[SMM analysis] what will be the performance of the limited change of processing fees for domestic zinc concentrate in May and June?

Đã xuất bản: May 15, 2020 14:18

SMM5, March 15: since 2020, with the continuous spread of the global epidemic, Shanghai zinc once hit a new low since 2016, plummeting to 14265 yuan / ton, the profits of mining enterprises were seriously squeezed, most of the mines lost money when zinc prices were low, deliberately controlling the progress of resuming production and the willingness to ship, so the shortage of domestic zinc concentrates appeared, and the processing fees of domestic zinc concentrates were gradually reduced. From a high of $6250 / metal tonne at the beginning of the year, it dropped to $5100 / tonne. As of May 18, the processing fee for imported mines was US $160 per dry ton, a decrease of US $150 per dry ton compared with US $310 per dry ton at the beginning of the year.

"Click to view the SMM zinc industry chain database

As far as China is concerned, in May, with the strong trend of zinc in Shanghai and the continuous reduction of zinc concentrate processing fees, the mine losses have been repaired, many mines have turned losses into profits, and the mines that originally only produced and did not sell began to ship one after another. the problem of tight supply at the end of the mine has been alleviated. However, at present, due to the large reduction in processing fees of zinc concentrate and the profit of extrusion smelter, as of May 18, the TC of domestic zinc concentrate is 5100 yuan / metal ton, and some smelters with relatively high cost have lost nearly 300yuan / ton, so some smelters should be overhauled ahead of time. Coupled with the zinc smelter raw material inventory is low, from the current SMM announced TC, is the smelter can accept the lowest price.

Overseas, it is reported that 11 mines in Peru will restart production; the first phase of the Peruvian mining industry will restore 80% of its production capacity. It is understood that the production of Nexa's Cerro Lindo and El Porvenir mines will resume on May 11, and the gradual recovery period is expected to continue until the end of June. Glencore's Antamina mine is expected to remain shut down for a short period of time because of a relatively serious infection, and is not expected to recover until it can ensure the health of the miners. Therefore, as far as zinc is concerned, Peru, as the second largest producer of zinc mines in the world, has a relatively limited actual recovery. Overall, overseas zinc mines are expected to be tight from June to July. SMM expects that changes in domestic zinc concentrate processing fees will be limited by the end of May, but in June, due to the impact of imported mines from Peru and other countries, it is expected that there will be room for reduction in zinc concentrate processing fees.

With the escalation of global trade disputes in 2019 and the downward pressure on the global economy, central banks began a wave of interest rate cuts. At the same time, the meeting of the political Bureau of the CPC Central Committee stressed that at present and for some time to come, the basic trend of China's economic stability and long-term improvement will remain unchanged, and 2020 will also be the year when China will build a moderately prosperous society in an all-round way and the 13th five-year Plan ends. In this context, the new crown virus is rampant all over the world, and it is worth looking forward to how to achieve steady economic growth.

In the zinc market, overseas mines will increase production step by step in 2019, but the increase in domestic mine production will be repeatedly hindered. In the first quarter of 2020, zinc prices fell through the mine cost line, mine profits plummeted, and how smelters and mine profits will be distributed in 2020. can overseas mines be expected to be put into production under the disturbance of the epidemic situation? In addition, the output of domestic refining zinc smelters broke through the bottleneck in 2019 and refreshed the all-time high. Under the disturbance of the supply end of zinc mines in 2020, can the capacity utilization rate of smelters maintain a high load? Whether the infrastructure investment under the tone of "stabilizing the economy" in 2020 can exceed the expected performance, whether the super-seasonal performance of the galvanizing industry can still be expected, and whether the contradiction between supply and demand of zinc may reverse in 2020, paying attention to and laying out structural opportunities is another option. Can zinc prices pick up in 2020?

In view of the above topics, SMM will invite industry bigwigs, industry professionals, upstream and downstream enterprises of the industry chain to hold the "2020 (15th) lead and Zinc Summit" in Changsha to discuss the current situation and problems faced by the industry, as well as future development prospects, and analyze the fundamentals and the future trend of zinc prices.

