How Is Aluminium Market amid Disturbances in China and Abroad and Improving Consumption?

Đã xuất bản: Oct 11, 2022 11:08
At the same time, domestic production is also reduced constantly. Following the large-scale production reduction of aluminium smelters in Sichuan Province in August, those in Yunnan also experienced extensive production reductions in September.

SHANGHAI, Oct 11 (SMM) - Recently, the domestic and overseas aluminium market saw again disturbances!

On September 27, Hydro Aluminium, Europe's largest producer of primary aluminium, said it would partially cut primary aluminium production of Hydro Karmoy and Hydro Husnes aluminium smelters in Norway in response to the reduced demand for aluminium extrusion round ingots in the European market. The decision equals to reducing primary aluminium production by 110,000-130,000 mt/year.

Since the second half of the year, aluminium smelters in Europe are still constrained by factors such as high energy prices and weak demand. There are frequent news of production reductions by smelters in the region, and subsequent production reductions may continue. According to SMM statistics, considering the production reduction plan of Hydro's plants in Norway in the later stage, the reduction in overseas production will expand from 1.53 million mt to around 1.82 million mt in the future.

At the same time, it is reported on September 30 that LME was discussing whether and under what circumstances to ban new supplies of Russian metals such as aluminium, nickel and copper, which led to a surge in LME aluminium. On October 7, the LME officially launched a market discussion paper on whether to impose sanctions on Russian metals in 2023, barring its new supply from entering the market.

It is understood that Russia is rich in mineral resources, and its metal production accounts for a relatively high proportion of global supply. It is the main producer of copper, aluminium and nickel. The annual production capacity of Rusal United Company is about 4.5 million mt, accounting for 6% of the total global aluminium capacity, and 13% when excluding China. Rusal produced 3.6 million mt of aluminium 2021. In addition, Rusal is the largest supplier of aluminium in Europe, with 40% of its production supplied to Europe.

Some analysts believe that the sanctions may change the global aluminium supply and demand pattern.

SMM believes that if the LME ban on Russian aluminium is approved, it will inevitably affect the market circulation and trading of Russian metals overseas. If Russian aluminium companies are unable to ship normally because of this ban, they will have to find other markets and trading methods, including the possibility of accepting lower prices or reducing the production.

At the same time, domestic production is also reduced constantly. Following the large-scale production reduction of aluminium smelters in Sichuan Province in August, those in Yunnan also experienced extensive production reductions in September. At present, aluminium smelters in Yunnan generally reduce the production by 20%. Although the smelters in Sichuan are resuming the production, the release of capacity is slow.

According to SMM statistics, up to now, the operating domestic aluminium capacity has dropped rapidly to below 40.3 million mt. It is expected that the domestic aluminium production will drop to around 3.33 million mt in September. The production is likely to rebound slighlty to 3.43 million mt in October with increases only possible in Sichuan and Inner Mongolia.

Under the influence from both supply and demand sides, the aluminium prices in China and abroad march toward different directions. The market generally believes that the aluminium prices may meet the pivot under the production reductions in China and abroad.

While the domestic production reduction is advancing, the market demand is showing marginal improvement. Therefore, on the first trading day after the National Day holiday, SHFE aluminium rose after opening, and then stabilised before closing the day with a gain of 1.56% at 18,565 yuan/mt.

In the overseas market, the reduction in the production of aluminium smelters brought about by high energy prices has reduced the market supply, while the demand has also continued to weaken. Under the pressure of weak supply and demand, LME aluminium returned to the downward trend after three consecutive rises during the holiday. As of 15:50, LME aluminium fell 0.22% to $2,294/mt.

SMM believes that as aluminium production continues in China and abroad, the supply is tightening as a whole. However, the domestic demand side has gradually improved. According to SMM survey, the new orders in the domestic aluminium downstream processing industry improved in September. The composite PMI of downstream industries rebounded 12.4 points to 57.9, back to the expansion zone. And in terms of the current orders and production scheduling of enterprises, the downstream consumption of aluminium in October is still in marginal improvement.

