SMM Evening Comments (Aug 19): Shanghai Nonferrous Metals Closed Mostly in the Negative Territory with Copper Leading the Losses

Đã xuất bản: Aug 19, 2021 19:00 (GMT+8)
Shanghai nonferrous metals market mostly closed in the negative territory amid a surging US dollar index and hawkish market signals.

SHANGHAI, Aug 19 (SMM) – Shanghai nonferrous metals market mostly closed in the negative territory amid a surging US dollar index and hawkish market signals.

Shanghai copper plunged 3.27%, aluminium lost 1.68%, lead rose 0.91%, zinc lost 0.97%, tin slid down 0.71%, and nickel plummeted 2.09%.

Copper: The most-traded SHFE 10 copper contract closed down 3.27% or 2250 yuan/mt to 66610 yuan/mt, with open interest up 21800 lots to 118000 lots. Intraday 09 – 10 copper contract spread fluctuated wildly, with a widening backwardation which once fell into the rangebound of 180-190 yuan/mt. 09 – 11 copper contract spread also maintained backwardation.

On the macro front, the meeting minutes of overnight Fed meeting showed that decision-makers have not yet decided on the timeline of tapering asset purchase. But some officers suggested that the Fed is likely to reach the threshold for a tapering decision within this year. Negative sentiment kept spreading. On the other hand, US dollar index touched a new high in nine months, pressuring on non-ferrous metals. LME copper prices were still falling, which hit US$8800/mt as of the time of this writing, indicating the directions of copper market. Also, residents near MMG Ltd’s Las Bambas copper mine in Peru lifted the blockade of a road used to transport the Las Bambas copper mine in Peru after accepting the proposal from President Pedro Castillo’s socialist administration.

Tonight, the market shall pay attention to US jobless claims in the week ended August 14, as well as US Philadelphia Fed Manufacturing Index for August. Whether the market’s worries over inflation could be eased will decide the trending of SHFE copper.

Aluminium: The most-traded SHFE aluminium contract closed down 1.68% to 19955 yuan/mt.

On the macro front, market risk appetite continued to fall amid less-than-expected Chinese economy performance in July as well as unexpectedly slower US retail sales data. On the fundamentals, de-stocking was slowing down, and market worries that social inventories would turn to re-stocking soon. While power supply will remain disrupted in the near future, bringing down aluminium output in July, which offered some support to aluminium futures prices. Aluminium output is likely to be restrained further amid intensified environmental protection requirements.

Lead: The most-traded SHFE 2109 lead closed up 0.91% or 140 yuan/mt to 15465 yuan/mt, with open interest down 11170 lots to 71614 lots. Spot holders were still unwilling to sell, and secondary lead discounts failed to rise following the rally in lead prices. Downstream sector mostly held wait-and-see attitude with limited actual transactions. Tonight, investors shall watch if SHFE lead prices could challenge 15500 yuan/mt as initial target.

Zinc: The most-traded SHFE 2109 zinc closed down 0.97% to 22420 yuan/mt, with open interest down 20555 lots. The macro front was bearish amid a hawkish signal from Fed’s meeting minutes and rising US dollar index. On the fundamentals, spot prices fell while downstream inquiries were cautious. Inventories of SHFE zinc under warrant fell from the previous trading day.

Tin: The most-traded SHFE 2109 tin closed down 0.71% at 240760 yuan/mt, with open interest down 877 lots. In terms of daily chart, long capitals chose to reduce their lots and left the market as the intraday prices failed to sustain its gaining twice, subsequently pulling back prices. It showed that long capitals were willing to exit the market, and meanwhile, they lacked the capability to further push up prices for the moment.

On the fundamentals, domestic plants and mines resumed production, easing the currently tightened supply to some extent. Generally speaking, there is an increasingly higher possibility that the uptrend in prices will come to an end soon.

However, if prices were able to break the 240000 yuan/mt support, a possible up-correction could be expected.

Nickel: The most-traded SHFE 2109 nickel closed down 2.09% or 1090 yuan/mt at 141220 yuan/mt, with open interest down 10808 lots to 94000 lots.

