[summary of SMM Morning meeting] the arrival of electrolytic aluminum is increasing and the demand is slightly weak. the supply of goods in the spot market was slightly loose yesterday.

Đã xuất bản: Jul 22, 2020 09:59 (GMT+8)

SMM internal aluminum morning meeting minutes on July 22nd: basic metals rose across the board yesterday. Lomalco closed at $1699 a tonne yesterday, down 2.23 per cent, up $37 per tonne, while Shanghai Aluminium's main 2008 contract rose Rmb150,150, or 1.05 per cent. The dollar index fell 0.64 per cent to 95.186.

Macro aspect: 1) according to the real-time statistics released by Johns Hopkins University in the United States, as of July 22, 2020, there were 14835470 confirmed cases and 613710 deaths worldwide. Among them, there were 3884988 confirmed cases and 141817 deaths in the United States. (bearish) 2) the Bureau of Statistics said on Tuesday that there was a budget deficit of 35.5 billion pounds in June, bringing borrowing to a record 127.9 billion pounds in the first three months of the fiscal year, and the debt / GDP ratio reached 99.6 percent, the highest since 1961. Jia Xing, vice president and secretary general of the China Nonferrous Metals Industry Association, pointed out on the 21st that China's non-ferrous metals industry showed a trend of bottoming out and recovery in the first half of this year, and is expected to maintain a trend of recovery in the second half of this year. In the first half of the year, the added value of China's non-ferrous metals industry fell 4.1 per cent from the same period last year to 0.7 per cent year-on-year growth, returning to positive growth; the output of non-ferrous metals was 29.282 million tons, up 2.9 per cent from the same period (lidocaine)

Fundamentals: 1) Bureau of Statistics: in June 2020, the national aluminum output was 5.565 million tons, with a cumulative output of 26.458 million tons, an increase of 20.70% over the same period last year and a cumulative increase of 7.80%. In June 2020, the national output of aluminum alloy was 822000 tons, with a cumulative output of 4.144 million tons, an increase of 11.80 percent over the same period last year and a cumulative increase of 1.00 percent. In June 2020, China produced 3.015 million tons of electrolytic aluminum, with a cumulative output of 17.889 million tons, an increase of 0.80 percent over the same period last year and a cumulative increase of 1.70 percent. (negative) 2) Alumina: in the spot market, electrolytic aluminum mills and traders are in a wait-and-see mood to the previous sharp rise in aluminum prices and rapidly rising alumina quotations, and some holding traders have lowered their quotations, but the actual transaction size of the market is very limited. In the short term, we need to continue to pay attention to the changes of downstream purchasing intention, and in the long run, we need to pay attention to the marginal changes in (neutral) 3) according to the data of the Federation of passengers, the wholesale sales of passenger cars in the first half of the year were 7.667 million, down 22.9% from the same period last year, and the retail sales were 7.709 million, down 22.5% from the same period last year. The passenger car market is expected to decline by 11% in 2020 compared with the same period last year. (bullish)

Yesterday, the spot price of aluminum ingots in Wuxi area was 14400mur14420 yuan / ton, and that in Shanghai area was 14390mur14410 yuan / ton, which was 90 yuan / ton lower than the absolute price of the previous day. The spot water price in the market was around 180mur200 yuan / ton, which was about 60 yuan / ton lower than yesterday, and the price in Hangzhou area was between 14420 and 14440 yuan / ton. Due to the increase in arrival and weaker consumption, the supply of goods in the East China market yesterday was obviously more relaxed than that of the previous day, and the shippers were more active, with more brands quoted, but under the background that the procurement plan of a large household was less than 10,000 tons, the middleman's willingness to receive goods was relatively mediocre, and the trading between the two sides was flat, and the heat of transaction dropped obviously after 11:00. Downstream on-demand delivery, some traders feedback, because yesterday's prices are lower than yesterday, stack the day before the replenishment is not much, the purchase volume increased yesterday. This morning, spot transactions focused on rising water around 150 yuan / ton in the same month.

