầu tháng 9 ở mức -2.800 NDT/tấn; SMM sẽ theo dõi phí gia công
Theo SMM, một mỏ kẽm ở Tây Bắc Trung Quốc đã đưa ra giá đấu thầu tự nhận hàng tháng 9 khoảng -2.800 NDT/tấn kim loại trong tuần này. SMM sẽ tiếp tục theo dõi biến động phí gia công.
9 giờ trước
Galvanised Sheet Exports in the First Three Quarters were Sluggish, and What is the Forecast for the Fourth Quarter? - Shanghai Metals Market (SMM)