On the fundamentals, nickel prices will limited uptrend room in light of a weakening stainless steel prices, but are likely to stay high supported by strength in raw materials.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
【Flash | Phụ phí ống chứa molypden tháng 10 của Tubacex biến động trái chiều】
3 giờ trước
【Flash | Phụ phí ống chứa molypden tháng 10 của Tubacex biến động trái chiều】
Đọc thêm
【Flash | Phụ phí ống chứa molypden tháng 10 của Tubacex biến động trái chiều】
【Flash | Phụ phí ống chứa molypden tháng 10 của Tubacex biến động trái chiều】
Tubacex đã công bố phụ phí hợp kim ống tháng 10. Tính theo euro, thép 316/316L cán nóng/nguội giảm từ €5,07/€5,59 mỗi kg (€5.070/€5.590 mỗi tấn) xuống €5,05/€5,56 mỗi kg (€5.050/€5.560 mỗi tấn). Các loại vật liệu có hàm lượng Mo cao, với Mo trên 2,5%, giảm từ €5,26/€5,79 xuống €5,23/€5,76 mỗi kg. Phụ phí cho 2205 và 2507 không đổi, trong khi 254 SMO tăng từ €9,64/€10,62 lên €9,67/€10,65 mỗi kg. Phân tích của SMM: hầu hết các loại ống chứa Mo đều đi ngang hoặc giảm nhẹ, trong khi 254 SMO tăng, cho thấy sự truyền tải chi phí có sự khác biệt giữa các loại thép.
3 giờ trước
【Tin nhanh | Metallus tăng phụ phí molypden tháng 10 cho thép 300M】
3 giờ trước
【Tin nhanh | Metallus tăng phụ phí molypden tháng 10 cho thép 300M】
Đọc thêm
【Tin nhanh | Metallus tăng phụ phí molypden tháng 10 cho thép 300M】
【Tin nhanh | Metallus tăng phụ phí molypden tháng 10 cho thép 300M】
Metallus công bố phụ phí nguyên liệu thô tháng 10 áp dụng từ ngày 1–30/10. Thành phần Mo cho thép 300M tăng 0,52% lên 15,176 USD/cwt, tương đương khoảng 334,57 USD/tấn thép, từ mức 15,098 USD/cwt, tức 332,85 USD/tấn. Tổng phụ phí niêm yết tăng 1,03% lên 45,054 USD/cwt. Phế liệu tăng lên 17,750 USD/cwt, trong khi phụ phí năng lượng riêng cho thép thanh và thép ống giảm từ 1,296 USD/cwt, khoảng 28,57 USD/tấn, xuống còn 0,050 USD/cwt, tức 1,10 USD/tấn.
3 giờ trước
【Flash | Alleima tăng phụ phí tháng 10 cho các mác ống chứa Mo】
3 giờ trước
【Flash | Alleima tăng phụ phí tháng 10 cho các mác ống chứa Mo】
Đọc thêm
【Flash | Alleima tăng phụ phí tháng 10 cho các mác ống chứa Mo】
【Flash | Alleima tăng phụ phí tháng 10 cho các mác ống chứa Mo】
Alleima tăng phụ phí hợp kim ống tại châu Âu, châu Á, châu Phi và châu Đại Dương từ ngày 1 tháng 10. Đối với sản phẩm cán nóng, 316/316L tăng từ 5,26 euro/kg (5.260 euro/tấn) lên 5,33 euro/kg (5.330 euro/tấn); High Mo từ 5,74 euro/kg (5.740 euro/tấn) lên 5,81 euro/kg (5.810 euro/tấn); SAF 2205 và SAF 2507 tăng lần lượt 2,26% và 1,95%; và 254 SMO tăng 0,70%. Phụ phí năng lượng cho sản phẩm cán nóng tăng hơn gấp đôi lên 0,21 euro/kg (210 euro/tấn). Phân tích của SMM: Phụ phí chứa molypden nhìn chung tăng, nhưng việc điều chỉnh lại phụ phí năng lượng đồng nghĩa mức tăng tổng thể không thể quy hoàn toàn cho molypden.
3 giờ trước