Summary: in the macro aspect, under the background of continuing to implement positive and prudent fiscal and monetary policies to promote economic recovery, the domestic non-ferrous metals industry has ushered in a good trend. From a fundamental point of view, the output of aluminum, aluminum alloy and other downstream branch products in the electrolytic aluminum industry chain in June ushered in a large increase. The downstream demand is OK. The supply of electrolytic aluminum in society has eased slightly recently, and warehouse receipt inventory is still low. On the whole, the price of electrolytic aluminum is still supported by fundamentals, and it is expected that the trend of aluminum price will still be strong in the short term in the future.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
3 giờ trước
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Đọc thêm
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Nhà máy cán nhôm tiên tiến của Henan Yirui bắt đầu sản xuất, hướng tới tăng trưởng thị trường cao cấp
Ngày 20/9, máy cán thô tấm dày thuộc dự án sản xuất thông minh vật liệu mới nhôm công suất 720.000 tấn/năm của Công ty TNHH Công nghệ Vật liệu mới Hà Nam Yirui chính thức đi vào sản xuất. Với tổng vốn đầu tư 1,5 tỷ nhân dân tệ, dự án tận dụng mặt bằng nhà xưởng hiện có để xây dựng dây chuyền cán nóng liên tục “1+4” tiên tiến quốc tế, được hỗ trợ bởi các thiết bị gia công nhôm hàng đầu ngành như lò nung lại kiểu đẩy. Dự án còn xây dựng hệ thống IoT công nghiệp có khả năng giám sát thời gian thực và điều chỉnh động các thông số sản xuất cốt lõi như lực cán và nhiệt độ, đảm bảo hiệu quả chất lượng ổn định của các sản phẩm nhôm cao cấp và không ngừng nâng cao thị phần các sản phẩm giá trị gia tăng cao.
3 giờ trước
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
3 giờ trước
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Đọc thêm
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Guinea Mở Rộng Hợp Tác Khai Khoáng với Glencore, Hướng tới Tăng Doanh Thu và Công Nghiệp Hóa
Guinea có kế hoạch mở rộng hợp tác với Glencore sang lĩnh vực tinh luyện alumina, năng lượng, vàng và kim loại cơ bản, nhằm tăng nguồn thu từ khai khoáng, thúc đẩy chế biến tại chỗ và công nghiệp hóa tài nguyên khoáng sản, đồng thời tăng cường hợp tác với các thị trường và doanh nghiệp khai khoáng quốc tế tại Trung Quốc, Trung Đông và nhiều nơi khác.
3 giờ trước
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
3 giờ trước
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
Đọc thêm
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
Đỉnh Phong Nhôm khởi công giai đoạn II, hướng tới công suất 200.000 tấn/năm tại Campuchia
Ngày 21/9, lễ khởi công Giai đoạn II (Dự án A3) của Công ty TNHH Nhôm Đỉnh Phong (Campuchia), công ty con của Tập đoàn Địa Hàng, đã được tổ chức. Tọa lạc tại Đặc khu kinh tế Quốc lộ 6, tỉnh Kampong Cham, Campuchia, Nhôm Đỉnh Phong chủ yếu hoạt động trong lĩnh vực nghiên cứu phát triển và sản xuất thanh nhôm hợp kim cao cấp, nhôm định hình cao cấp và các sản phẩm phụ trợ cho xe năng lượng mới, được trang bị đầy đủ quy trình sản xuất và thiết bị bao gồm nấu chảy, đùn ép, anot hóa, gia công sâu, gia công chính xác và xử lý bề mặt. Khi Giai đoạn II đi vào hoạt động toàn bộ, công suất sản xuất hàng năm sẽ đạt 200.000 tấn, với giá trị sản lượng hàng năm lên tới 700 triệu USD. Giai đoạn II (Dự án A3) được quy hoạch bao gồm xưởng gia công xe năng lượng mới rộng 24.340 m² (nhà kết cấu thép một tầng), xưởng đùn ép rộng 15.291 m² và các công trình phụ trợ như nhà văn phòng, nhà bảo vệ và trạm phân phối điện.
3 giờ trước
[summary of SMM Morning meeting] the arrival of electrolytic aluminum is increasing and the demand is slightly weak. the supply of goods in the spot market was slightly loose yesterday. - Shanghai Metals Market (SMM)