Indonesian smelter reiterates its opposition to mineral benchmark prices

Đã xuất bản: May 26, 2020 16:53 (GMT+8)

SMM5 March 26: recently, the Indonesian smelting industry rejected the proposal to buy low-grade nickel ore from nickel miners. Previously, the Indonesian Minister of Energy and Mineral Resources Regulation No. 11 of 2020 on mineral reference prices set out the formula for calculating nickel commodities. The regulation is the third amendment to the 2017 Ministerial Regulation No. 07 on Energy and Mineral Resources, which deals with the process of determining benchmark prices for the sale of metals and coal minerals.

Puri Prihadi Santoso, president of the Indonesian Manufacturing and purification Industry Association, said the Ministry of Industry is working on a price formula to represent smelters. Because the price formula in the regulations often only represents the proposal of the miner, the price of nickel ore purchased from the miner is between $22 and $26.

He said he rejected the formula for calculating the price of nickel in the regulation, and so far no agreement has been reached between mining entrepreneurs and smelters on the price of nickel ore. The Ministry of Industry, represented by the General Administration of Ilmate, still provides guidance on finding win-win solutions, the Ministry of Maritime Affairs and Investment will call back to both sides, and the Ministry of Economic Affairs Coordination hopes to look at the optimization of national tax revenue from a downstream perspective, Prihadi said.

Meydy Katrin Lengkey, secretary general of the Indonesian Nickel Mining Association (APNI), said that the mineral benchmark price (HPM) is the legal umbrella and legal certainty of the miners. Up to now, prior to the ESDM Ministerial decree No. 11 on mineral benchmark prices in 2020, the sales price of nickel ore was determined by the smelting industry. However, since the smelting industry has not yet been agreed through the processing and purification Industry Association (AP3I), the regulation has not been fully implemented.

Meydy said the smelter proposal undermined justice and hurt the miners and was a form of violation of article 33 (3) of the 1945 Constitution, which states that land, water and natural resources are controlled by the state and are used to maximize the prosperity of the people. At present, the basic price reference for the smelting industry is 1.8%, with an average price of US $22 per wet metric ton.

However, the HPM of nickel in May 2020 was US $27.17 per wet metric tonne, and in fact, the production cost per tonne of nickel mine (HPP) reached US $20.34. He said miners would suffer losses of $1057 a tonne.

2020 China Ni-Cr stainless Steel Industry Market and Application Development Forum

Scan the QR code, apply for participation or join the SMM metal exchange group

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
【Flash | ESAB cắt giảm phụ phí quý 4 cho vật liệu hàn chứa Mo】
9 giờ trước
【Flash | ESAB cắt giảm phụ phí quý 4 cho vật liệu hàn chứa Mo】
Đọc thêm
【Flash | ESAB cắt giảm phụ phí quý 4 cho vật liệu hàn chứa Mo】
【Flash | ESAB cắt giảm phụ phí quý 4 cho vật liệu hàn chứa Mo】
ESAB đã công bố phụ phí hợp kim và thuế quan kết hợp tại Mỹ quý 4 năm 2026 đối với kim loại hàn phụ. Phụ phí đối với dây hàn đặc thép không gỉ 316/316L giảm từ 7,08 USD/lb (15,57 USD/kg) trong quý 3 xuống còn 6,26 USD/lb (13,77 USD/kg), trong khi 317/317L giảm xuống 6,72 USD/lb. Duplex 2209 và siêu duplex 2509/2594/2507 giảm nhẹ xuống lần lượt 8,71 USD/lb và 9,02 USD/lb. Dây hàn đặc hợp kim niken ERNiCrMo-3 giảm từ 15,53 USD/lb xuống 13,28 USD/lb. Phân tích của SMM: Phụ phí vật liệu hàn chứa molypden nhìn chung giảm so với quý trước, nhưng phụ phí kết hợp cũng phản ánh chi phí niken, crom và thuế quan, không phải giá giao ngay của molypden.
9 giờ trước
【Flash | NAS tăng giá cơ sở thép không gỉ cán nguội loại 316】
9 giờ trước
【Flash | NAS tăng giá cơ sở thép không gỉ cán nguội loại 316】
Đọc thêm
【Flash | NAS tăng giá cơ sở thép không gỉ cán nguội loại 316】
【Flash | NAS tăng giá cơ sở thép không gỉ cán nguội loại 316】
North American Stainless (NAS), thuộc Acerinox, cho biết các sản phẩm cán nguội loại 316 xuất xưởng từ ngày 1 tháng 10 sẽ có giá cơ sở cao hơn thông qua việc giảm hai điểm chiết khấu chức năng. Tất cả các yêu cầu báo giá đang có hiệu lực đều phải tuân theo điều chỉnh này. Đây là thay đổi về cơ chế giá cơ sở chứ không phải phụ phí hợp kim hàng tháng.
9 giờ trước
[SMM Tin nhanh Niken] Nhà máy luyện niken Indonesia đối mặt đơn yêu cầu PKPU
10 giờ trước
[SMM Tin nhanh Niken] Nhà máy luyện niken Indonesia đối mặt đơn yêu cầu PKPU
Đọc thêm
[SMM Tin nhanh Niken] Nhà máy luyện niken Indonesia đối mặt đơn yêu cầu PKPU
[SMM Tin nhanh Niken] Nhà máy luyện niken Indonesia đối mặt đơn yêu cầu PKPU
PT Metal Smeltindo Selaras (MSS), một nhà máy luyện niken do Trung Quốc đầu tư tại Morowali, Trung Sulawesi, đang đối mặt với đơn yêu cầu PKPU do công ty khai thác và kinh doanh niken PT Mineral Maju Sejahtera đệ trình. Vụ việc được đăng ký tại Tòa án Thương mại Trung Jakarta vào ngày 29 tháng 9 năm 2026, với phiên điều trần đầu tiên dự kiến vào ngày 8 tháng 10. MSS vận hành một nhà máy luyện RKEF với tám lò và công suất feronickel mục tiêu khoảng 600.000 tấn/năm. Chưa có xác nhận về việc đình chỉ sản xuất.
10 giờ trước