The Minister of South Africa renews the conjecture of mine-end supply at the peak of the epidemic.

Đã xuất bản: Jul 10, 2020 11:06 (GMT+8)

On 9 July, the Government of South Africa released a speech by Minister Zwerimhertz (Zweli Mkhize) to brief Parliament on the latest situation of the COVID-19 pandemic of the coronavirus.

According to Mhertz's report, since the release of the latest scientific model results in May 2020, the government has synchronously updated the national COVID Epi model, used South African hospitalization data to estimate virus reproduction and adjust detection methods, and re-modeled COVID-19 in areas with different infection levels. The latest model predicts that the country is expected to reach its peak in mid-August, which is close to the previous forecast, but the expected number of infections during the peak period will be lower than previously expected. This means that in an optimistic scenario, the number of infections from May to June is also lower than previously expected. At the same time, it was indicated that it was expected that the currently planned hospital beds in the Eastern Cape and Gauteng provinces would not be sufficient to meet the demand for non-ICU beds and overflow when ICU capacity was insufficient. It is expected that there will be a shortage of beds in the next four weeks (including all currently committed public and private sector beds).

When the blockade was imposed in South Africa on March 24, the South African government predicted the outbreak period for the first time in June. Judging from the actual infection situation, the prediction was too accurate and scientific, and the number of new infections continued to break through the new high. After adjusting the national COVID Epi model in May, the outbreak peak was changed from the end of August to early September. Although the government has re-regionally raised the blockade level, it abandoned the blockade again in view of the difficulty of re-implementation and the sharp decline in exports, which is an "unbearable burden" on the South African economy.

The latest outbreak forecast released by the South African government is about half a month ahead of the second forecast. Judging from the current public statement by the government and relevant reports from South Africa, it is less likely that the government will upgrade the blockade level again in mid-August to deal with the epidemic, but it is very worrying whether the actual outbreak of infection in major ports and the shortage of beds will once again drag down the country's transport and production efficiency. According to industry estimates, the efficiency of port Elizabeth is still only 70% of what it was before the outbreak since the blockade was downgraded to phase 3 in June.

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
【Flash | Phụ phí ống chứa molypden tháng 10 của Tubacex biến động trái chiều】
18 giờ trước
【Flash | Phụ phí ống chứa molypden tháng 10 của Tubacex biến động trái chiều】
Đọc thêm
【Flash | Phụ phí ống chứa molypden tháng 10 của Tubacex biến động trái chiều】
【Flash | Phụ phí ống chứa molypden tháng 10 của Tubacex biến động trái chiều】
Tubacex đã công bố phụ phí hợp kim ống tháng 10. Tính theo euro, thép 316/316L cán nóng/nguội giảm từ €5,07/€5,59 mỗi kg (€5.070/€5.590 mỗi tấn) xuống €5,05/€5,56 mỗi kg (€5.050/€5.560 mỗi tấn). Các loại vật liệu có hàm lượng Mo cao, với Mo trên 2,5%, giảm từ €5,26/€5,79 xuống €5,23/€5,76 mỗi kg. Phụ phí cho 2205 và 2507 không đổi, trong khi 254 SMO tăng từ €9,64/€10,62 lên €9,67/€10,65 mỗi kg. Phân tích của SMM: hầu hết các loại ống chứa Mo đều đi ngang hoặc giảm nhẹ, trong khi 254 SMO tăng, cho thấy sự truyền tải chi phí có sự khác biệt giữa các loại thép.
18 giờ trước
[SMM Tin nhanh Thép không gỉ] Giá phế liệu thép không gỉ Ấn Độ phân hóa khi 304 giảm theo niken và 316 khan hiếm giữ vững
18 giờ trước
[SMM Tin nhanh Thép không gỉ] Giá phế liệu thép không gỉ Ấn Độ phân hóa khi 304 giảm theo niken và 316 khan hiếm giữ vững
Đọc thêm
[SMM Tin nhanh Thép không gỉ] Giá phế liệu thép không gỉ Ấn Độ phân hóa khi 304 giảm theo niken và 316 khan hiếm giữ vững
[SMM Tin nhanh Thép không gỉ] Giá phế liệu thép không gỉ Ấn Độ phân hóa khi 304 giảm theo niken và 316 khan hiếm giữ vững
Thị trường thép phế liệu không gỉ của Ấn Độ diễn biến trái chiều trong tuần kết thúc vào ngày 1 tháng 10. Giá phế liệu 304 nội địa giảm nhẹ và giá chào nhập khẩu cũng theo xu hướng giảm, trong khi giá 316 giữ ổn định ở cả thị trường nội địa và nhập khẩu. Giá niken trên LME suy yếu gây áp lực lên tâm lý đối với 304, và người mua chỉ mua theo nhu cầu trước mắt khi giao dịch chậm lại trong kỳ lễ hội. Nguồn cung khan hiếm đã hạn chế đà giảm của 316. Về thu mua, thời gian xử lý ngắn sau khi chính phủ nới lỏng yêu cầu về Giấy chứng nhận kiểm định trước khi giao hàng (PSIC), cùng với chi phí nhập khẩu tăng thêm, tiếp tục hạn chế sự linh hoạt của các nhà máy. Một số nhà máy đang cân nhắc phôi, tấm slab và gang niken (NPI) như các lựa chọn thay thế phế liệu để quản lý chi phí đầu vào. Nhìn xa hơn, đề xuất của EU về việc hạn chế xuất khẩu phế liệu kim loại sang Ấn Độ theo Quy định vận chuyển chất thải (WSR) mới, nếu được thông qua, sẽ tiếp tục thu hẹp các lựa chọn nhập khẩu phế liệu của Ấn Độ. Trong ngắn hạn, phế liệu 304 chịu áp lực giảm nhẹ nếu niken vẫn yếu, trong khi 316 dự kiến sẽ duy trì ổn định chừng nào nguồn cung còn thắt chặt. Các diễn biến về PSIC và tính kinh tế tương đối của phôi và NPI sẽ là những yếu tố chính cần theo dõi.
18 giờ trước
【Tin nhanh | Metallus tăng phụ phí molypden tháng 10 cho thép 300M】
18 giờ trước
【Tin nhanh | Metallus tăng phụ phí molypden tháng 10 cho thép 300M】
Đọc thêm
【Tin nhanh | Metallus tăng phụ phí molypden tháng 10 cho thép 300M】
【Tin nhanh | Metallus tăng phụ phí molypden tháng 10 cho thép 300M】
Metallus công bố phụ phí nguyên liệu thô tháng 10 áp dụng từ ngày 1–30/10. Thành phần Mo cho thép 300M tăng 0,52% lên 15,176 USD/cwt, tương đương khoảng 334,57 USD/tấn thép, từ mức 15,098 USD/cwt, tức 332,85 USD/tấn. Tổng phụ phí niêm yết tăng 1,03% lên 45,054 USD/cwt. Phế liệu tăng lên 17,750 USD/cwt, trong khi phụ phí năng lượng riêng cho thép thanh và thép ống giảm từ 1,296 USD/cwt, khoảng 28,57 USD/tấn, xuống còn 0,050 USD/cwt, tức 1,10 USD/tấn.
18 giờ trước