Click to sign up for SMM 2020 (15th) lead and Zinc Summit

Scan the QR code to sign up for the lead and zinc summit and fill in the personal information at the end of the page, and the conference staff will contact you later!

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Sản lượng kẽm Sasa của CAML tăng 5% trong nửa đầu năm; giữ nguyên dự báo năm 2026
28 Aug 2026 20:12
Sản lượng kẽm Sasa của CAML tăng 5% trong nửa đầu năm; giữ nguyên dự báo năm 2026
Đọc thêm
Sản lượng kẽm Sasa của CAML tăng 5% trong nửa đầu năm; giữ nguyên dự báo năm 2026
Sản lượng kẽm Sasa của CAML tăng 5% trong nửa đầu năm; giữ nguyên dự báo năm 2026
Central Asia Metals (CAML) báo cáo sản lượng kẽm trong tinh quặng đạt 9.094 tấn tại mỏ Sasa trong nửa đầu năm 2026, tăng 5% so với cùng kỳ năm trước, trong khi sản lượng chì trong tinh quặng tăng 6% lên 13.312 tấn. Công ty cho biết chương trình cải tiến hoạt động triển khai vào nửa cuối năm 2025 đã bắt đầu mang lại kết quả. CAML giữ nguyên dự báo sản lượng năm 2026 ở mức 18.000–20.000 tấn kẽm trong tinh quặng và 26.000–28.000 tấn chì trong tinh quặng. Nhờ sản lượng và giá kim loại tăng, doanh thu tập đoàn tăng 46% so với cùng kỳ lên 145,5 triệu USD, trong khi EBITDA tăng 89% lên 75,5 triệu USD.
28 Aug 2026 20:12
Giá kẽm tăng đẩy chi phí nguyên liệu thô của các nhà sản xuất oxit kẽm lên cao, kéo theo việc tăng giá.
28 Aug 2026 18:17
Giá kẽm tăng đẩy chi phí nguyên liệu thô của các nhà sản xuất oxit kẽm lên cao, kéo theo việc tăng giá.
Đọc thêm
Giá kẽm tăng đẩy chi phí nguyên liệu thô của các nhà sản xuất oxit kẽm lên cao, kéo theo việc tăng giá.
Giá kẽm tăng đẩy chi phí nguyên liệu thô của các nhà sản xuất oxit kẽm lên cao, kéo theo việc tăng giá.
【SMM Flash 】Giá kẽm tăng đã đẩy chi phí nguyên liệu của các nhà sản xuất kẽm oxit tăng lên. Theo nguồn tin thị trường, một số nhà sản xuất dự định tăng báo giá sản phẩm, với mức điều chỉnh giá từ 100–300 nhân dân tệ/tấn.
28 Aug 2026 18:17
Giá kẽm tăng cao làm giảm nhu cầu hợp kim kẽm đúc áp lực
28 Aug 2026 18:12
Giá kẽm tăng cao làm giảm nhu cầu hợp kim kẽm đúc áp lực
Đọc thêm
Giá kẽm tăng cao làm giảm nhu cầu hợp kim kẽm đúc áp lực
Giá kẽm tăng cao làm giảm nhu cầu hợp kim kẽm đúc áp lực
【SMM Flash】Giá kẽm tăng trong tuần, gây sức ép lên tình hình đơn hàng hạ nguồn. Người dùng cuối e ngại giá cao và chủ yếu chỉ mua theo nhu cầu thiết yếu, tạo áp lực bán hàng cho các nhà sản xuất hợp kim kẽm đúc. Trong bối cảnh chi phí nguyên liệu thô tăng cao, thị trường lo ngại về sức mua thực tế của mùa tiêu thụ cao điểm “Tháng Chín Vàng” truyền thống.
28 Aug 2026 18:12
[SMM analysis] what will be the performance of the limited change of processing fees for domestic zinc concentrate in May and June? - Shanghai Metals Market (SMM)