[SMM Analysis] the monthly export volume of China's aluminum sheet and strip refreshed a new high in March, and the probability of decline in April was large.

Đã xuất bản: Apr 28, 2020 19:06 (GMT+8)
According to recent data released by the General Administration of Customs, China's aluminum plate and strip exports totaled 256000 tons in March 2020, up 61.03 percent from the previous month and 4.42 percent from last year, and monthly exports refreshed the highest level since July 2018.

According to recent data released by the General Administration of Customs, China's aluminum plate and strip exports totaled 256000 tons in March 2020, up 61.03 percent from the previous month and 4.42 percent from last year, and monthly exports refreshed the highest level since July 2018. The cumulative export volume of aluminum plate and strip in the first quarter of 2020 was 584900 tons, down 11.89 percent from the same period last year.

Source: SMM

In terms of export countries, Mexico, South Korea and Canada are still the top three countries in the export volume of aluminum sheet and strip in China, accounting for 10.07%, 9.47% and 6.28% respectively. In March, the total export volume of the top nine countries accounted for 55.05%, while other countries accounted for 44.95%. The exporting countries are relatively diversified.

Source: SMM

In March, the export volume of aluminum plate and strip increased greatly, mainly due to the influence of Spring Festival factors. Because the Spring Festival holiday in 2020 is earlier than in previous years, the time for enterprises to stop shipping and holiday has also been advanced. Under the background of domestic logistics hindered by the epidemic situation in February, there are some export volumes behind. From historical data, China's aluminum sheet and strip exports from January to February were only 328900 tons, down 19.58% from the same period last year, and in March there was a significant increase in exports compared with 1-2 months. In addition, the depreciation of the RMB in March compared with January-February and the higher Shanghai-London ratio also contributed to the growth of exports to a certain extent.

As far as the export situation in April is concerned, large aluminum plate and strip enterprises in Henan, Shandong, and Fujian, which account for a relatively high proportion of domestic exports, have given feedback. After mid-March, the severity of the epidemic abroad has obviously escalated, and some countries have even closed down their ports. Maritime logistics and transportation has been greatly affected, and after the epidemic has led to the suspension of production by overseas factories, overseas customers often choose to withdraw orders or delay delivery for a long time, resulting in a significant decline in their own foreign trade orders. A Shandong company reported to SMM that its new export orders in April were 30%-40% lower than in March, and it was hard to say how to improve in May-June. At present, there is no clear inflection point for the overseas epidemic, we expect the export volume of aluminum sheet and strip to fall back in April.

(SMM Xuman 021-51595898)

Tuyên bố về Nguồn Dữ liệu: Ngoại trừ thông tin công khai, tất cả dữ liệu khác được SMM xử lý dựa trên thông tin công khai, giao tiếp thị trường và dựa trên mô hình cơ sở dữ liệu nội bộ của SMM. Chúng chỉ mang tính chất tham khảo và không cấu thành khuyến nghị ra quyết định.

Để biết thêm thông tin hoặc có thắc mắc gì, vui lòng liên hệ: lemonzhao@smm.cn
Để biết thêm thông tin về cách truy cập báo cáo nghiên cứu, vui lòng liên hệ:service.en@smm.cn
Tin Liên Quan
Phí gia công phôi nhôm Nam Xương tăng vào ngày 28 tháng 9
28 phút trước
Phí gia công phôi nhôm Nam Xương tăng vào ngày 28 tháng 9
Đọc thêm
Phí gia công phôi nhôm Nam Xương tăng vào ngày 28 tháng 9
Phí gia công phôi nhôm Nam Xương tăng vào ngày 28 tháng 9
Ngày 28/9, phôi nhôm Nam Xương Φ90 được báo giá 24.400 NDT/tấn, phí gia công 230 NDT/tấn (tăng 30 NDT so với phiên giao dịch trước); Φ120 ở mức 24.320 NDT/tấn, phí gia công 150 NDT/tấn (tăng 50 NDT); Φ178 ở mức 24.320 NDT/tấn, phí gia công 150 NDT/tấn (tăng 50 NDT). Giá nhôm giao ngay SMM A00 đạt 24.170 NDT/tấn.
28 phút trước
Phí gia công phôi nhôm Vô Tích tăng ở mọi đường kính
28 phút trước
Phí gia công phôi nhôm Vô Tích tăng ở mọi đường kính
Đọc thêm
Phí gia công phôi nhôm Vô Tích tăng ở mọi đường kính
Phí gia công phôi nhôm Vô Tích tăng ở mọi đường kính
Ngày 28/9, giá nhôm thanh Φ90 tại Vô Tích được báo ở mức 24.550 NDT/tấn, phí gia công 380 NDT/tấn (tăng 50 NDT so với phiên giao dịch trước); Φ120 ở mức 24.420 NDT/tấn, phí gia công 250 NDT/tấn (tăng 40 NDT); Φ178 ở mức 24.400 NDT/tấn, phí gia công 230 NDT/tấn (tăng 50 NDT). Giá nhôm giao ngay SMM A00 đạt 24.170 NDT/tấn.
28 phút trước
Phí gia công phôi nhôm Phật Sơn giữ ổn định vào ngày 28 tháng 9
28 phút trước
Phí gia công phôi nhôm Phật Sơn giữ ổn định vào ngày 28 tháng 9
Đọc thêm
Phí gia công phôi nhôm Phật Sơn giữ ổn định vào ngày 28 tháng 9
Phí gia công phôi nhôm Phật Sơn giữ ổn định vào ngày 28 tháng 9
Ngày 28/9, nhôm phôi Φ90 tại Phật Sơn được báo giá 24.530 NDT/tấn, phí gia công 130 NDT/tấn (đi ngang so với phiên trước); Φ120 ở mức 24.480 NDT/tấn, phí gia công 80 NDT/tấn (đi ngang); Φ178 ở mức 24.480 NDT/tấn, phí gia công 80 NDT/tấn (đi ngang). Giá nhôm giao ngay SMM A00 (Phật Sơn) đạt 24.400 NDT/tấn.
28 phút trước