Omicron sweeps the Japanese auto industry and car companies cut production one after another.

Đã xuất bản: Jan 21, 2022 13:49 (GMT+8)
[Omicron sweeps Japanese auto companies to cut production] according to foreign media reports, the latest wave of novel coronavirus epidemic in Japan has further disrupted the production plans of Toyota and other Japanese automakers. On Jan. 20, Toyota said it would suspend production at 21 production lines at its 11 Japanese plants for four days, starting on Jan. 17. Toyota was forced to temporarily close its Japanese plant because more and more workers at Toyota's Japanese plant and its suppliers were infected with novel coronavirus.

The latest novel coronavirus epidemic in Japan has further disrupted the production plans of Toyota and other Japanese automakers, according to foreign media reports.

On Jan. 20, Toyota said it would suspend production at 21 production lines at its 11 Japanese plants for four days, starting on Jan. 17. Toyota was forced to temporarily close its Japanese plant because more and more workers at Toyota's Japanese plant and its suppliers were infected with novel coronavirus.

Toyota has 14 factories in Japan. In January, Toyota's production loss in Japan will expand to 47000 vehicles, more than double the 20, 000 previously announced production cuts due to lack of cores. The shutdown is expected to affect production of Toyota's Crown sedan and Land Cruiser SUV.

Toyota Aichi Prefecture (Aichi) Tsutsumi plant has been a series of novel coronavirus infection cases. Toyota reported four new cases of novel coronavirus infection at the plant on Jan. 20, bringing the total to 18. The infection caused the factory to cancel day shift production on January 19 and night production on January 20. Toyota did not elaborate on the novel coronavirus infection of its suppliers.

Toyota had predicted that its global production target of 9 million vehicles would not be met this fiscal year (2021.4.1-2022.3.31) due to tight supply of chips. Toyota's production fell to 700000 vehicles in February, down from the 900000 it told suppliers at the end of December.

The wave of Omicron infection sweeping Japan has hindered the production of the Japanese automobile industry. Toyota subsidiary Dafa Motor (Daihatsu Motor) suspended some production at its headquarters in Osaka Prefecture due to the spread of novel coronavirus infection from a supplier. On January 20, Dafa Motor said that from January 21, the shutdown of the plant would be extended for another two days, resulting in a four-day suspension of some production. Dafa had already begun to cut production after about 30 workers at a factory in (Shiga), Shiga prefecture, were infected with novel coronavirus.

The surge in novel coronavirus cases has led to a shortage of other spare parts. Honda said on January 20th that it expected passenger car production at its Suzuka plant in Sanzhong prefecture to be 10 per cent lower than planned. Previously, the factory had been operating according to the production plan. The Yorii plant in Honda's Saitama prefecture cut production by 10 per cent in January and is expected to resume normal production in February.

In November, Honda expected its global production to return to originally planned levels from January. But the continuing epidemic in Southeast Asia has led to a downturn in supply, especially for parts and components using semiconductors. In December, floods in Malaysia brought the business of other parts makers to a standstill.

Nissan cut car production in December and is busy buying parts to restore production. Since December, Suzuki's current capacity is about 70% of what it planned at the beginning of the fiscal year.

In November, Japan's top eight carmakers produced 2.18 million passenger cars worldwide. Although car production in the month was lower than in the same period in 2020, it was up more than 40 per cent from 1.53 million in August. The increase in novel coronavirus cases and the supply chain crisis could delay the recovery of Japanese automakers.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
【Flash | Lumentum cam kết 87 triệu USD để đảm bảo năng lực sản xuất wafer InP của AXT đến năm 2031】
4 giờ trước
【Flash | Lumentum cam kết 87 triệu USD để đảm bảo năng lực sản xuất wafer InP của AXT đến năm 2031】
Đọc thêm
【Flash | Lumentum cam kết 87 triệu USD để đảm bảo năng lực sản xuất wafer InP của AXT đến năm 2031】
【Flash | Lumentum cam kết 87 triệu USD để đảm bảo năng lực sản xuất wafer InP của AXT đến năm 2031】
AXT và Lumentum đã ký thỏa thuận đặt chỗ công suất ràng buộc cho tấm nền bán dẫn Indium Phosphide (InP) đến hết ngày 31 tháng 12 năm 2031. AXT sẽ dành công suất sản phẩm tối thiểu hàng năm và hỗ trợ công suất bổ sung, trong khi Lumentum sẽ cung cấp hai khoản đặt cọc 43,5 triệu USD, tổng cộng 87 triệu USD, được áp dụng dưới dạng tín dụng giao hàng. Lumentum chịu trách nhiệm đối với các khoản thiếu hụt mua hàng hàng năm, tùy theo các ngoại lệ được quy định, trong khi việc AXT không giao đủ công suất tối thiểu sẽ cấu thành vi phạm nghiêm trọng. SMM đánh giá cam kết sáu năm này là tín hiệu nhu cầu vững chắc đối với tấm nền InP và indium độ tinh khiết cao. Khối lượng tấm bán dẫn, cơ cấu đường kính và mức tiêu thụ indium tương ứng không được tiết lộ.
4 giờ trước
EcoPro BM và Samsung SDI ký biên bản ghi nhớ phát triển vật liệu pin thể rắn
4 giờ trước
EcoPro BM và Samsung SDI ký biên bản ghi nhớ phát triển vật liệu pin thể rắn
Đọc thêm
EcoPro BM và Samsung SDI ký biên bản ghi nhớ phát triển vật liệu pin thể rắn
EcoPro BM và Samsung SDI ký biên bản ghi nhớ phát triển vật liệu pin thể rắn
EcoPro BM ngày 6/10 công bố đã ký biên bản ghi nhớ với Samsung SDI để phát triển vật liệu cho pin thể rắn. Sự hợp tác bao gồm vật liệu cathode, chất điện phân cathode và chất điện phân màng ngăn. Samsung SDI sẽ tập trung vào phát triển cell pin và công nghệ sản xuất hàng loạt, trong khi EcoPro BM phát triển vật liệu lõi. Hai công ty sẽ hợp tác về phát triển, đánh giá chất lượng và sẵn sàng sản xuất, hướng tới thương mại hóa pin thể rắn sulfide vào năm 2027.
4 giờ trước
INNOX Lithium ký thỏa thuận tiếp thị dài hạn với Trafigura lên tới 30.000 tấn đến năm 2029
5 giờ trước
INNOX Lithium ký thỏa thuận tiếp thị dài hạn với Trafigura lên tới 30.000 tấn đến năm 2029
Đọc thêm
INNOX Lithium ký thỏa thuận tiếp thị dài hạn với Trafigura lên tới 30.000 tấn đến năm 2029
INNOX Lithium ký thỏa thuận tiếp thị dài hạn với Trafigura lên tới 30.000 tấn đến năm 2029
INNOX Lithium, công ty con của INNOX Advanced Materials, ngày 6/10 công bố đã ký thỏa thuận tiếp thị lithium hydroxide dài hạn với nhà giao dịch hàng hóa toàn cầu Trafigura. Theo công ty, nguồn cung lithium hydroxide độ tinh khiết cao có thể đạt tổng cộng 30.000 tấn đến năm 2029. Trafigura sẽ cung cấp nguyên liệu này cho các nhà sản xuất xe điện và nhà sản xuất vật liệu cathode toàn cầu.
5 giờ trước