However, it should be noted that as of October 10, the domestic social inventory of aluminium calculated by SMM was 672,000 mt, an increase of 53,000 mt compared with the inventory on September 29. It is necessary to pay attention to whether downstream consumption can improve so prevent the social inventory from accumulating continuously.

At the same time, the domestic aluminium cost is still rising. The weighted full average cost of domestic aluminium industry was about 17,576 yuan/mt, an increase of 228 yuan/mt from the previous month. About 24% of the domestic operating aluminium capacity carries a full cost of more than 18,000 yuan/mt. With the high-priced coal supply of power plants, the electricity prices are likely to usher in constant increases. In addition, the prices of auxiliary materials such as prebaked anodes have risen again in October. Although the prices of alumina are still on the downward trend, it is difficult to reverse the upward trend in the cost of aluminium. And the total cost of aluminium smelters has remained high.

Therefore, in general, SMM believes that the fundamentals of domestic aluminium market could offer some support in the short term, but there are many uncertainties on overseas macro front. As such, aluminium prices are likely to move in a wide range. Follow-up attention will be paid to the final implementation of the LME discussion document on whether to ban Russian metals and the domestic downstream consumption after the National Day holiday.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
2 giờ trước
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
Đọc thêm
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
Nguồn cung phôi nhôm Trung Quốc: Tháng 7 kéo dài xu hướng tăng do quán tính; kỳ vọng giảm từ mức cao trong tháng 8
Thị trường phôi nhôm SMM: Trong tháng 7, tỷ lệ vận hành của phôi nhôm tăng 1,1 điểm phần trăm so với tháng trước lên 58,3%, tăng mạnh 5,2 điểm phần trăm so với cùng kỳ năm trước. Hưởng lợi từ diễn biến mạnh của phí gia công phôi nhôm trong quý II...
2 giờ trước
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
11 giờ trước
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
Đọc thêm
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
Động đất 7,7 độ ở Indonesia tác động tương đối nhỏ đến chuỗi ngành nhôm, mức ảnh hưởng gần như bằng 0
Phản hồi theo dõi SMM: Trận động đất mạnh 7,7 độ trên đảo Flores, Indonesia, có tác động tương đối nhỏ đến chuỗi ngành nhôm. Về phân bố công suất, bô-xít, alumin và phần lớn công suất nhôm tập trung ở miền tây Indonesia, nhìn chung cách tâm chấn hơn 1.400 km; ngay cả nhà máy luyện nhôm gần nhất—Sulawesi Morowali Huachin Aluminum—cũng cách khoảng 624 km, vẫn nằm ngoài bán kính thiệt hại 300 km. Cùng với chiều cao sóng thần dưới 0,4 m, cú sốc nguồn cung thực tế gần như bằng không. Về giá, tối đa chỉ có thể xuất hiện một nhịp tâm lý ngắn hạn 0–1%, dự kiến sẽ được triệt tiêu trong 1–3 ngày, không làm thay đổi xu hướng trung hạn
11 giờ trước
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
23 giờ trước
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
Đọc thêm
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
DTI Philippines Lên Kế Hoạch Chứng Nhận Bắt Buộc Đối Với Sản Phẩm Nhôm Nhằm Đảm Bảo Tiêu Chuẩn Chất Lượng và An Toàn
Theo truyền thông Philippines đưa tin ngày 12, Bộ Thương mại và Công nghiệp Philippines (DTI) đang lên kế hoạch thúc đẩy thiết lập chương trình chứng nhận bắt buộc đối với sản phẩm nhôm, theo đó yêu cầu các doanh nghiệp sản xuất trong nước và nước ngoài tại Philippines phải xin trước giấy phép chất lượng và an toàn chính thức của Philippines, đồng thời áp dụng phương thức chứng nhận “một nhà máy, một chứng nhận”.
23 giờ trước